Used Weber Extrusion Line for sale (9,826)

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 Nsdpfx Akjuziyheyecr - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Nodpfxjxf Up Us Akyecr Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 2007, condition: repair required (used), trench roller Weber TRC 86, year 2007, 711 working hours, weight 1390 Kg, Lombardini Diesel 19,5 KW, ser.no.7000003, roller runs and shakes, brake on the right side does not release Ncjdpfxjiffk Tj Akyjr

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Ncodpfx Akew U A Dmsyor Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Ncjdpfx Akewh Nu Toyer Weber: 1x ZEL 360 conveyor 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. Ncodpfjxp D D Nsx Akyjr It had been idle for the last year due to a change in the packaging process. The decision was made to sell it. If you have any questions, I will be happy to answer them.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SK144, Weber blade head, unused, new! New price at Weber: approximately €18,000!!! Ncodowk H D Repfx Akyor Weber SK144 blade head, unused, new. New price at Weber: approximately €18,000!!!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Ncedpfx Ajuq Sb Sekyor

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Nsdpfx Ajif Rvajkyocr

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw Nedegm Tqwjpfx Akyscr brush with the power of 11 kw sweeping brush smooth regulation of feed speed weight of the machine: 2700 kg

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Ncodpfxoxazhto Akyer

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Nedpfx Akjyf A H Noyjcr Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Ncjdpjg Atrvofx Akysr

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Drilling And Press Machine with Industrial Robot X 1 Qty Nsdpfsw Upppsx Akyecr Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: refurbished (used), ROLLFORMING LINE Ncjdpfxog Rkv Eo Akysr

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: Ncedpoq Nxrxefx Akyer - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: good (used), functionality: fully functional, Weber Skinner Machine Function: Used in the food processing industry(especially meat and poultry) to remove skin, rind, or membranes from cuts of meat. Nedpfx Asxxuq Eokyscr Technical Data: Model: A-VI 520 working width: 520 mm (approx. 20.47 inches). Type of Machine: Derinder or Membrane Skinner Manufacturer: Weber Maschinenbau, a major manufacturer of food processing equipment.

Condition: good (used), functionality: fully functional, Program-controlled automatic grinding device for wet-ginding of sickle shaped Weber-knives (max. blade length 650 mm) angular adjustment of grinding disc 22°, 26°, 28° and 32° including cam disk for Weber sickle knives with a distance centre of rotor to cutting edge R400 mm (70311822) Technical Data: Model: SSG 400 Sharpening disc 50 x 25 x 20 mm Njdpfx Akoxxt T Ejyscr Grinding disc 100 x 40 x 50 mm Drive: Transmission-brake-motor Electric: 400 Volt, 50 Cycles, 0,25 kW, 16 A Dimensions: 1.100 x 510 x 1.770 mm (W x D x H) weight: 300 kg

Condition: like new (used), functionality: fully functional, The Weber Slicer 305 is positioned as a powerful, compact, entry-level solution to high-tech industrial slicing, designed for low-to-medium volume production with maximum flexibility and hygiene. Ncodsxxlhujpfx Akyjr Performance & Precision High Slicing Speed: Features a circular blade cutting system with a maximum cutting speed of 400 slices per minute (rpm). Wide Thickness Range: Offers great flexibility in product output with a cutting thickness ranging from 0.5 mm up to 50 mm. Versatile Slicing Presentations: Capable of producing a variety of presentations, including stacked, staggered stack, shingled, cross-shingled, endless shingled, and folded portions. Product Capacity: Can handle product lengths up to 800 mm with a slicing throat width of 250 mm and height options of 125 mm. Operational Benefits Ease of Operation: Described as easy to operate and "Plug & Play" (for the Basic model).Intuitive Control: Uses the Weber Power Control with a programmable touch screen color touch display for the Basic), ensuring rapid product changeovers. Superior Hygiene: Built with Weber Hygienic Design, which includes open designs and easy-to-clean components for simplified washdown. Quick Set-up Time: Allows for fast format and product changes via tool-less adjustable components. Ergonomic Blade Change: Includes a pivotable blade safety cover for safer and ergonomic blade changes. Manual Loading: Features manual loading, making it particularly suitable for small batches, frequent product changes, or special formats.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, working width: 22 mm, cutting force: 183 t, working length: 500 mm, TECHNICAL DETAILS Shearing force: 1,800 kN Flat material capacity: 500 x 22 mm Square profile capacity: 150 x 150 x 15 mm EQUIPMENT Counter Numbering system Ncjdpfeyyb Hrox Akyer

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 200 mm, paper weight (min.): 36 g/m², paper weight (max.): 160 g/m², product width (max.): 520 mm, roll diameter: 1,370 mm, TECHNICAL DETAILS Unwinder: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Maximum roll diameter: 1,370 mm Maximum roll weight: 800 kg Slitter: Maximum production speed: 250 m/min Maximum web width: 520 mm Minimum web width: 150 mm Paper thickness: 36 g/m² to 160 g/m² Cutting accuracy: +/- 0.2 mm Continuously variable format setting: 4" - 25" Continuously adjustable cutting width: 5 mm to 80 mm Stack counter/stacker: Minimum stack length: 100 mm Maximum stack length: 635 mm Minimum stack width: 115 mm Maximum stack width: 720 mm Minimum stack height: 100 sheets Ncjdpfx Akeyzpw Ueyjr Maximum stack height: 200 mm Maximum production speed: 250 m/min (depending on paper thickness) Paper thickness: 36 g/m² to 160 g/m² MACHINE DETAILS Unwinder: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Slitter: Power supply: 32 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Stack counter/stacker: Power supply: 35 A; 400 V, N, PE Compressed air: Min. 6 bar (dry) Folding station: Power supply: 50 A; 400 V, N, PE EQUIPMENT Electrical documentation Full flexibility for cutting and residual formats Format and length changes via operator panel Longitudinal cuts with knife holder possible Waste extraction possible (extractor not included in the system) Can stack up to two sheets simultaneously

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Nsdowuz Dgjpfx Akyecr Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Ncedpewu Aa Nsfx Akysr Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Ncodpjx A Tbwsfx Akysr Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Ncedpowuzzrsfx Akyor Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI