Used Used Apv N35 Plate Pasteurizer 10246 Kgh for sale (51,121)

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Lrjdpfxozpbrqo Amtsp Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Ljdpjzlx E Tofx Amtorp Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring Lsdoznnd Rspfx Amtsrp machine. Size is 2750 x 1400 x 340 mm.

Condition: used, length n.n. mm width n.n. mm Lrsdpsznndwsfx Amtop total power requirement 0 kW weight of the machine ca. n.n. t dimensions of the machine ca. n.n. m Some spotting plates in different sizes, without table legs. Price per sqm. We have following sizes: 1500 x 1000 mm 1000 x 1000 mm (2 pieces) 1000 x 800 mm 600 x 500 mm 400 x 300 mm 210 x 130 mm round with diameter of 520 mm.

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear Ljdpfxszndq Te Amtjrp - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Installation in a hall Shelf height: 5.400 mm Lredpfx Amjk Abbbjtjp shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Lrsdpfsymayvex Amtop

Condition: good (used), Three-roll bending machine KNUTH KRM 12/2.5, serial number 121008, manufactured in 2000, roll length 125 cm. Ledpfx Aoznl Aqsmterp

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Lodpfx Amsthuzpsterp Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Lrjdpfxsznn Hlo Amtop Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 Lrjdszmy Tbopfx Amtjp total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: used, Year of construction: 2014, operating hours: 997 h, machine/vehicle number: YBA000241, fuel type: diesel, motor manufacturer: Caterpillar 3512, General information Field of application: Construction Weights Empty weight: 14.000 kg Functional Generator capacity: 1.250 kVA Dimensions of cargo space: 565 x 220 x 230 cm Other information Fuel consumption: 196 Liter/Hour at 75% Load Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Production country: US Additional information Please contact Team DPX for more information = Additional options and accessories = Lrodpfszmlpbsx Amtsp - Control Panel

Condition: used, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 20240416011, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG2, General information Field of application: Construction Weights Empty weight: 1.825 kg Functional Generator capacity: 165 kVA Dimensions of cargo space: 305 x 113 x 173 cm CE mark: yes Other information Fuel consumption: 24,7 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 320 l Ledpfx Amjw Dag Eoterp Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Only 5 hrs. Traded-in from customer who needs more power. Warranty is still applicable. Used Generator Set.

Condition: used, Year of construction: 2023, operating hours: 261 h, machine/vehicle number: HEI0009695, fuel type: diesel, motor manufacturer: Baudouin 12M26 G1000/5, General information Field of application: Construction Weights Empty weight: 18.000 kg Functional Generator capacity: 1.016 kVA Dimensions of cargo space: 1219 x 244 x 258 cm CE mark: yes Other information Fuel consumption: 145.2 Liter / Hour at 75% Load Generator: Mecc Alte ECO43 2SN Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Production country: IT Lrsdpfx Amjyv Umkjtep Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Original quick-change plates for Dreistern P3.125 profiling systems. Production direction: left to right. Lrsdpfx Amoy Sxx Aetsp The following quantities and sizes are available: 3 pieces for 2 profiling frames (795x790) 3 pieces for 6 profiling frames (2385x790) Some of the groove blocks are missing, but can be re-manufactured if required. Price per piece.

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm total power requirement 37 kW Lredpfjy Diahex Amtsp weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: excellent (used), tank capacity: 600 l, We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Manufacture: AGA CRYO Volume: 600 litres; Working pressure: 17,5 bar Lodpfxevdb A No Amterp We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Pair of steel angle plates Slots width: 22 mm Oblongs dimensions: 120 x 16 mm Lrodpfx Aozmw R Remtep Width: 150 mm Depth: 445 mm Total height: 600 mm

Condition: used, Pair of cast iron angle plates Width: 1000 mm Ledpfjzmw Rwex Amtjrp Height: 2075 mm Depth: 700 mm Unit weight: 1 T

Condition: used, Pair of cast iron angle plates Lrodpezmw Nasfx Amtep Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, Pair of cast iron angle plates Height: 3000 mm Lrodpfxszmw I Ns Amtsp Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Lsdozmw Iijpfx Amtorp Weight: approx 2 T 3 same plates available.

Condition: good (used), Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Lodpozmw H Esfx Amterp Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.

Condition: good (used), Cast iron marble plate Length: 3500 mm Lredpfszmw Hrex Amtsp Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Year of construction: 2023, operating hours: 4,639 h, machine/vehicle number: 2014239, fuel type: diesel, motor manufacturer: NEF67TM4, General information Field of application: Construction Weights Empty weight: 1.980 kg Functional Generator capacity: 190 kVA Dimensions of cargo space: 335 x 116 x 193 cm CE mark: yes Other information Fuel consumption: 27,9 Liter/Hour at 75% Load Generator: TAL044L Lsdpfx Amezlwkbstjrp Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 400 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank