Used Weber Tts-1100 for sale (3,203)

Condition: good (used), Tool trolley, workshop trolley, transport trolley, table trolley, sliding trolley, material trolley -Material trolley: 2 pieces with swivel casters, used for EHT guillotine shear -Car1: 1100/1010/H530 mm weight 67 kg -Car 2: 1400/1050/H390 mm Weight 107 kg Dedpfx Adjyz R E Hs Njkl -Swivel casters: 4 each -Submission/Price: complete -Transport dimensions: 1400/1105/H700 mm -Weight: 174 kg

Condition: used, mileage: 14,215 km, power: 81 kW (110.13 HP), first registration: 05/1980, fuel type: diesel, overall weight: 6,500 kg, gearing type: mechanical, number of seats: 2, Year of construction: 1980, Equipment: all wheel drive, crane, Very well-maintained Unimog U1100 from first owner. Equipped with an Atlas AK 3006 A crane featuring 1x hydraulic extension, a maximum working height of 10 meters, and 5th & 6th hydraulic functions (e.g. for grab or bucket). The vehicle has only 14,215 km and 839 operating hours. Collector’s condition. Dkedpfx Asy Ac N Tjd Nol * Atlas AK 3006 A * 3,300 kg at 2.93 m * 1,620 kg at 4.77 m * 1,200 kg at 6.07 m * Optional: 3x mechanical extensions * 980 kg at 7.42 m * 730 kg at 8.73 m * 520 kg at 10.04 m * Working height: 10 m * Additional control circuit on crane (e.g. for rotator or grab) * 4-point outriggers * Remote control * Front hydraulics (e.g. for snow plow) * Selectable all-wheel drive with differential locks * 2x trailer hitches * Reversible gearbox with 8 forward + 4 reverse gears * Air-suspended driver’s seat * Engine: OM 352, 6-cylinder, 5,638 cm³, 81 kW * Registration as self-propelled work machine possible * Odometer: 14,215 km * Operating hours: 839 * Vehicle is from first owner Financing available through our partner banks, we are happy to assist you. Please note: Intermediate sale reserved, as this item is also advertised on other platforms. Accessories information without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend viewing and inspection to ensure buyers have a correct impression of the vehicle’s condition and suitability. Inspections and test drives are possible anytime by appointment and are expressly desired.

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW Dksdpfx Aoyr Tuded Nol

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A travel -x axis 180 mm travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. Dedpfxex I Shpo Ad Nskl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Condition: excellent (used), Year of construction: 2016, operating hours: 160 h, functionality: fully functional, nominal power (apparent): 1,100 kVA, We offer in good condition Atlas-Copco DTAS 1100 E - 110 kVA generator Year of construction: 2016 Working hours: 160 hours Fuel: Diesel Tankcapacity: 1000 liter Powered by MTU Motor. Dkodpsyy Dkasfx Ad Nel More details available on request, generator is directly available.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 25,585 h, spindle speed (max.): 7,000 rpm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details. Machine Benefits • main spindle was replaced 2023 • maintained internally • runs on emulsion • no fire extinguishing Qualitative Machine Benefits • Unimag interface for bar loading magazines • Parts conveyor belt • Spinner bar loading machine type servo. Make spinner, for spindles up to 42mm passage, for material d=4-42mm, length up to 3,200 mm • 10x external turning holder • 12x boring bar holders d=32 • 3x recessed boring bar holders • 6x straight agw • 3x axial agw • Material processed so far: aluminum, brass Dedpfsyail Usx Ad Nekl Technical Machine Benefits • Spindle 2 (counter spindle) in version up to 7,000 rpm - 42mm • Revolver 1 : 12-fold with cnc servo drive revolver 2 : 12-speed with cnc servo drive revolver 3 : 12-speed with cnc servo drive dmjgmx • Ejector unit integrated in counter spindle for ejecting parts into the parts catcher • Signal lamp on top of machine in three colors red/yellow/green as status display • Late conveyor as hinged belt conveyor exiting to the right, incl. Integrated coolant tank and return pump • Coolant system as additional tank incl. Submersible pump 80l/4bar, high-pressure pump up to 80bar / 19. 5l/min • Flushing gun in the work area • Holder for messtaster on the machine bed as preparation for the use of a • Messtaster for tool measurement switching in 3 axes. • Extraction d=200 to the working area for connection to extraction system

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 Dkodpfx Adjxta Nie Njl - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of manufacture: 2022 Only 3 operating hours Includes wheel set Self-collection only Continuous output (active power): 5.4 kW at 230V / 8.0 kW at 400V Socket configuration: 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1 x 400 V, 16 A Djdpfx Adju D Abwo Nskl - Sound-insulated diesel engine (compliant with noise and emission regulations) - Ergonomically positioned connections at the front in a control panel with voltmeter and hour meter - Full enclosure provides spray and impact protection - Electronic voltage regulation (AVR) - Thermal-magnetic circuit breaker protects against overload and short circuit due to faulty consumers or cables - Safe personnel protection via insulation monitoring (device does not require grounding) - Low-oil shutdown - Long operating times thanks to large 24 L fuel tank - High convenience with electric start - Water-cooled engine - Quality 'Made in Europe'

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge Djdpfx Adoqmc Ras Nokl low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: excellent (used), Year of construction: 2010, Tool-Temp Type: TT-180 Year of manufacture: 2010 Djdpfx Adjyzg Svj Njkl

Condition: excellent (used), Year of construction: 2015, Tool-Temp Type: TT-181 Year of manufacture: 2015 Connected load: 9.85 kW Weight: 55 kg Dksdpfsyzg E Njx Ad Nol

Condition: good (used), Year of construction: 2005, Tool-Temp TT-162 H, year of manufacture approx. 2005, oil Dodpsyzga Tofx Ad Njkl

Condition: excellent (used), Year of construction: 2014, Tool-Temp TT-180C Year of manufacture: 2014 Connected load: 9.85 kW Dsdpfxoyzf Uvs Ad Njkl Weight: 55 kg

Year of construction: 2026, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines Dedpfxoyxk D Do Ad Nekl We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal webs for maximum screening performance Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Short lead times and fair prices Contact us for your individual offer!

Condition: used, Year of construction: 2002, functionality: fully functional, grinding width: 1,100 mm, overall weight: 6,600 kg, type of input current: three-phase, The machine is in working condition. 2+2 level grinding is possible. Dkedpjyybgrjfx Ad Nsl

Condition: refurbished (used), Turbomolecular pump Various devices available! Dkodpfemdrayex Ad Nel Status: As good as new Manufacturer: Leybold Type: Turbovac 1100 C Cat.No.: 89480 Delivery time: ex stock

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t Dkodpfsvuuknox Ad Nel dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1961, grinding length 4000 mm grinding width 1100 mm workpiece height 1100 mm weight of the machine ca. 21 t Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert Dksdpfx Aovk Nllsd Nol -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden!!!

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute Dedpsywmqqofx Ad Nskl * Dim.: length 2000 mm - width 1100 mm, * Driving: two pieces vibration motors of each 1,2 kW

Condition: ready for operation (used), * Brand: Kleemann * Model: vibrating chute * Dim. vibrating chute: length 3600 mm - width 1100 mm. * Driving: 2 pieces vibration motors of each 4 kW. * Incl.: rubber springs. Dkjdpfxoywmg Ss Ad Nel

Condition: ready for operation (used), * Brand: Jöst Djdpfx Ajywl N Eed Nokl * Model: vibrating chute * Dim: length 2000 mm - width 1100 mm, * Driving: with two pieces vibration motors of each 2,2 kW, * incl.: Springs.

Condition: excellent (used), color: white, Year of construction: 2004, operating hours: 21,817 h, Drivetrain Dkodpjyhxbfofx Ad Nel Make of engine: Liebherr Functional Mast: lattice Mast length: 6.500 cm Lifting capacity: 100.000 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Additional information Please contact Christiaan Dekker for more information = Additional options and accessories = - Hook blocks = Remarks = Liebherr LR1100 Year: 2004 Hours: 21817 65 meter boom 23 meter Flyjib Hookblock & Jibball Hydraulic tilt cabin CE All manuals included Liebherr D936 engine

Year of construction: 2006, operating hours: 704 h, condition: used, Rental possible Dedpfxeyxkm Ej Ad Nskl = Further information = Contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 1992, Wide belt sander Dkodpfx Aoywi Rmjd Nsl Manufacturer: Bütfering Model: AWS 1100 Year of manufacture: 1992 Sanding width: 1,100 mm Max. workpiece thickness: 150 mm Abrasive belt dimensions: 1,900 x 1,100 mm Power: 15 kW Feed speed: 2.5–12.5 m/min, variable

Condition: used, Calibrator 1100, iron rollers and pad, used, tested. Worn conveyor belt. Dkodpfon A H Uxjx Ad Njl