Used Ursviken Optima 100 3.1 / 2.55 for sale (24,824)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Ncjdszdn H Repfx Ac Tsu Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, NEW! Njdpfx Aezddp Njc Tscu flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: excellent (used), Here we offer you a chamber dryer. External dimensions approx.: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Internal dimensions approx.: Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Internal volume: 2.2 m³ Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive materials. The chamber heating oven must not be installed in an explosion-proof area. Continuous chain conveying system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Carrier bars: 13 pieces Pitch: 228 mm Carrier bar width: 354 mm Ncodpfx Acszdzixe Tju Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min. Load capacity/carrier bar: max. 10 kg Total load capacity: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), IPG Ytterbium Fiber Laser with Controller Here we offer an IPG Ytterbium Fiber Laser with controller. IPG Ytterbium Fiber Laser Type: YLP-C-1-100-20-20 Nodpfxezdyyvs Ac Tecu Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, SCHUNK DPG 100 parallel gripper, serial number: 370253 + accompanying documents DPG 100/1 and DPG 100/1 S, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Nodpfx Acezd I Eye Tecu

Condition: used, mileage: 3,964 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,300 mm, first registration: 06/2023, color: white, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, parking sensors, seat heater, sliding door, traction control, = Additional options and accessories = - Air conditioning - Rear parking sensors - Front parking sensors - Sliding door on the right side - Android Auto - Apple CarPlay - Automatic high beam - Heated exterior mirrors - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Keyless start - Collision mitigation by braking - Collision warning system - Multimedia capable - Fog lights - Rain sensor - Headlight assistant - Seat heating - Voice control - Lane keeping assist - Immobilizer - Connected services - WiFi hotspot - Windshield heating - Partition = Additional information = General information Number of doors: 5 Model range: Feb. 2022 - 2026 Cabin: standard Technical information Torque: 430 Nm Drivetrain Range: 313 km Transmission Nodpfx Acjzdi Uio Tocu Transmission: 1 gear, automatic Dimensions Length/Height: L2H2 Dimensions (L x W x H): 553 x 206 x 255 cm Weights Unladen weight: 2,494 kg Payload: 1,006 kg GVWR: 3,500 kg Battery Existing battery: Purchased Battery capacity: 68 kWh, Condition: 98% Charging port: Type 2 Suitable for fast charging: yes Fast charging port: Combined Charging System Interior Interior: black Maintenance, history and condition APK (technical inspection): valid until 06.2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), functionality: fully functional, mileage: 830,000 km, fuel type: diesel, overall weight: 10,000 kg, wheelbase: 4,200 mm, fuel: diesel, brakes: engine braking, color: white, emission class: euro3, Year of construction: 2006, Equipment: ABS, air conditioning, airbag, fog lights, full service history, spoiler, RENAULT 100-180 Truck Ncjdpfozgxzwex Ac Teu Platform with tarpaulin cover Year: 07/2006 2 axles, 4x2 Platform with tarpaulin cover Manual transmission Platform length: 6,300 mm Wheelbase: 4,200 mm Overall truck length: 8,1335 mm Gross vehicle weight: 10,000 kg Payload capacity: 5,100 kg Engine: 4,116 cm³ Power: 128 kW (174 HP) Emission standard: Euro 3 Tires: 225/75 R 17.5 – 129/127 M Air conditioning ABS Engine brake Spoiler Radio Electric mirrors and windows Mileage: 830,000 km

Year of construction: 2014, condition: used, functionality: fully functional, This is a 100-liter cooking pot from the premium manufacturer MKN, type Optima 850. The pot is a double-jacketed pot with a separate, integrated, and low-maintenance steam generation system VAPRO for fast heating times and low energy and water consumption, as well as high efficiency. The VAPRO rapid steam system ensures short heating times. In addition, the unit has automatic monitoring and replenishment of the operating water, which keeps it constantly ready for use. The unit has undergone a major inspection in our in-house workshop and is fully functional. The list price is €17,920 net / €21,324.80 gross. Our price is €2,852.94 net / €3,395 gross. You will receive an invoice with VAT shown. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. • High-quality branded equipment at fair prices. • Professional overhaul / inspection & expert cleaning. • Checked & fully functional - or your money back. • Flexible shipping or self-collection options. • Competent advice - before and after purchase. • Provision of operating manuals, connection diagrams & spare parts. • Inspection according to DGUV V3 standard. Technical data: • W x D x H: approx. 800 x 850 x 700 mm • Inner pot: diameter 630 mm, 397 mm deep • Power connection: V: 400 / kW: 21 • Year of manufacture: 2014 • Serial number: 14201533 • Type: 2022804S • Nominal capacity: 130 liters • Usable filling volume: 100 liters Electrical equipment: Device switch, power selection switch, temperature controller, safety temperature limiter, indicator lights, tubular heating element, pilot heating element, contactor, water solenoid valve, level regulator with level electrode, pressure regulator, electrical fixed connection IPX6 Condition: Used, major inspection completed, fully functional Additional information: • Inner pot made entirely of extremely corrosion-resistant chromium-nickel steel (1.4404) • Double-jacketed pot with separate, integrated, and maintenance-free steam generation system VAPRO for fast heating times and low energy and water consumption, as well as high efficiency • Fast heating times and low energy and water consumption, as well as high efficiency. Nedszfhmtopfx Ac Tecu • Short heating times thanks to the VAPRO rapid steam system. • Standard equipment with 3 cooking levels (gentle simmering, medium and strong boiling). • Thermostatic temperature control. • Automatic monitoring and replenishment of the operating water, ensuring constant readiness for use. • Standard equipment with double-walled hinged lid and mixing tap. • Drainage via safety drain valve to the front. Shipping: • Delivery or self-collection by arrangement. • Worldwide shipping on request. • Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are only made subject to our general terms and conditions (AGB).

Condition: used, Drive . kW Capacity . kg/h material . 8 pieces For manipulator A5.1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Nedpsyqvm Tsfx Ac Tjcu Your Markus Hirsch Team

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Ncjdoy H Hk Aepfx Ac Tou Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Steady rest universal swing Ø 100 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Njdpfxjzdirdj Ac Tecu

Condition: good (used), Year of construction: 1998, Features: Used belt conveyor curve 45° Transnorm, left-hand Condition: Fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packed Includes motor and side guide Feet must be ordered separately Color: white 1 unit in stock Technical data: Dimensions of the belt conveyor curve 45° Nominal width approx.: 800 mm Curve angle: approx. 45° Inner radius: 900 mm Belt type: KT 94 Belt conveyor curve Njdpfx Aodr H Hkec Tscu Thanks to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Year of construction: 1999, Horizon booklet maker VAC-100 a VAC-100 m SPF-20 A FC-20 A offer consists of: - air suction collator VAC-100a - air suction collator VAC-100m - stitching and folding SPF-20A - frontcutter FC-20A Horizon VAC-100a / Horizon VAC-100m air-suction collators - technology: touch & work - model: air-suction collator - bins: 10 each collator - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (60 bins) Ncsdpfsxxtyrox Ac Tju programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/qm - loading height: 55mm/ bin - production speed: max. 9.500 cycles/h - power: 230V/50Hz - 1,86kW - dimensions: 842x652x1.961mm - weight: 310kg Horizon SPF-20A stitcher and folder: - format adjustment: fully automatic - DIN-size and standard fold types: preassigned - saveable jobs: 12 memories for special sheet sizes + all DIN sheet sizes - stitching heads: 2 - expandable up to 4 stitching heads - stapling options: top-, side-, cornerstitiching - ring eylete stitiching: with ring eyelet stitching heads possible - inlet format: max. 500x350mm; min. 180x120mm - processing strength: min. 2 pages; max. 22 pages (80g/sqm) - clip distance: min. 73mm - stitching wire: 26 - 28 - production speed: max. 3.600 cycles/h - power: 230V/50Hz - 0,45kW - dimensions: 2.710x810x1.070mm - weight: 490kg Horizon FC-20A fore-edge trimmer: - counter - faulty set ejection - booklet size: max. 250x20mm; min. 85mm - size front cut: max. 20mm - trimming thickness: min. 4 pages / max. 88 pages (80g/sqm) - production speed: max. 3.400 cycles/h - power: 230V/50Hz - 0,2kW - dimensions: 610x810x1.070mm - weight: 240kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Ncjdozd Srwspfx Ac Teu Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: AC, year of last overhaul: 2026, Baumkuchen machine BK 100 1000 mm working width Dipping vat Ncedpfxjy Ac H Ss Ac Tju Base frame with storage shelf 220V Dimensions: 1450 x 700 x 1500 mm (W x D x H) Used machine with warranty

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100-3 downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 6800 KG kg CNC Control Ncedpfx Ajyt H Awjc Teu Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm Nsdjtq Ngbepfx Ac Tocu X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: used, mileage: 21,391 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 01/2023, color: white, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, traction control, = Additional Options and Accessories = - Sliding door on the right side - Automatic headlights - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Hill-hold control - Wooden cargo bed - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar support - Front center armrest - Emergency brake assist - Radio - Rain sensor - Immobilizer - Partition = Additional Information = General Information Number of doors: 5 Model range: July 2020 - Aug. 2022 Cab: single Technical Information Torque: 260 Nm Drivetrain Range: 320 km Transmission Transmission: 1 gear, automatic Performance Maximum speed: 130 km/h Dimensions Length/Height: L2H1 Dimensions (L x W x H): 496 x 192 x 194 cm Weights Unladen weight: 1,988 kg Payload: 1,027 kg GVWR: 3,015 kg Max. towing capacity: 1,000 kg (750 kg unbraked) Battery Existing battery: Purchased Battery capacity: 75 kWh, Condition: 94% Charging port: Type 2 Suitable for fast charging: yes Fast charging port: Combined Charging System Interior Interior: black Ncjdpfjzc Utijx Ac Tju Consumption Average energy consumption: 264 kWh/100km Maintenance, History and Condition APK (Technical Inspection): valid until 01/2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: new, - Dimensions: 1370x190x2000 mm Nedoy Hrf Eopfx Ac Tscu - Capacity: 100 trays - Weight: 109 kg - The steam sensors are designed to be connected to the exhaust of your oven and not to the outlet of the hood, then routed to a drain. - The drain must be connected at the bottom section. - The steam radiators do not operate with the hood suction system. - There is no fan connection.

Condition: used, Year of construction: 2008, Technical details: turning diameter: 190 mm turning length: 503 mm control: Fanuc 31i - TA Travel x/z turret 1: 135 / 503 mm Travel x/z turret 2: 135 /503 mm c-axis: Sp. 1 / 2 Spindle 1 RPM: 6000 1/min Spindle 1 Power: 11/7,5 kW Spindle 1 max. bar diameter: 42 mm Spindle 2 RPM: 6000 1/min Spindle 2 power: 11/7,5 kW Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 6000 1/min Turret 1 power rotary tools: 7,1 / 2,2 kW Nsdpezd T I Hefx Ac Tecu Turret No.2 stations / rotary tools: 12/12 Turret 2 tool RPM: 6000 1/min Turret 2 power rotary tools: 7,1 / 2,2 kW total power requirement: 53 kVA weight of the machine ca.: 5700 t dimensions of the machine ca.: 2,3 x 1,6 x 1,94 m Accerories Chip conveyor right discharge Robot interface High precision cnc turning center, rotary tools and y-axis on upper turret, Robot loader for shafts. *

Condition: ready for operation (used), Mixer Machine, Twin-Shaft Mixer, Z-Arm Mixer Mixer Machine, Twin-Shaft Mixer, Z-Arm Mixer, Used Equipment Nedpfxsu Hknko Ac Tscu Overall dimensions: 1150 x 750 x 1520 mm Weight: 355 kg Hopper size: 530 x 500 x 400 mm Electrical specifications: 400V

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Height: 1800 mm Weight: 2200 kg Ncodoxab Adopfx Ac Tsu Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Magazine Types: UP: 500 mm usable length MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Ncsdpsk Eakvsfx Ac Tju Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Nedolatz Djpfx Ac Tocu Belt length: 2000 mm

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Ncedpfxsyzmage Ac Tou Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water