Used U.a. Bosch Werkstatt-Knebel-Industriepresse for sale (1,249)

Condition: new, Rexroth MSK050C-0300-NN-M1-UG1-NNN, R911309706 Servo motor AC 600V, 1000 rpm Item condition: New Technical data: 5.0 Nm 3,1 A n(max) 4700 min-1 KE(eff) 109,0 V / 1000 min-1 Tedpjlkbz Tsfx Ahmjc Km 1,77 Nm/A U(max) AC 600 V H1R6A13K5-1_HS 7 kg More servo motors - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Bosch SD-A4.140.020-01.000 Brushless servo motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Todpfx Ahei D E R Hjmoc ATTENTION: Please request separate pricing for packaging and shipping!

Condition: ready for operation (used), Bosch SD-B3.031.030-00.000, brushless servomotor, serial number as shown in the photo, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 19 mm, used, significant signs of wear, 100% functional, scope of delivery as shown in the photos. Tedpfxei D E Sve Ahmsc

Condition: ready for operation (used), Bosch SD-B4.070.030-00.000 servomotor, serial number as shown in the photo, hole spacing of the mounting holes: 117 x 117 mm, drive shaft diameter: 24 mm, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Tjdpsi D E Tljfx Ahmoc

Condition: new, Bosch SE-B2.040.030-10.037 servo motor, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Todpfx Aji D Hdyehmjc

Condition: ready for operation (used), Bosch SF-A3.0068.015-10.050 Brushless servomotor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Todsi D Hgfjpfx Ahmoc

Condition: ready for operation (used), Bosch UVF 160L / 4C-21S - UVF 160L/4C-21S servo motor, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as per photos. Tsdpfxsi D Hhke Ahmec NOTE: Please request a separate quote for packaging and shipping costs!

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding Todpfx Aotw S Awohmjc - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: ready for operation (used), Bosch SG-y1.016.060-00.010 AC servo motor SN:N445, used, normal signs of use, 100% functional, scope of delivery as per photos Tedpfx Ahetu R Idjmec

Condition: like new (used), GSH 11VC Professional Rotary Hammer - Weight: 11.4 kg - Absolutely as new - Comes with 3 new chisels Tjdpfx Ahjy R U Nbomjc - 1700 watts - SDS max - Year of manufacture: 2018 Was placed in a service vehicle.

Condition: excellent (used), B66 Rotary Hammer - GBH-12-52 D Todey R U U Rjpfx Ahmoc - 1700 Watt - 230 Volt - Year of manufacture: 2018 - SDS max tool holder Was partially in use.

Condition: good (used), Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Format 1000 x 1000 The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, The plates are cleaned befor delivered. (Example photo) We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. Tsdpjd Ezfmjfx Ahmec You are welcome to ask us for your requirements.

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad Tedsxabpdspfx Ahmsc blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Tedpfx Ashgg Euohmsc Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,496 h, functionality: fully functional, machine/vehicle number: TBS50XV33L31E0522, mileage: 16,303 km, overall weight: 3,500 kg, fuel type: electric, color: orange, maximum load weight: 1,200 kg, empty load weight: 2,300 kg, tire size: 275/60R15, fuel: electricity, driver cabin: day cab, loading space volume: 2 m³, Equipment: CE marking, air conditioning, documentation/manual, type plate available, The item for sale is a Boschung S 2.0 electric street sweeper. Tedpfxez A Dz Ee Ahmoc VIN: TBS50XV33L31E0522 Year: 2020 Battery: 54.4 kWh Unladen weight: 2300 kg GVWR: 3500 kg Payload: 1200 kg Mileage: 16,303 km Operating hours: 2,496 h Sweeping time: 1,390 h Average energy consumption: 5.8 kWh/h Length: 4.6 m Width: 1.6 m Height: 2.0 m Tires: 275/60 R15 Clean water tank: 190 l Waste water tank: 2.0 m³ Additional information: Adjustable sweeping width: (max. 2,300 mm) Two-stage water pump flow control Adjustable turbine speed Adjustable brush speed 360° camera Radio Heated mirrors Manual air conditioning 16A charging cable EUnited PM 10 and PM 2.5 certification Operating manual + service book OUR SERVICES We offer: Preparation of documentation for registration and customs clearance (including EUR.1 and T1) Transportation of the vehicle to any location worldwide Vehicle service after purchase Repairs and routine maintenance of equipment purchased from us Upon customer request: Oil and filter change in the vehicle and its attachments. *Comprehensive service and support at every stage of the process. *Possibility of leasing older vehicles, even those up to 18 years old. *If you would like to know more details, please contact us.

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Tsdpfx Asg Icfpjhmoc Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, mileage: 110,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6 L2 long wheelbase, 4Motion / all-wheel drive with differential lock, 110 kW, with high-quality equipment, ideal for tradespeople. All-wheel drive (4Motion, 4M, 4x4, 4WD) with mechanical differential lock (switchable) Underride protection for engine/transmission made of aluminum Todpfx Ahjz Dir Somoc Trailer hitch with 2.5 t towing capacity, removable Mounting rails for roof rack Auxiliary heater, air (outlet B-pillar, lower right), programmable Climatic air conditioning with pollen filter Comfort driver and passenger seat with armrests on both sides, foldable, adjustable: - Seat height, backrest, lumbar support Seat cover fabric Simora Driving assistance systems: - PDC Park Distance Control front and rear, optical and acoustic display - Rear view camera - Cruise control - Hill start assist - Fatigue detection - Trailer stabilization - Brake assistant (HBA) - Multi-collision brake - ABS, ASR, ESP Light and Visibility Package - Automatic headlights - Automatic windshield wipers - Automatically dimming interior mirror Audio-navigation system Discover Media (touchscreen color display) - Radio, CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free kit for mobile phone with Bluetooth - Mobile Online Services Car-Net - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multi-function display Plus / trip computer Airbag package: - Front airbags - Side airbags in the seats - Head airbags in the B-pillar Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control 12 V socket front (2x) Spare wheel and jack Fog lights with cornering light 2nd battery with separation relay Wheelbase 3400 mm Sliding door, cargo area with tinted glass Rear door with tinted glass, heated, with windshield wiper Commercial vehicle registration N1 / van Chassis 17" Engine 2.0 L - 110 kW TDI 6-speed manual transmission Steering wheel adjustable Non-smoker package Handles on A-pillars Heat-insulating glazing Heated windshield washer nozzles Cargo area equipment: Workshop fitting by Aluca (similar to Bott, Sortimo, Würth). Left side: shelving system with long storage compartment, storage compartments, cabinet section and 6 drawers. Right side: shelving system with storage compartments, storage compartment, 4 drawers and 4 aluminum tool/small parts cases. Fold-out workbench. Cargo area partition with window, upholstered in the driver's cabin (noise reduction). Robust wooden floor. Cargo securing with lashing eyes and mounting rails. Ceiling upholstered. Ventilation. LED lighting. Cargo area dimensions: - Length bottom: approx. 282 cm - Length middle: approx. 271 cm - Length top: approx. 261 cm - Height: 134 cm Service history from VW: 02.2021 / 27,787 km oil change 07.2021 / 38,350 km inspection + action S546 crit. 02 12.2022 / 71,422 km Insp. + oil change + Haldex clutch oil change 02.2024 / 97,192 km inspection 03.2025 / 99,112 km inspection + oil change + brake fluid 11.2025 / 112,439 km Haldex clutch oil change + air filter Inspection due Mounted tires: Winter tires 215/65 R 16 on steel rims with approx. 6 mm tread depth front and approx. 8 mm rear Additional tires: Summer tires 205/65 R 16 on steel rims with approx. 4/4/5/5 mm tread depth Despite careful processing, input and data transmission errors may occur in the vehicle description including pictures. Errors and prior sale are reserved. The vehicle can be inspected

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Tsdpfx Ahjz Dv Tvomoc Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Tedpfx Ajhxvu Ejhmjc Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Todpfx Ajh U Dtushmoc Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Hydraulic power unit with BOSCH - REXROTH hydraulic pump Hydraulic unit Type: U 120 V4 0.18 No.: 983791 Year of manufacture: approx. 1975 Operating pressure: max. 40 bar Flow rate: 4 liters/min. Motor power: 0.18 kW Tank capacity: approx. 8 liters Power supply: 400 Volts, 50 Hz - Gear pump - Pressure regulator - Return filter Required installation space L x W x H: 350 x 300 x 420 mm Tedpfexrgu Ajx Ahmsc Net weight: 20 kg Good condition

Condition: used, mileage: 313,000 km, power: 338 kW (459.55 HP), first registration: 03/2003, fuel type: diesel, overall weight: 30,000 kg, brakes: retarder, color: black, gearing type: automatic, loading space length: 9,380 mm, loading space width: 2,480 mm, loading space height: 3,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, MAN TGA 18.463 Retarder, Refrigerator, Automatic Transmission For inquiries: 0726565 * Condition: Very good * Power: 338 kW / 463 hp * Displacement: 12,816 cc * Retarder * ABS * ASR * ESP * Differential lock, rear axle * Exterior mirrors and wide-angle mirrors, electrically adjustable and heated * Storage compartment above driver / center / passenger * Air horns on cab roof * Electric sunroof * 2 sleeping berths * Auxiliary heater * Automatic climate control * Pull-out refrigerator under berth * Air-suspended comfort driver's seat * Electric retractable sun visor * Transparent exterior sun visor * Fog lights * Electric windows Tires: Front axle: 385 / 65 R22.5, 35% leaf-sprung Rear axle: 315 / 80 R22.5, 40% air-sprung Berdex OV 1218 | Car transporter | Mobile workshop | Team lounge | LBW Internal number for inquiries: 0726566 * Condition: Very good * First registration: 04/2003 * Aluminum work platforms on the left and right * Permissible total weight: 30,000 kg * Tare weight: 10,420 kg * ABS * EBS * 2-axle air suspension * Interior lighting * 2 refrigerators * Lift tailgate with ramps Dimensions (loading area / cargo space) Loading area length: 9,380 mm Loading area width: 2,470 mm Loading area height: 3,300 mm Lounge / meeting room * Seating area and lifting table * Air conditioning - Fujitsu * TV * Sunroof / glass version Interior dimensions Length: 3,100 mm Width: 2,480 mm Height: 2,070 mm ---- Price: 59,900,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Tedpfszlvgnex Ahmoc Typographical errors, errors and prior sale reserved.

Condition: used, mileage: 185,705 km, power: 130 kW (176.75 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 3,710 kg, maximum load weight: 3,780 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,000 mm, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: ABS, cabin, central locking, crane, cruise control, differential lock, onboard computer, parking heater, traction control, trailer coupling, * German vehicle * Condition: see photos * First owner * Only 185,705 kilometers * Sortimo workshop and shelving system * 300 kg load capacity with cable remote control * Loading platform crane with cable winch * MobiE generator in the box * Type MB 400-16 * ZeBu box body with side door * Rear portal doors with sliding staircase * Side door with staircase * Loading platform crane with Powerwinch cable winch * 350 kg load capacity * Cable remote control * Box dimensions: length 4.00 m x 2.50 m x 2.40 m * Wooden loading floor with load securing rails * DIN lashing eyes * LED interior lighting * Tow hitch * Trailer load 10,510 kg * Total weight 18,000 kg * Tow hitch ball head * Trailer load 3,400 kg * Cab with 2 seats * Air-suspended comfort seat * Seat heating * Auxiliary heater * Electric windows * Electric mirrors * Lane keeping assist system * Telephone Bluetooth * Leaf spring suspension Tedoz Eixzopfx Ahmjc * Wheelbase 3.00 m * Permissible total weight 7,490 kg * Unladen weight 3,710 kg * Payload 3,780 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our website under: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that no false impressions arise regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Year of manufacture: 1994 Technical data Working area & dimensions Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy with 2-axis digital display: ± 0.1 mm Connection power: 4 kVA Control voltage: 220 V Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Tjdpfx Aozp Raqehmsc Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Condition: used, mileage: 116,149 km, power: 88 kW (119.65 HP), first registration: 08/2022, fuel type: diesel, overall weight: 2,240 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Equipment: * Body/superstructure: long van, * Automatic transmission, * Air conditioning, * Seat Package 18, * Double passenger seat, * Load compartment partition with pass-through opening, * Rear hinged doors without glazing, * Workshop equipment on the left and right, Tjdpfjz Ew Epox Ahmoc Technology: * Audio Package 9, * AUX-IN connection, * Rear view camera, * Parking pilot system front and rear, * Headlight assistant with day/night sensor, * On-board computer/trip computer, * Electr., FordPass Connect incl. eCall, * Bi-Xenon headlights with LED daytime running lights, Safety/Environment: * Airbag driver/passenger side, * Anti-slip control (ASR), * Electronic brakeforce distribution (EBD), * Driver assistance system: Emergency brake assist, * Low emissions according to exhaust standard Euro 6, * Start/stop system, Other: * First delivery in Germany, * 1 previous owner, * Truck registration, * Engine 1.5 Ltr. - 88 kW EcoBlue TDCi CAT, * Wheelbase 3062 mm, Retrofitting a trailer hitch is possible for an additional cost. Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway junction. The Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly create an individual offer for you! We are happy to accept your commercial vehicle/construction machine in part exchange. If a new TÜV inspection (German technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, on price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.