Used U.a. Bosch Werkstatt-Knebel-Industriepresse for sale (1,244)

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. Bwedpewh Nu Tsfx Ahmeu These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Bwodjwfymnepfx Ahmsu Station 2 Indentation cutting 100x25 mm Adjustable cutting length Used machine in very good condition Refurbished Built in 2000

Condition: used, functionality: fully functional, Year of construction: 1992, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Notching machine Boschert LB12 Super Machine color: Reseda green RAL 6011 Cutting angle: 90° Cutting capacity: 4 mm St42 steel 3 mm stainless steel Connected power: 4 kW Weight: 850 kg Machine equipped with an extra-large machine table with double T-slots parallel to the blade, as well as an additional T-slot at the front of the table, at a 45° angle to the blade 2 stops with a sliding stop bar, 500 mm Internal stop for cutting strips up to 225 mm Plexiglass guard Bedpfewfymzjx Ahmjwu Drive via Flender gearbox-brake motor Used machine, fully functional, in very good condition

Condition: used, Year of construction: 1990, plate thickness 8 mm pressure 60 t notching: width x thickness 310-310-8 mm mm Bwedpfxjxgn Dne Ahmeu weight of the machine ca. 3,5 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, ELGO Positioning System Electric blade gap adjustment. Rear thin sheet metal support/carriage, pneumatic and monobloc, length 700 mm. Square stop 1500 mm + 2 supports of 1000 mm Specifications Cutting length: 3100 mm Max. steel thickness: 10 mm Bwsdpsymyc Refx Ahmsu Max. stainless steel thickness: 6 mm Number of sheet clamps: 15 Motorized back gauge stroke: 1000 mm Main motor power: 14.9 kW Weight: 10,500 kg Machine dimensions (L x W x H): 3900 x 2450 x 2200 mm

Condition: used, power capacity 3,1 Nm volt 0 V ampere 3,25 A weight of the machine ca. 13 kg Bjdpfx Asvt Egkjhmjwu

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Bedpfxeyfw H Re Ahmswu Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Very compact punching and nibbling machine Suitable even for limited space Boschert EL500CNC Z TRUMPF rapid tool change system Punching force: 280 kN (28 tons) Travel distances x- 1000 mm (repositioning up to 9999 mm) y- 580 mm Punching arm overhang: 730 mm Trumpf Gr1-3 (105mm) tool system Labod 32040 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, continuously programmable upwards and downwards. Punching slug extraction Table width left + right: 1100 mm each Table depth: 810 mm Table height: 900 mm Overall width: 2582 mm Overall depth: 2800 mm Overall height: 2080 mm Bodohr A Nvspfx Ahmowu Drive power: 20 kVA Machine weight: 8,300 kg Hydraulic oil capacity: 80 l Color: Reseda green RAL6011/Light gray RAL7035 Machine year of manufacture: 2003 Very well-maintained condition with a lot of accessories Tool cabinet

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Bwsdpjf Sqcyofx Ahmju Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: ready for operation (used), Bosch SG-y1.016.060-00.010 AC servo motor SN:N445, used, normal signs of use, 100% functional, scope of delivery as per photos Bjdpfx Ahotu R Idemjwu

Condition: new, Bosch M601 central unit, part number 1070064837-105, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Bedpfx Ahoi D T U Uemswu

Condition: ready for operation (used), Bosch NT 600 power supply, serial number as shown in the photo, used, minor signs of wear, 100% functional. Bedpfx Ahei D Uaromswu

Condition: ready for operation (used), Bosch SE-B2.010.060-00.000 Brushless servo motor 104-914 588 SN: 000176, used, good condition, 100% functional, scope of delivery as per photos Bwjdpfouzrhhjx Ahmou

Condition: ready for operation (used), Bosch SD-B6.480.020-00.000 servo motor 104-913411 SN: 000066, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bodpfou Ayhljx Ahmewu

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Bodpfx Ahjqx Sxaemswu

Condition: ready for operation (used), Bosch amplifier module SN:C-257745 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Bedsntrx Djpfx Ahmowu

Condition: good (used), BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control panel AC 230V/115V/0,4A/0,8A Bsdpfx Ahepufqhomewu Item condition: Used H2R3C11_2_RD

Condition: ready for operation (used), Bosch 1070064837-105 circuit board, serial number 000880843, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bjdpfx Ahsltr Aqsmewu

Condition: ready for operation (used), Bosch ZS351 1070077997-103 / 1070077297-101 card, serial numbers: 002425656 + 002398732, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bwedpjltr Ausfx Ahmsu

Condition: new, Rexroth MSK050C-0300-NN-M1-UG1-NNN, R911309706 Servo motor AC 600V, 1000 rpm Bwodpfxelkbz Ts Ahmsu Item condition: New Technical data: 5.0 Nm 3,1 A n(max) 4700 min-1 KE(eff) 109,0 V / 1000 min-1 Km 1,77 Nm/A U(max) AC 600 V H1R6A13K5-1_HS 7 kg More servo motors - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2017, operating hours: 80 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: B3070, little used press brake TECHNICAL DETAILS pressing force: 290 t working length: 3100 mm distance between columns: 2550 mm working height: 400 mm Opening width: 515 mm Control system: Cybelec DNC 60 stroke: 250 mm table width: 80 - 220 mm speed: 0 - 150 mm/s pressing speed: 0 - 10 mm/s reset speed: 0 - 120 mm/s MACHINE DETAILS Bedpfx Ahjmidm Tomewu hydraulic pressure: 275 bar Machine power: 18,5 kW machine length: 4900 mm Machine width: 1935 mm Machine height: 2890 mm Machine weight: 20.500 kg EQUIPMENT - 1 x tool 30, 5 x 104 mm, 1000 kN/m - 3 x tool 30, 5 x 104 mm, 1000 kN/m - 1 x tool 88, 3 x 103.5 mm, 500 kN/m - 3 x tool 88, 3 x 103.5 mm, 500 kN/m - 1 x Matrix 85, V 80 mm, H 80 mm, W 95 mm - 3 x Matrix 85, 5 x 104 mm, 1000 kN/m - 1 x Matrix 85, V 40 mm, H 60 mm, W 60 mm - 3 x Matrix 85, V 40 mm, H 60 mm, W 60 mm - 1 x Matrix 88, 16 x 120 mm, 1000 kN/m - 3 x Matrix 88, 16 x 120 mm, 1000 kN/m

Condition: used, Year of construction: 2008, operating hours: 8,188 h, functionality: fully functional, mileage: 57,939 km, power: 72 kW (97.89 HP), first registration: 01/2008, overall weight: 5,000 kg, fuel type: diesel, color: grey, axle configuration: 4x4, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, Equipment: additional headlights, air conditioning, self-propelled work machine: + Boschung + Pony P4T + Registered: 24.01.2008 + 57,939 km; 8,188 operating hours + Hydrostatic transmission (fast/slow), max. speed 45 km/h Bsdszrmfbepfx Ahmjwu + VM diesel engine, 2776 cc, 98 hp, Euro 4 + Switchable all-wheel drive + Front-wheel steering, all-wheel steering + crab steering + Front and rear hydraulics + Front lift + 3-way tipper + Auxiliary headlights + Radio/CD + Air conditioning + 470cm x 145cm x 220cm (l x w x h) + Permissible gross vehicle weight: 5,000 kg + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: ready for operation (used), Year of construction: 2007, punching force: 29 t, total height: 2,020 mm, total width: 3,210 mm, sheet thickness (max.): 4 mm, overall weight: 9,300 kg, product length (max.): 4,900 mm, CNC Punching Machine manufactured in 2007. This BOSCHERT Compact 1000 features a working range of 1,000 × 2,000 mm and a maximum punching force of 280 kN. It is capable of handling workpieces up to 150 kg and can punch holes with a diameter of 105 mm. If you are looking to get high-quality sheet metal punching capabilities, consider the BOSCHERT Compact 1000 machine we have for sale. Contact us for further details. • Condition: Very good technical condition • Machine status: Under power • Previous application: Aluminium sheets, 1–3 mm thickness • Tools included: NoWorking area Bwodpfx Ahozp Hz Romsu • Working range without clamp reduction: 1,000 × 2,000 mm • Maximum X-axis travel with repositioning: 9,999 mm • Maximum workpiece weight: 150 kgPunching unit • Maximum punched-hole diameter in one stroke: 105 mm • Nibbling frequency: 500 strokes/minAxis speeds • Max X-axis positioning speed: 60 m/min • Max Y-axis positioning speed: 30 m/min • Max simultaneous X/Y positioning speed: 67 m/minAccuracy • Machine tolerance (VDI 3441): ±0.1 mmTooling • Manual tool-change time: approx. 15 s • Maximum number of tools with RevoTool: 8 • RevoTool change time: approx. 3 s • Revo Tools shown in the advertisement: Not includedElectrical data • Main circuit breaker: 32 A slow, 50 A • Installed power: 20 kVA / 25 kVA Additional notes • Software requires an update (machine not used for ~2 years) • Loading and transport are not included

Condition: good (used), functionality: fully functional, Boschert EL 300 The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. Bjdpfx Ajznu H Sjhmswu The integrated drawers are ideal for storing punching tools and accessories. The simple operation and quick tool change make this machine accessible to everyone.

Condition: good (used), functionality: fully functional, Boschert Compact Rotation 1000x2000 Equipped with the Trumpf tool system and featuring the Boschert rotation, which enables continuous 360° rotation of the punching tool up to tool size III. Punching force: 28 tons. Spray device. Bedpfx Aeznu T Ejhmswu Chip extraction system.