Used Virtek Laserqc Lps-1Ds for sale (210)

Condition: good (used), Servo motor, geared motor, electric motor -Manufacturer motor: Siemens type 1FK7042-5AF71-1SGO -Voltage: 267 V -Torque: 3.0 / 2.6 Nm -Speed: 9000/3000 rpm -Manufacturer gearbox: alpha type LP 090-M02-30 -111-001 -Translation: 1:30 Fodpfx Aehyutueccjgc -Shaft: Ø 22 x 35 mm -Construction: B14 -Dimensions: 345/95/H143 mm -Weight: 10.1 kg

Condition: used, cloth lapper, polishing wheel, grinding wheel Fgjdpfx Aceuuu I Ajcec -Manufacturer: Flex, grinding-polishing sleeves grain 600 -Order No.: 318.175 -Diameter: Ø 90 x 100 mm -Use: for satin finishing machine Flex LP 1503 VR -Number: 11x polishing sleeves available -Price: per piece, minimum order 3 pieces -Packaging dimensions: 160/150/H15 mm -Weight: 0.05 kg

Condition: good (used), Year of construction: 2017, flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: SK 2282A-100 LP/4 TF i= 10.15 -Speed: 144 rpm -Engine: Type SK 80 L/4 -Power: 2.20 kW Fgsdpfst Hy Tbsx Accjc -Hollow shaft: Ø 35 x 140 mm -Protection class: IP55 -Dimensions: 450/270/H330 mm -Weight: 53 kg

Condition: good (used), Servo motor, geared motor, electric motor Fodpfehyuucox Accogc -Motor manufacturer: Siemens Type 1FK7042-5AF71-1SGO -Voltage: 267 V -Torque: 3.0 / 2.6 Nm -Speed: 9000/3000 rpm -Manufacturer of gearbox: alpha type LP 090-M01-10 -111-00 -Translation:: 1:10 -Shaft: Ø 22 x 35 mm -Design: B14 -Dimensions: 320/95/H143 mm -Weight: 9.2 kg

Condition: used, CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board Fodpfx Ajnah A Hjccogc -Manufacturer: KUKA LP electronics, control plug-in cards printed circuit boards -Type: ESC-CI V1.40 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Condition: used, machine/vehicle number: 16809, Year of construction: 2004, operating hours: 7,325 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,570 mm, load center: 500 mm, construction height: 2,230 mm, fork length: 1,200 mm, front tire size: 23x9-10 Sit 70%, rear tire size: 23x9-10 Sit80%, overall weight: 3,650 kg, enginetype: LP Gas, manufacturer: Linde Fodpfxjydgf To Accegc

Condition: used, machine/vehicle number: 16470, Year of construction: 2017, operating hours: 9,647 h, load capacity: 1,800 kg, lifting height: 4,600 mm, free lift: 1,460 mm, load center: 500 mm, construction height: 2,100 mm, fork length: 1,800 mm, front tire size: 2 x 200/50-10 - 100%, rear tire size: 2 x 18x7-8 100%, overall weight: 3,265 kg, enginetype: LP Gas, manufacturer: Linde Fgedpfexbkcpjx Accsc

Condition: excellent (used), Year of construction: 2022, MAUTING smokehouses for 2 smoke trolleys. Type - UKM 2002.E-LP / UKM 2002.E-L. UKM 2002.E-LP. Year - 2022/4. Price - 320,000 DKK / €43,000. UKM 2002.E-L. Year - 2016. Power kW - 67.5 kW. Current A - 101. Price - 235,000 DKK / €31,500. Sold EX Works. Fjdpstmf Ayjfx Accsgc Has used liquid smoke. TJ.

Condition: good (used), Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg Fgedpewya Egsfx Accec

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) Fsdpfx Aoxmhdnoccegc - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, MAJA SAH 250 L industrial flake ice machine (“Scherbeneiserzeuger”), year 2021, in very good condition. Produces high-quality hygienic flake ice suitable for meat, fish, dough cooling, bakeries, plant-based production, and food-tech applications. This SAH 250 L unit has been lightly used in a clean, controlled environment and is fully functional. Technical specifications: Model: SAH 250 L Serial No.: I-51121 Year: 2021 Voltage: 1AC / 230 V / 50 Hz / PE Current: 7.74 A Power: 1.26 kW Refrigerant: R449A – 1.6 kg Pressure max: LP 16 bar / HP 22 bar GWP: 1397 Fgodpfx Aex Afiaoccjc CO₂ Equivalent: 2.2 Type: Industrial flake ice generator (Scherbeneiserzeuger) Typical capacity for SAH-250 models is approx. 250 kg flake ice per day (depends on water/ambient temperature). Condition • Machine in very good working order • Stainless steel body in great shape • No corrosion • No mechanical defects • Quiet operation • Clean internal ice drum • Immediately ready for use Machine located in Best, Netherlands.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, Fgodpfx Acsv T I Evscjc We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Here we offer a laser marker. Product features: Class 4 CO2 laser Micro-marking Fedpfx Aceffmxnocegc Wavelength: 10.6 microm 0.417 mil Laser power continuous wave: approx. 30 W Weight marking head: 20kg Weight control unit: 12kg Marking field size with process area cover : 0-55 mm or 0 - 2.2 inch Permitted ambient temperature: 0 - 40 degrees Celsius Permissible humidity : 35% - 85% 100 V AC: 1,000 VA or less 200 V AC: 1,200 VA or less Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji,symbols,up to 50 self entered characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix and Bar Codes Type: LP-431U-C condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Here we offer a laser marker. Product features: Class 4 CO2 laser Micro-marking Fgedoffttrspfx Accoc Wavelength: 10.6 microm 0.417 mil Laser power continuous wave: approx. 30 W Speed: 240 m/min or less Weight marking head: 20kg Weight control unit: 12kg Marking field size with process area cover : 0-55 mm or 0 - 2.2 inch Permitted ambient temperature: 0 - 40 degrees Celsius Permissible humidity : 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji,symbols,up to 50 self entered characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix and Bar Codes Type: LP-431-C condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: Fgsdpfewycatsx Accsc - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Schunk Here we offer you a utility separator. Technical data: Outer dimensions: Width: 1325 mm Width control column 565 mm Depth: 1300 mm Shuttle overhang 730 mm Height: 1870 mm Overhang light column top 350 mm Operator height 900 mm Speed: X,Y: linear motor axes 2000 mm/s Z: linear motor axes 1000 mm/s Weight approx. 1500 Kg. Accuracy repeatability: 0,02 mm Fedpfoikauijx Accjgc Position accuracy: 0,02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working range Max cutting area X,Y 430 mm 350 mm Max effective size X,Y 430 mm 350 mm LP thickness 0.5 -3.2 mm Power supply 400V / 50 Hz / 16 A Condition: used / used Type: SAR-1300 B Scope of delivery: As shown (Changes and errors in technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: good (used), Year of construction: 2014, 2 pcs. KOCH glue gun, type: LP, year of manufacture: 2014 with Wagner high-pressure glue pump Fsdev Dvapspfx Accjgc Automatic glue application (counter-hole gluing) Machine no. A1410/8413 Three-phase current 220 V/ 50 Hz Connection value 0.2 kW Pump type 18-40 Series no. D14 3042 Max. material pressure 14.4 MPa Transmission ratio 18:1 Delivery rate DH 40 cc Max. air pressure 0.8 MP a Max. material temperature 80° Weight 100 kg (Subject to changes and errors in the technical data and subject to prior sale)

Operating hours: 100 h, condition: excellent (used), functionality: fully functional, KNAPP OSR Shuttle™ Evo Automated Shuttle System, designed for high-performance storage, order picking, and management of logistics flows. This modular system enables flexible, scalable, and energy-efficient operation for modern warehouses. Main technical specifications: Type: AS/RS (Automated Storage and Retrieval System) Capacity: up to 50 kg per tote Installation height: up to 30 m Throughput: up to 1,000 double cycles/hour Operation: 1D or 2D depending on configuration Included components (depending on configuration): OSR Shuttle™ shuttles High-density racking High-speed vertical lifts Order picking stations Connection accessories (conveyors, power supply, cabling, etc.) Environment: suitable for refrigerated zones (down to –28 °C) Applications: e-commerce, distribution, industry, pharmaceuticals, electronics, etc. Compatible with goods-to-person picking stations and automated conveyor systems Fgedpfx Acextawtocsc Quantity: 20 Price: 6,000 EUR (net) per shuttle

Condition: excellent (used), functionality: fully functional, Complete Industrial Ammonia Refrigeration System (R717) A complete refrigeration system based on ammonia (R717) refrigerant, designed for industrial applications in food processing plants, cold stores, freezing facilities, and high-performance process installations. The installation includes compressor units, pressure vessels, heat exchangers, circulation pumps, and control panels. Main system components: Ammonia separator vessel Manufacturer: Retech Refrigeration Technologies A/S Fjdpfx Aoydqpveccegc Type: PSH-0820 Number: 346601 Year of manufacture: 1994 Capacity: 1,092 l Design pressure: -1 / +22 bar Test pressure: 29 bar Refrigerant: R717 Equipment: 2 ammonia pumps Dimensions: 2,700 × 1,300 × 2,400 mm Condenser / Heat exchanger (Shell & Tube Condenser) Manufacturer: Sabroe Refrigeration Type: COSB 411904 Year of manufacture: 1994 Refrigerant: R717 Capacity: 134 / 61.9 l Dimensions: 2,500 × 800 × 2,300 mm Pressure vessel Manufacturer: Tortmans Capacity: 80 l Refrigerant: R717 Dimensions: 1,300 × 500 × 1,400 mm Intermediate cooler Manufacturer: Sabroe Refrigeration Type: DVEA 051411 Serial number: 92578 Year of manufacture: 1994 Max. working pressure: 26 bar Capacity: 340 / 10 l Refrigerant: R717 Dimensions: 1,000 × 800 × 2,300 mm Compressor unit (Sabroe skid): 2 × single-stage reciprocating compressor Sabroe Type: CMO 28 Serial numbers: 99008 / 99007 Year of manufacture: 1994 Capacity: 2 × 190 m³/h Pressure: 20 bar Refrigerant: R717 Sabroe separator Type: GHEA 0520 Serial number: 92419 Year of manufacture: 1994 Capacity: 600 l Alfa Laval heat exchangers: • M10-BWFDT – 37.2 l (year 1993) • M10-BWFGT – 67.4 l (year 1994) Overall skid dimensions: 3,700 × 2,500 × 2,050 mm Additional heat exchanger: Manufacturer: Alfa Laval Type: M10-BWFD Factory number: 30101-12952 Year of manufacture: 1995 Capacity: 104.0 l Design pressure: 25 bar Design temperature: 110°C Dimensions: 1,700 × 500 × 1,000 mm Grundfos circulation pumps (set): LP 80-125/124 – 50 m³/h (several units) LP 100-125/130 – 85 m³/h (2 units) LP 65-125/117 – 42 m³/h UPS 50-120 F – 3 × 400–415 V, 50 Hz Two-stage compressor: Manufacturer: Sabroe Refrigeration Type: TSMC 108 L Serial number: 99112 Year of manufacture: 1994 Refrigerant: R717 Capacity: LP – 276 m³/h Pressure: 18 bar Dimensions: 2,200 × 1,100 × 1,550 mm Control panels (3 units): 2 × panel with Siemens touchscreen – 1,200 × 500 × 2,200 mm Sabroe ammonia plant control cabinet – 2,000 × 500 × 2,300 mm Auxiliary cabinet – 800 × 300 × 800 mm

Condition: used, machine/vehicle number: 16746, Year of construction: 2015, operating hours: 5,820 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,750 mm, load center: 500 mm, construction height: 2,250 mm, fork length: 1,200 mm, front tire size: 205/27-10x12, rear tire size: 6.50-10, overall weight: 4,374 kg, enginetype: LP Gas, manufacturer: Jungheinrich Fjdox S S Dxepfx Accegc

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Holac Cubixx LP 120 Dicer / slicer including Holac GFA-5-4000 conveyor belt specialy made for hot products up to 90 degrees. Year of construction 2017 very little used and low running hours! Fedpfexwb Dcsx Accogc

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Pellet plant and bagging system - Inspection possible - Raw material bunker 4 cubic meters with discharge into a cutting mill, suitable for wood chips up to or smaller than G30 + conveyor belt - Cutting mill 22.5 kW with soundproof cabin - Material bunker 4 cubic meters with discharge conveyor belt, LP series - Pellet press LP22 (Integrated central lubrication, water pump, and temperature monitoring ensure a high level of user-friendliness) - Screening unit with conveyor for LP22 (incl. fill level sensor for big bag with pivoting holder and sensor cable for connection to pellet press LP22) - Big bag frame Vario 1.5m³ - Bagging system suitable for Vario BigBag system For further information, please do not hesitate to contact us. Fgsdsw Hrg Nepfx Accsc

Year of construction: 2020, condition: new, Exhibition machine with AD 2000 Year of construction 2020 Fgodpfx Aoxg Ux Ejccoc Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: excellent (used), Gas burner G3/1D Weishaupt 7x Existing Power 630Kw Year 1997 till 2004 Мы говорим по русски! Fgodpfx Aei Dh Icoccsc Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: excellent (used), Weishaupt gas burner G11/1D Version: ZMD Output: 4750Kw Year:2003 Viewing by telephone only! Fgsdpfx Acspiqy Ujcsc Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible