Used Volpak Horizontal Cartoner for sale (6,900)

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t Psdpfxofd Abao Ag Dspr dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) Pjdpofn Andjfx Ag Dopr • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides Ppsdpfsfgyifsx Ag Der “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min Pjdpfx Agefgyige Depr table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. Ppsdpfjd Iipzsx Ag Dor • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Ppjdpsfg E Hmefx Ag Dor Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting Ppsdpfxjfg E Hns Ag Der with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 310 mm Pedpod Iiprofx Ag Dspr capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. Ppodpfx Agsfg E Hpe Dsr • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Ppodpfed Iip Ajx Ag Der Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device Pjdjupw R Ajpfx Ag Dopr - Leveling elements

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t Ppodpfx Ajd Iiptjg Dor dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min Pjdpfed Iip Rox Ag Dspr total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: used, Year of construction: 1983, Schenck M480-1/450 High-Precision Dynamic Horizontal Balancing Machine with CAB 690 Control (1983) Psdpfx Aoy Dr Unsg Depr Speed Range 20-5,000rpm. Maximum Rotor Weight 450kg. Asset No.10_627. S/No. AHG 0459 (1983). Description With Interlocked Guards & 2 Roller Steady Supports.

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Podsyvutwepfx Ag Dspr Never installed Qty 2 available

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Ppedpfx Agjxqf U Sj Der Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: excellent (used), Year of construction: 1992, max. wheel diameter 130 mm gear width 400 mm max. module 3 min. module 0,5 Control Bosch CC 220 Ppjdpfoyb S R Aex Ag Djr milling spindle speeds (infinitely variable) 300 - 1200 U/min clamping length max. 1160 mm swivel angle for work spindle +/- 45 ° x-travel 230 mm y-travel 170 mm z-travel 400 mm spindle speeds 1 - 125 mm total power requirement 52 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,8 x 3,8 x 2,5 m Machine in very nice condition!

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min Pjdpfx Agowva Rno Depr stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 1,0 x 1,6 m

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm Psdpfjygx D Tsx Ag Djpr z-travel 670 mm Control MSX 501 spindle turning speed - stepless 14000 U/min tool taper BT 40 pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach table-size 500 x 500 mm total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m

Condition: excellent (used), grinding length 600 mm grinding width 300 mm workpiece height 350 mm magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 225 x 25 x 51 mm total power requirement 4 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,5x1,5x1,8 m Psdpfsyyqt Isx Ag Djpr

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t Ppjdpfjunt Iusx Ag Dsr dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. Pjdpfx Aget I Ec De Dspr - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Condition: ready for operation (used), Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment. Ppsdpfx Agjyzr H Ee Der

Condition: used, Year of construction: 1965, total length: 7,750 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 5.000 kg - Year: 1965 - Documentation available: No - CE certificate present: No - Serial number: 16628 Ppedsyy Ntmspfx Ag Der - Drive system: Conventional - Power [kW]: 13.7 - Centre height [mm]: 300 - Swing over bed [mm]: 600 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 6000 - Bed width [mm]: 400 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 22.4 - Max. spindle speed [rpm]: 1000 - Options: Fixed steady, Quick-change tool post, Removable bed, Travelling steady, Three-jaw chuck - Swing over removable bed [mm]: 900 - Transport dimensions: 7750mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1997, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: M9707, type of input current: three-phase, total width: 4,450 mm, total length: 1,950 mm, total height: 1,800 mm, heating capacity: 17.5 kW (23.79 HP), FECKEN KIRFEL K11 Horizontal Band Knife Splitting Machine (Germany, 1997) This is a high-quality German machine, ideal for manufacturers seeking proven industrial equipment from a reliable source. Suitable for: EVA foam sheets Rubber sheets Technical foam materials Footwear and industrial applications Machine Highlights: Manufacturer: Fecken-Kirfel Model: K11 Year: 1997 Type: Horizontal Band Knife Splitting Machine Ppodpoy E Ihtefx Ag Der Working Width: up to 1200 mm Condition: Excellent working condition Status: Installed, powered and in operation All maintenance has been carried out with original genuine spare parts from Fecken Kirfel only. The total weight of the machine is 3450 kg.