Used Vötsch Temperature Test Chamber for sale (18,113)

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Iiodpfx Amjzf Ibksgsh Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Iiedpfozg Twaex Amgoh Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT3-340/40   Weiss Temperature Test Chamber with S!MCON / 32 Control System, Water-Cooled   (Refrigerant converted to R-452A)   Control Panel: "Touch Panel" All control and operating commands can be initiated by simply touching the function symbols on the "Touch Panel" control panel.   Adjustable Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine part, the test chamber is equipped with adjustable feet.   Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthroughs installed as standard R1: 125 mm diameter L1: 50 mm diameter   Test chamber volume: approx. 335 liters   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Temperature range: -42 to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Maximum heat compensation: 2300 W   Data for operation:   Test chamber lighting: Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW Fuse (to be provided by the customer): 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 56 dB(A)   Refrigerant: R-452A   Weight: 515 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   Iedpfxszgbkhs Amgeih We will be happy to answer any further questions you may have by telephone.

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 For sale is a used corrosion test system from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Technical data Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Depth: approx. 600 mm Iisdpfx Ajzg U Tiemgjh Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Weiss TS 130 Thermal Shock Chamber Manufacturer: Weiss Umwelttechnik GmbH Model: TS 130 Machine type: Thermal Shock Chamber Test chamber volume: approx. 130 liters For sale is a used Weiss TS 130 thermal shock chamber with a hot and cold chamber, a movable lift basket, SIMCON/32 touch control, and a separate air-cooled condenser/cooling unit. The system is suitable for temperature cycling and thermal shock testing, environmental simulation, material and component testing, electronics testing, quality assurance, as well as research and development. Technical data: Hot chamber: +60 °C to +220 °C Cold chamber: -10 °C to -80 °C Switching time hot/cold chamber: approx. 10 seconds Ijdpfx Ajzp D D Nemgoih Temperature stability: ±1 K Internal dimensions (W × D × H): approx. 500 × 600 × 450 mm Max. load lift basket: 20 kg Max. load per insert rack: 10 kg Refrigeration system: Air-cooled refrigeration cascade Separate condenser/cooling unit as shown in the pictures High-stage refrigerant: R404A / 2.2 kg Low-stage refrigerant: R23 / 1.2 kg Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standby pressure: 11 bar g Electrical data: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14.0 kW Rated current: 26.0 A Connection type: CEE 32 A Control / Equipment: SIMCON/32 touch control Hot and cold chamber Movable 130-liter lift basket Test chamber door with viewing window Separate air-cooled cooling unit Operating hour counter SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Dimensions / Transport data: External dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width incl. door hinge: approx. 1,850 mm Depth incl. removable door: approx. 1,155 mm Weight of test chamber: approx. 950 kg Separate cooling unit on pallet as shown in the pictures Freight / special transport possible Condition: Used - Year of manufacture 2008 Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Weiss TS 130 thermal shock chamber Separate condenser/cooling unit SIMCON/32 touch panel SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, RS Simulators Type: ST2K320/45 K Water-cooled shock testing system Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Humidity in the upper test chamber Climate temperature range: +40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25 % to 75 % relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Total power: 13 kVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Ijdozgbutspfx Amgeih 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, TIRA Type: Walk-in climate simulation chamber TTZ 4008 S(m) Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Iijdpfx Amjzg Twmsgjh Dimensions: Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, TIRA Type: Walk-in climate simulation chamber TCZ 4020 S-2k Technical data: Iiedpfjzg Tw Tsx Amgjh Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Weiss Type: Walk-in climate simulation chamber WK 50 / 40-120 Air-cooled Technical data of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5 °C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Iedpfezg Txqsx Amgsih Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, TIRA Type: Walk-in climate simulation chamber TCZ 4012 S(m) Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260 mm x 3850 mm x 2780 mm Test chamber (W x D x H): approx. 2254 mm x 2645 mm x 2251 mm Door opening (W x H): approx. 2251 mm x 2254 mm Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) Iiodpozg Tw Hjfx Amgoh We will be happy to answer any further questions you may have by phone.

Condition: new, Zwick / Roell Ijdpfjlguwwox Amgsih Type: EC76G 1-1-2 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range of -80°C to +250°C Reproducible test results and perfect integration of the temperature chamber into the testing system. Temperature chambers: Width 600 mm x Height 1000 mm Temperature chamber for the AllroundLine Cooling via LN2 (liquid nitrogen) (-80°C connection is external and not included) Voltage: 400/230 16A 3N〜50/60Hz Power: 4500W Weight: 180 kg Condition: unused Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Iisdey Sl Uqepfx Amgoh Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber for performing temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climatic test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The efficient air circulation with a correspondingly high air exchange rate guarantees good heat transfer to the test specimen. The air handling unit is located on the rear of the interior chamber. The components are located in a separate frame behind the device and are easily accessible. The control system is housed in a separate control cabinet. The operating panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air using a fan.   Technical Performance Data:   Temperature Tests: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate: linear, depending on the test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climatic Tests:   Temperature range: +10 °C to +90 °C Humidity range: 10 % to 95 % relative humidity in the dew point range: +5 °C to +89 °C Temperature deviation: ± 0.5 K over time Humidity deviation: ±1 to ±3 % RH over time   The technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class: IP 54   Technical Design:   Refrigeration unit: water-cooled, low noise, semi-hermetic, Isdpfx Amszizmnsgsih stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by appointment (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See image)   (Changes and errors in the technical data and specifications are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial emission test chamber / VOC test chamber / climate test chamber Water-cooled For sale is a professional emission test chamber: Weiss Technik EmissionEvent VOC/240 (year of manufacture 2018) from an industrial laboratory and testing facility. The device is used to perform emission tests in accordance with standards under precisely controlled temperature, climate and process conditions and is designed for continuous use in laboratories, industry and quality assurance. Iiodpsziyz Rjfx Amgsh What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emission) of materials under defined conditions. This involves examining which substances a material releases into the air. Typical applications: Emission testing of plastics, components, materials Automotive interior material tests (odor / pollutants) Building products & furniture emissions Packaging, textiles, adhesives, paints Quality control and standard tests (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity and air conditions. Emissions are passed from the test chamber via a carrier gas (e.g. nitrogen or air) and can then be measured with analysis devices. Device function / features: Stainless steel emission test chamber (hermetically sealed) Temperature and climate control Carrier gas system for emission measurements Automatic process control with touch panel Program operation / continuous operation possible Sampling connections for VOC analysis Industrial design (laboratory & continuous operation) Data for temperature tests: Temperature range +20 to +130 °C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.1 to ± 0.5 K Temperature change rate (according to IEC 60068-3-5) Heating 0.4 K/min Cooling 0.3 K/min Temperature change rate (on average, with increased heating and cooling capacity) Heating up to +65 °C 1.5 K/min Cooling from +65 °C to +20 °C 1.3 K/min Data for climate tests: Temperature range +20 to +130 °C Dew point range +5 to +60 °C Humidity range 5 to 95 % RH Temporal temperature deviation 0.1 to 0.3 K Temporal humidity deviation -3 to 3 % RH Dimensions EmissionEvent VOC/240 External dimensions (device) Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber) Emission test chamber: 200 l Test chamber gross: 240 l Test chamber net: 208 l Max. test specimen: 80 kg Internal dimension VOC/240 Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 12.1 kW Rated current: 30 A Protection class: IP54 Refrigerant R134a – 2.5 kg Weight: approx. 1080 kg For your security as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions for you by telephone.

Condition: used, BINDER   BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ extinguishing system   Device Description:   For sale is a BINDER KB 720 (E6) refrigerated incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus".   This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage units.   Particular Added Value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire / flames, no explosion).   What can the device do specifically? (Point 2 – Performance & Application)   Conducting aging tests on lithium-ion cells Performance tests (charge/discharge cycles under temperature) Temperature endurance tests and temperature cycling tests Tests of non-energized and cyclically energized cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions   Test environment for R&D, Automotive, E-Mobility, and energy storage technology   Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / E-Mobility / Energy storage   The P Plus package turns the KB 720 into a genuine battery safety test chamber: Iedpfoziznfex Amgoih   Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & acoustic alarm Mechanical double door lock (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inerting (e.g., nitrogen) Emergency stop / manual activation of the extinguishing system Feedthrough openings for charging and measuring cables   Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, without resulting in an explosion or uncontrolled spread.   Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and fault scenarios.   Technical Core Data:   Temperature range: – 10 °C to +100 °C   Interior volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. total load: 100 kg   Electrical Data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A   Refrigerant: R134a   Protection class: IP 20   Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm   In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale attractiveness   Weight: approx. 285–300 kg   Documents & Downloads   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data, specifications are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. Ijdpszizmbefx Amgeih The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Thermotron Isdpfx Aezd R T Hsmgsih Type: Thermotron SE-1000-6-6 Thermotron temperature chamber Water-cooled Interface is not functioning! Thermotron temperature chamber SE-1000-6-6 Internal dimensions: W x D x H 1000 x 1000 x 980 mm Working area volume: approx. 980 liters Temperature range: -70°C to 180°C Total heating rate: approx. 4.1 K Total cooling rate: approx. 1.2 K Heating rate in °C/minute -65° to 71°C: 6.8°C Heating rate in °C/minute -65° to 180°C: 5.6°C Heating rate in °C/minute -40°C to 85°C: 6.5°C Cooling rate in °C/minute 85° to -40°C: 4.7°C Cooling rate in °C/minute 71° to -65°C: 3.7°C Cooling rate in °C/minute 180° to -65°C: 4.3°C External dimensions - W x D x H: 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE 35 A Refrigerant: R508B and R404A Approx. weight: 900 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Iiodpoz Rwk Rsfx Amgsh Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Köhler Type: HK 500 Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation thanks to a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient temperature +5 – 60°C Humidification temperature: Ambient temperature +5 – 75°C Power connection: 230V, 1 phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Salt solution reservoir: 140 liters Material: Stainless steel Iodpfxozd Umks Amgjih (Completely overhauled and converted by the manufacturer to a Comfort control system) - Renewal of all electrical components - Renewal of all hose connections 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! Isdpfx Aozd Ultomgeih The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, RS Simulators Type: KS 300 / 75 Water-cooled climate test chamber Ijdpfx Aezd R Ausmgoih 300 liters Internal dimensions: Width 670 mm, Depth 670 mm, Height 670 mm Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Weight: 630 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, VLM Type: V.745.672.120, Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door opening dimensions (W x H): 1300 x 680 mm Housing external dimensions (W x D x H): 2162 x 995 x 2080 mm Operating temperature range: 5°C > ambient temperature to +80°C Heavy-duty design for a load capacity of up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 memory locations for test procedures, 50 memory locations for test segments, ramps: Humidity and temperature control across the entire working range, Ethernet connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, tap connection 3/4" external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Ijdozg Tl Rjpfx Amgsih Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end AD 75 mm Operating modes: Salt spray Condensation water (CWC) Ventilation with ambient air Warm air Controlled humidity

Condition: used, RS Simulators Ijdoy H Ib Aepfx Amgoih Type: KSS 600/75-10K RS Simulators climate chamber / environmental simulation chamber Prüf- und Messtechnik GmbH Model: KSS 600/75-10K water-cooled For sale is a professional climate test chamber / environmental simulation chamber for temperature tests, climate tests, material tests, aging tests, as well as industrial testing and measurement applications. The unit is in used condition and can be fully inspected according to the images. The control panel / display is present and shown in the images. Technical data Type: KSS 600/75-10K 600 liters Temperature range: -75 °C to +180 °C Temperature change rate: Cooling: 10 K/min Heating: 10 K/min Test chamber dimensions (W x D x H): 840 × 840 × 840 mm External dimensions (W x D x H): 1200 × 1600 × 1995 mm Voltage: 3 x 400 V / N / PE Current consumption: 55 A Weight: approx. 1400 kg Refrigerant according to nameplate: R404A – 6.0 kg R23 – 3.0 kg Equipment / Features RS Simulators control panel / operating panel Programmable operation possible Observation window in the door Test chamber with temperature monitoring Operating hour counter Side access / connection possibility Robust industrial design Heavy-duty design with an approximate weight of 1400 kg Scope of supply RS Simulators climate chamber KSS 600/75-10K Scope of supply as shown in the images Condition & Notes Condition: used Inspection possible by arrangement. Loading can be arranged. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber, air-cooled version with observation window, test item protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected as shown in the pictures. The current display shows manual operation / stop, temperature actual value 16.59 °C, setpoint 5.00 °C, humidity actual value 39.7 % RH, and water supply actual value 11.0 l. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Iijdpfx Amsy H Hl Hegeh Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test item protection / temperature limiter Water connection / deionized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface as per documentation Digital outputs for test item control Test chamber dimensions as per documentation: approx. 850 x 850 x 830 mm External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures The unit can be inspected by appointment. Loading with a forklift can be arranged. For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, RS Simulators RS Simulators ST2K 1000 / 55 Temperature Shock Chamber Water-cooled The unit was regularly serviced and maintained by the manufacturer until it was decommissioned. For sale is a high-performance temperature shock test chamber, type ST2K 1000 / 55. The unit is ideal for standard-compliant thermal shock tests in accordance with DIN EN 60068-3-5, as well as for demanding material and component tests. With its two separate temperature chambers and automatic horizontal test basket transfer, this unit offers the perfect solution for reliability tests in industry, automotive, research and quality assurance. Key technical data: Temperature ranges Upper test chamber (hot chamber): +40 °C to +180 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Lower test chamber (cold chamber): –70 °C to +100 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Test basket transfer: Horizontal movement (automated) Fast changeover for temperature shock tests Test chamber / usable volume (Type ST2K 1000) Volume: approx. 580 liters Internal dimensions: Width approx. 1070 mm, Height approx. 680 mm, Depth approx. 800 mm Max. load: approx. 150 kg Power supply: Total power: max. 33 kVA Current consumption: max. 65 A Mains connection: 3 × 400 V / N / PE / 50 Hz Main power cable: 5 × 25 mm² Water & compressed air connections Cooling water inlet: G 1", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized, max. 22 °C Condensate drains: multiple (non-pressurized) Compressed air connection: quick-release coupling NW 7.2 (G 1/4"), min. 4 bar, max. 10.5 bar Dimensions & Weight: External dimensions: Width: approx. 2800 mm Height: approx. 2400 mm Depth: approx. 2200 mm Weight: approx. 2800 kg Equipment Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm width) Full-fledged changeover cabinet Observation window Internal lighting SE-604 control unit Program operation and data recording possible RS232 interface Other technical data Sound level: approx. 67 dB(A) at 1 m distance (free field) Iiodoy H Igfepfx Amgjh Refrigerant: R449A: approx. 8.0 kg (GWP 1397) R23: approx. 2.5 kg (GWP 14800) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25 %–75 % RH Operating hours approx. 4,500 hours For your security as a buyer, please note the following information! The following points will be carried out on our offered units in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (see pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.