Used Used Bottling Line Sidel For Still Water Up To 12000 Bph for sale (70,996)

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: -washing machine Manufacturer: Kitzinger Year of manufacture: 2011 Output 1500 - 3000 bottles/h -bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 -swing top sealer Manufacturer: Rico -labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 -laser printer for dating Manufacturer: Domino -bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Bedpfxsxbnyle Ablelk Features: Kitzinger bottle washing machine capacity 1500-3000 bottles/h; Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine Domino laser printer for dating; bottle collection table

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Bjdpfevu Tt Iox Ablslk Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 2005, Capacity of the bottle filler: 10000 PET bottles/h with 485 ml Flaschen Features: Open input vessel, closed vessel with set-up-caroussel, format parts for 500 g and 285 g PET bottles Blsdpfjvcqq Hsx Ablok

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Bsdpfx Aovu Tthsbljlk Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Blodpfjyxd D Rox Ablsk Vessel working temperature: -25/+120 ºC Half-coil/jacket working pressure: -1/+6 bar Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Equipment configuration: -Agitator -Half-coil Specifications: Internal pressure: 87 PSI Material of Construction: glass lined

Condition: used, Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Bljdpfx Aovguukoblsk Isobaric valve: No PLC type: Not Existing Spare parts available: No   Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4) APE carton former with Nordson gluer 5) APE case packer 6) taping machine

Condition: used, Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Bsdpfx Asvguphoblslk Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL Bordeaux. To sanitize the used line, they use disposable steam which still allows the taps \ central part to be washed well. Used wine filling line services: For this Complete Bottling Line used for the wine we can offer disassembly and packaging services, and reassembly in case of need. Furthermore, we can propose a new project for adding bottle format equipment in case of a new bottle shape. A maintenance service can be negotiated for this Complete Bottling Line and implemented in about 75 working days from the confirmation of the order. All replaced parts are warranted except Filters, fuses, lubricants and consumables in general; they are subject to ordinary or scheduled maintenance. The electrical components can be damaged by accidental electric shocks to the control panel and by the interruption of the general control. Damage due to the use of non-original parts. Used Complete Bottling Line for wine subject to prior sale.  

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Bsdpfovguwljx Ablslk Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.  

Condition: used, operating hours: 52,428 h, Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. Using isobaric technology, the line effectively preserves effervescence throughout filling, which, in turn, maintains product integrity and enhances taste quality. Blow Molding Machine – SMI EBS 2016 The SMI EBS blow molding machine, model EBS from 2016, forms PET containers directly on-site. Specifically, it transforms preforms into bottles, ensuring consistent size and container strength. Therefore, this integrated blow molding machine increases efficiency by minimizing reliance on external bottle supplies and maintaining high-quality production standards for the CFT Bottling Line For sparkling beverages. Filling Monoblock – CFT Master EW 32/32/8 2012 The CFT Master EW 32/32/8 filling monoblock, a central component of the used bottling line for sparkling beverages up to 9000 bph, combines rinsing, filling, and capping in one compact unit. Notably, this system uses isobaric filling to keep internal container pressure stable, which is especially beneficial for carbonated beverages. In this way, the setup reduces waste and effectively protects the product’s quality. Labeling Machine – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 The P.E. Labellers labeling machine, model Universal M/S 15T/960/3S – 4E from 2009, applies labels to PET containers with precision. Label application helps with product identification, in addition to ensuring regulatory compliance. Furthermore, this model offers flexibility and accuracy, especially for containers of various shapes and sizes for the CFT Bottling Line For sparkling beverages Sleevering Machine – Nortan NORTAN 50 2008 Blodovgvbropfx Ablsk The Nortan NORTAN 50 sleevering machine from 2008 of the CFT Bottling Line For sparkling beverages adds protective sleeves to containers, enhancing aesthetics and protecting them from contamination. In addition, this process proves essential for beverages stored or transported over long periods. Thus, the used bottling line for sparkling beverages up to 9000 bph benefits from this feature by improving product durability on store shelves.

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Bedjwgw Dgspfx Ablslk Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Blsdowa Tqispfx Ablok Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line Bodpfx Aswahdqsblelk To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Bjdpfx Abev U Ni Sololk Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Bljdpfx Asvlgqhjblsk Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immediately for sale

Condition: used, operating hours: 40,000 h, Krones Contifeed Preform Feeder The Krones Contifeed preform feeder is designed for the precise and efficient feeding of PET preforms into the blow molding machine. It operates using a roller sorter system that gently handles preforms of various sizes, ensuring they are properly aligned before entering the blow molder. The Contifeed system offers quick and infinitely variable adjustments, allowing it to accommodate different preform types and sizes with minimal manual intervention. The system is available in three different lengths to match the output of the blow molding machine and includes options for automatic adjustment, making it highly flexible and adaptable to different production requirements. The design also includes features like automatic troubleshooting and easy access for maintenance, ensuring high operational efficiency​. Krones Preform Check Inspector The Krones Preform Check Inspector is a sophisticated, inline inspection system designed to ensure the quality and integrity of PET preforms before they enter the blow molding process. Recognizing that the quality of the final bottle is heavily dependent on the condition of the preform, this system plays a critical role in maintaining high production standards and reducing waste in bottling operations. The Preform Check Inspector utilizes advanced vision technology, incorporating high-resolution cameras and specialized lighting to conduct a comprehensive analysis of each preform. As preforms pass through the inspection station, they are subjected to multiple checks that assess various quality parameters. These include detecting surface defects such as scratches, dents, or contaminants, as well as identifying dimensional inaccuracies like ovality or variations in wall thickness. Bljdpfx Aovgvl Rsbljk One of the key features of the Preform Check Inspector is its ability to perform 360-degree inspections. This is achieved by rotating each preform in front of stationary cameras, allowing for a complete examination of the entire surface area. This comprehensive approach ensures that even minute defects, which could compromise the integrity of the final bottle, are reliably detected. The system is also equipped with specialized software algorithms that analyze the captured images in real-time. These algorithms are calibrated to distinguish between acceptable variations and actual defects, minimizing false rejects and ensuring that only preforms that truly fail to meet quality standards are removed from the production line. This precision contributes to optimal material utilization and cost efficiency. Integration with the overall production line is seamless, as the Preform Check Inspector can communicate with upstream and downstream equipment to synchronize operations. In the event of detecting a defective preform, the system can trigger reject mechanisms to remove the faulty item without interrupting the flow of production. Additionally, the system’s data logging capabilities allow for tracking defect rates and identifying patterns, which can be invaluable for quality control and process improvement initiatives.

Year of construction: 2018, condition: used, functionality: limited functionality, ABM PRESTIGE Line (2× PRESTIGE + 1× LOAD-5) Subject of Sale: Used circular saw sharpening line Model: 2 × PRESTIGE (HSS/CERMET grinders) + 1 × LOAD-5 (5-station automatic loader) Condition: Used, in good technical and visual condition Location: Poland / Katowice Availability: Immediate • High level of automation, minimal operator involvement • HSS & CERMET grinding in a single cycle • High precision and repeatability • 5-station magazine (LOAD-5) • Fast and efficient production • Wide functionality (face/top/side grinding, chipbreaker, automatic measuring) • Price: below (as a set, i.e. two stationary machines and 5-station automatic loader) • Transport & disassembly: by the buyer • Warranty: none • Training: optional (paid) Bljdpfxey Ed Sno Ablok • Year of manufacture: 2018 + 2021 (Both Prestige machines can also operate independently as standalone stationary machines) • New line price: 321,000 EUR

Condition: used, Year of construction: 2007, Glass bottle filling line for 6.000 bph, for 0,5 lt bottles, still installed, free, with following machines: - Bottle unpacking machine, make Matec, type: VARIPACK 400, built 2007 - Bottle cleaning machine, make GM Gera, type: GEK2.1 RV1-164/85-15m built 2007 - Bottle filling and sealing machine, type: VARIFILL 24/KK8, built 2007 - Crown cork closure conveyor system, built 2007 - Level and label control system, type: basic 2, built 2007 - Bottle packing machine, type: VARIPACK 400, built 2007 - Box washing machine, make GM Gera, type: KWM S111 1500/508, built 2007 - Bottle transport and box transport built 2007 - Sedimentation tank, built 2007 Bljdpfx Abeyrpxrjlok - Teaching bottle inspection, make Nate, type: EXAN 08, built 2012 - Labelling machine KUBE K30, built 2016

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Bljdpfx Abew Ahg Relek Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Bljdpfxsx H Tgds Ablek Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Condition: ready for operation (used), functionality: fully functional, Complete line for filling and packaging wine bottles. Bledpfsyn I Tmox Ablsk For a full description, see the attached PDF file.

Condition: used, Year of construction: 2005, machine/vehicle number: M268, Used Filling Monoblock GALDI RG50 up to 3000 brick/h Technical Specifications of the Used Monoblock GALDI Bsdpfx Abovgvguelelk The Used Filling Monoblock GALDI RG50 up to 3000 bph offers high performance and reliability for producing fresh liquid products like milk, cream, and fruit juices. Consequently, it handles up to 3000 cartons per hour, making it ideal for medium-sized production plants that require fast and consistent output. Therefore, this machine stands out in terms of both speed and efficiency.Production Capacity and Carton SpecificationsGaldi developed the RG50 model to process up to 3000 cartons per hour. Moreover, the machine supports 0.25, 0.50, and 1-liter capacities, with cartons measuring 70 x 70 mm in B-style. Thus, these specifications ensure that Monoblock efficiently packages various formats while maintaining high operational efficiency. As a result, it offers versatility for different packaging needs.Power Supply and Energy ConsumptionThis Monoblock consumes 20 kW of power and operates at a voltage of 380V with a frequency of 50Hz. Furthermore, these energy requirements are standard for industrial machines of this class. Consequently, production facilities must ensure their electrical infrastructure can meet these demands to avoid any compatibility issues or operational disruptions. In addition, careful planning will help avoid unnecessary delays in production.Year of Manufacture and Operating ConditionsGaldi manufactured the Used Filling Monoblock GALDI RG50 up to 3000 bph in 2005. Although the machine has logged 22,506 hours of production, after receiving full servicing in 2019, it remains fully operational. Therefore, the machine is currently in storage and is available for sale in “as is” condition. Additionally, its recent maintenance ensures smooth operation, increasing its value.Dimensions and WeightThe machine measures 4.70 meters in length, 2.45 meters in width, and 2.85 meters in height, with a total weight of 2500 kg. Consequently, these compact dimensions allow for easy integration into existing production layouts. Hence, production teams must ensure there is sufficient space for installation and future maintenance access. Ultimately, proper planning of the workspace guarantees seamless installation.Compatible ProductsThe Used Filling Monoblock GALDI RG50 up to 3000 bph processes fresh liquid products like milk, cream, and juices. Its technology, therefore, maintains the quality of sensitive products, preserving their organoleptic properties throughout the bottling process. Therefore, operators must ensure the products meet the machine’s specifications to avoid any issues in quality or disruptions in production. Moreover, adhering to these requirements helps maintain a smooth operation.Conclusion of the Used Monoblock GALDIIn summary, the Used Filling Monoblock GALDI RG50 up to 3000 bph offers a reliable and versatile solution for plants bottling fresh liquid products. Its ability to handle multiple carton formats and its well-maintained condition make it a cost-effective choice for those looking for an efficient used machine. Additionally, with proper installation and configuration, the machine will optimize production and maximize bottling efficiency.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 200 mm, paper weight (min.): 36 g/m², paper weight (max.): 160 g/m², product width (max.): 520 mm, roll diameter: 1,370 mm, TECHNICAL DETAILS Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Continuously variable format setting: 4" - 25" Continuously adjustable cutting width: 5 mm to 80 mm Stack counter/stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Stack counter/stacker: Power supply: 35 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Folding station: Power supply: 50 A; 400 V, N, PE EQUIPMENT Electrical documentation Full flexibility for cutting and residual formats Blodpfxsyzpw Uo Abljk Format and length changes via operator panel Longitudinal cuts with knife holder possible Waste extraction possible (extractor not included in the system) Can stack up to two sheets simultaneously

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases Bodpfjymbfyex Ablslk - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Blodpfx Absvryhyslok Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Bljdpswv Trlefx Ablok Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.