Used Venjakob Ven Comfortline for sale (1,658)

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Ncjdpju Uth Hsfx Akuet

Condition: good (used), Features: • Accurate, Rapid, Easy to Use • No Cell Alignment or Calibration • Temperature Control, 5 - 75° C • Customizable Reports, SP Charts, Two-Parameter Plots, Graphical Overlays • Integrated Computer The Brookhaven ZetaPlus is designed for rapid, accurate and, above all, straightforward determination of zeta potential and electrophoretic mobility of fine particles from around 5nm up to about 50µm. Its principle is the measurement of the Doppler shifted frequency spectrum of scattered laser light using a known reference frequency for maximum accuracy. The key attraction of the ZetaPlus is its simplicity of operation due to the innovative design of its sample cell – electrode assembly. Using low cost, disposable cuvettes and simple "plug-in" electrodes, it completely eliminates the problem of electroosmosis – for all samples. With this system, cell alignment with respect to the laser beam is no longer critical and therefore requires no periodic checking or adjustment. Bubble-free filling of the cell is easy and fast and the volume of sample required is minimal. Sample temperature is accurately controlled by a fast response dual-Peltier system operating in the range 50C to 750C. For most common liquid media, necessary physical constants are all pre-programmed throughout the temperature range. pH can be read directly into the ZetaPlus software. Zeta potentials can be automatically plotted against pH or any other variable of the user’s choice, such as surfactant or additive concentration. Ncodpfsupafvsx Akujt

Year of construction: 2015, condition: new, FP1251 N4S RD90 Centrifugal Fan Purchased as a replacement fan, never used. Nodpspr U Hbefx Akuect Manufacturer: F.lli Ferrari Ventilatori Industriali S. p. A. Direct drive power 200 kW maximum speed: 1700 1/min dynamic pressure: 7300 Pa flow rate max. 23,3 m3/s maximum medium temperature 180 degrees C

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm Nodpfxoxy Nt Ro Akuoct 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks

Condition: new, functionality: fully functional, Conveyor Belt EP 650/3 – 800 mm – 6+3 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following technical specifications: Width: 800 mm Type: EP 650/3 Polyester/Polyamide fabric plies Tensile strength: 650 N/mm Construction: 3 fabric plies Cover plates: 6 mm top / 3 mm bottom Rubber quality: 15 MPa (standard industrial grade, wear-resistant) Material: PE/PA Condition: New / unused Length: 196 m Applications Ideal for use in: Quarries & gravel plants Recycling facilities Agriculture General industry and conveying technology Njdjxy Nr Topfx Akuect Advantages High tear resistance Durable covers Good abrasion resistance Suitable for medium to heavy-duty conveying tasks

Condition: new, Year of construction: 2022, cooling capacity: 106.2 kW (144.39 HP), overall weight: 1,780 kg, warranty duration: 6 months, total height: 2,410 mm, total length: 6,100 mm, total width: 2,250 mm, Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Ncodpfx Akox Eh S Ajuot Working hours: 0/0/0/0 h. Condition: Outlet, New

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 400 mm, area performance: 1,200 m²/h, overall weight: 22 kg, warranty duration: 12 months, tank capacity: 4 l, water tank capacity: 4 l, I am offering the innovative Aventurier Artist 1 SE cleaning device, which combines effective scrubbing and debris collection in a single pass. This is a professional machine designed for daily cleanliness maintenance where precision, convenience, and operational efficiency are essential—ideal for schools, offices, clinics, hotels, restaurants, and small commercial spaces. Key features: • Rotating cleaning head – enables easy maneuvering and access to hard-to-reach areas: corners, edges, under furniture. • Compact size and ergonomic design – adjustable tilt angle allows adaptation to the operator's height, ensuring comfort even during prolonged use. • Intuitive operation – the touch control panel allows quick and easy adjustment of the operating mode to the specific task and surface type. • Versatility – effectively removes dirt from all types of hard flooring, including porcelain tiles, concrete, stone, and vinyl panels. • Quiet operation – perfect for use during opening hours and in noise-sensitive environments. Technical specifications: Theoretical performance: 1000–1200 m2/h Working width: 40 cm Brush pressure: 15 kg Vacuum pressure: 8000 Pa Brush rotation speed: 350 rpm Average water consumption: 100–140 l/m2 Tank capacity: clean water – 4 l / dirty water – 4 l Operating time: Eco mode 150 min / Turbo mode 120 min Charging time: 100 min / per battery Noise level: 60 dB (Eco mode) / 68 dB (Turbo mode) Cleaning modes: Eco/Auto/Turbo/Sterilization/Deep clean Dimensions: 110.4 x 43.9 x 34.6 cm Gross weight: 22 kg Device characteristics: • Equipped with a HEPA filter for effective filtration and disinfection. • High-resolution LCD display + intelligent voice system • Easy removal of the dirty water tank enables convenient cleaning, preventing unpleasant odors • Clean water tank with dual inlets suitable for all types of faucets • Extended battery run time – up to 2.5 hours on a single charge! • Edge cleaning system • Antibacterial body Njdpfx Aswz Nr Ejkuoct Equipment included: Battery Disc brush Squeegee blade HEPA filter LED lighting Wi-Fi

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, cutting width (max.): 180 mm, overall weight: 1,000 kg, saw band length: 5,450 mm, saw band width: 40 mm, Band resaw with feed VENETA MACCHINE Papper Wheel diameter: 800 mm Cutting width: 16-180 mm Maximum cutting height with feed: 135 mm Maximum width of saw blade: 40 mm Hydraulic saw blade tensioning Material feed belt 2 upper feed rollers Feed speed Automatic positioning to preset dimension Quick selection of 4 saved programs Motor power: 5.5 kW Nedpfxsxywiao Akuoct CE certificate

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: Njdpfx Akjtp S E Eeujct – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: good (used), Year of construction: 1988, Description: Heavy-duty, high-precision horizontal lathe with Rohm hydraulic clamping system, slide with two working positions, Sauter 4-position tool turret, circular turning unit, CNC 6 axes, tailstock, chip conveyor. Suitable for both high-volume material removal and high-precision turning. Machine modified with a 2000 mm face clamping plate and increased in size. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers: 2200 mm Turning diameter over slide: 1400 mm Turning length: 6000 mm Three-jaw chuck table: 2000 mm Spindle bore: 200 mm Nodpfx Akjxmb Adeujct Attachment for circular turning Workpiece weight: 4,500–40,000 kg Turret head: 4 positions Spindle speed range: 4 – 400 rpm Main motor Siemens 95.5 kW Maximum torque: 40,000 Nm Overall power requirement: 125 kW Control: CNC SIEMENS 8T, 6 controlled axes Machine weight: 43,000 kg Required space: 13,000 x 4,000 mm

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0460013, We sell a Revent 4 doors proofer for 8 racks, model:PB06/1Xeb10, MFG 2009, excellent condition. The profer is dismantled properly and has a montage schema. Made in Sweden Voltage: 3 Ph 380-400 V + N+ PE 50 Hz; Total load 10,5-11,5 kW Heat capacity 10-11 kW Rated current 17-17,8 A Total weight dismantled with the stainless steel floor approx. 600 kg. Njdpfx Akowh Unxeusct Price Euro 3.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder Ncodpfouiq Dhex Akuet 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 01096472, cooling capacity: 3.76 kW (5.11 HP), type of cooling: water, operating temperature: 5 °C, Equipment: cooling unit, FOCS-W-1502 with 2X BITZER CSH7571-70CVY-40P along with 4X GRUNDFOS NBE.NKE circulators including controller with DECS cooling tower. The price is per piece, there are three available. Nsdpfx Akeul T U Aoujct

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-250-95-6951, functionality: fully functional, operating hours: 682 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, working width: 1,415 mm, spindle motor power: 10,000 W, working length: 3,100 mm, 2017 HOMAG Weeke Venture 115 CNC machining centre in excellent condition. Lightly used machine with very low spindle hours for age. Moved once since initial install. Machine is currently installed, calibrated, and available for inspection under power. - 10kw spindle - 18 position drill block with grooving saw - Multipurpose saw 118mm cut depth - 22 position tool change capacity Njdpfx Aoy S Dfbokusct - Pod & Rail Table with LED positioning indicator This is a clean, well-kept machine from a low-use environment, not a hard-worked production machine. Important point on specification: the machine is 5-axis capable, but the additional 5-axis software licence is not included in the sale. This can be added via Homag at additional cost if required. Buyer responsible for decommissioning, loading, transport and insurance. Machine available for demonstration in situ by appointment.

Condition: new, Year of construction: 2026, temperature: 230 °C, inner dimension length: 3,800 mm, inner dimension width: 1,600 mm, inner dimension height: 2,270 mm, total length: 4,560 mm, total width: 2,080 mm, total height: 3,270 mm, control type: PLC-controlled, Equipment: CE marking, Internal dimensions LxWxH: 3800 x 1600 x 2270 mm External dimensions LxWxH: 4560 x 2080 x 3270 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 160 kW (2 burners in total) Maximum working temperature: 230 o C; Heat resistant recirculating fans: 2 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on both sided (tunnel) Ready for 5 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners POWDER COATING OVEN FLOWSYNC Ncedsy Ud H Rjpfx Akust Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality WE ARE LOOKING FOR SALES PARTNERS

Condition: used, functionality: fully functional, machine/vehicle number: H2X352K00878, Year of construction: 1999, operating hours: 7,618 h, load capacity: 4,000 kg, lifting height: 3,270 mm, fuel type: diesel, construction height: 2,400 mm, empty load weight: 6,150 kg, drive type: Diesel, Diesel forklift Chassis number: H2X352K00878 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Description: A Linde H 40 D diesel forklift is for sale. The forklift is ready for use and fully functional. Both the visual and technical condition are good. The attachment is a rotating device with clamps and forks, but this can of course be exchanged for a standard attachment with fork tines of the desired length. The unit is available immediately. Fast and uncomplicated transport is possible upon agreement. Errors and prior sale excepted. Sale is made with the exclusion of any warranty or guarantee. Rotating device, clamp fork, Rotating device with clamp and forks, opening width: 2100 mm, clamp jaw width: 830 mm, clamp jaw height: 570 mm Ncedpfxey T Szgs Akuet 3rd valve, 4th valve.

Condition: used, Dematic conveyor system Roller conveyors can be individually planned RA1287 We plan your individual conveyor system from used goods! The Dematic roller conveyors are in good (used) condition. The roller conveyors are available in different versions, e.g. as: Gravity conveyors - Roller conveyors without drive Roller conveyors - roller conveyors and roller curves with drive Accumulation conveyors with RSPN without RSPN (pneumatic space brakes) Available conveyor lengths (FL): 3000 mm, 2000 mm, 1500 mm, 1000 mm Available nominal/outer width (NB): 600 mm, 500 mm, 400 mm Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Ncodpfxok Aa R Ij Akuet Roller width (RB): 540 mm 440 mm 340 mm Roller pitch: 62.5-125 mm variable (for roller curves the smallest pitch is 56 mm) Drive types: Head and center drive Load weight: up to 30 kg Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2007, RA1288 Gebhardt Roller Conveyor System individually plannable. Price on request! We plan your individual conveyor system with tested, used Gebhardt conveyor technology, according to your wishes! Large quantities and different designs available! The Gebhardt conveyor systems are in a very good (used) condition. The roller conveyors are available in different versions, e.g. as: gravity roller conveyors and curves - roller conveyors and curves without drive roller conveyors and roller curve conveyors - roller conveyors and curves with drive Accumulation roller conveyor (without accumulation pressure) - for separating the conveyed material Inclined inlets and pusher - for infeed or outfeed Stroke converter (toothed belt pusher) - for inward or outward transfer Nodpfx Ask Aa Sljkujct Roller switches - for sorting the conveyed material Available conveyor lengths (FL): e.g. 3000 mm, 2000 mm, 1500 mm, 1000 mm (individually customizable) Available nominal/outer width (NB): 610 mm, 510 mm Available roll widths: 550 mm, 450 mm roller pitch: 100 mm, 75 mm The following accessories are optionally available e.g..: Motors with and without frequency converter of the brand SEW Eurodrive / Movimot Supports variably adjustable side guides Light barriers /-switch Price: on request plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed Nedpfx Aoyycwrjkuect - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 Njdpsyycwlefx Akusct DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC Njdoxb Eg Njpfx Akuoct workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors. Ncedpfx Akoy S R Ezeuet

Condition: used, Year of construction: 2022, operating hours: 98 h, machine/vehicle number: GS30D-45512, Drive: Wheel Empty weight: 1.503 kg Lifting capacity: 227 kg Working height: 780 cm Transport dimensions (LxWxH): 1.83x0.82x2.16 Please contact PFEIFER GROUP for more information Nodpetr N A Aofx Akuect

Condition: used, Year of construction: 2021, operating hours: 186 h, machine/vehicle number: GS30D-40357, Drive: Wheel Empty weight: 1.282 kg Lifting capacity: 227 kg Working height: 780 cm Transport dimensions (LxWxH): 1.82x0.82x2.16 Please contact PFEIFER GROUP for more information Ncjdpfxetr I Rcs Akuot

Condition: used, Year of construction: 2022, operating hours: 16 h, machine/vehicle number: GS30D-45510, Drive: Wheel Empty weight: 1.503 kg Lifting capacity: 227 kg Working height: 780 cm Ncsdotr Iw Aopfx Akuet Transport dimensions (LxWxH): 1.82x0.83x1.73 Please contact PFEIFER GROUP for more information