Used Wedge Bar Chuck 165 Mm for sale (75,287)

Condition: good (used), Technical data for pallet rack beams: Racking system: META Thyssen Included in delivery: 01x pallet rack beam, used Color: yellow Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 3 HK (hooks) Clear width: 3,600 mm 02x safety pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Ppjdpfxjy Akh Rs Abyjt Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on place of delivery or scope of order.

Condition: used, Year of construction: 2022, functionality: fully functional, nuSLIT STRAIGHT PROCUT PRINT Year of manufacture: 2022 – factory reconditioned Manufacturer: Forstner Features: - Control system: Siemens SPS-F3 - Speed: 45 m/min - Standard entry shaft - Standard entry table Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitter knife pairs: 5 pairs - Slitter knife type: Stainless steel Cross cutting: - Sectional shear (PROCUT) – waste optimization through step cuts - Shear knife type: Stainless steel - Motorized sheet shear discharge Podpfxowbh S Rj Abyspt Incl. film unwinding device with fully rubber-coated feed rollers Labeling machine: - Automatic labeler Software: nuIT Connection

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Podpfeh Dv Uqjx Abyspt Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter Ppjdpfx Abjvy Txzoyjt - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger - Klinghammer SIA 180 beader - Angelus 50p seamer

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 490 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Air horn - Particulate filter - PTO (power take-off) - Radio / multimedia system - Sliding roof - Sleeper cab - Seat heating - Sun visor - Lane departure warning system - Stability control - Auxiliary heater - Warm-up automation = Remarks = Internal number for customer inquiries: 4-108 MAN TGS 33.520 6x4 BL chassis in cab colors black and white available from stock!!! Wheelbase 3,900 mm and 4,200 mm!!! IMMEDIATE AVAILABILITY FROM STOCK!! Ppodpfoylxq Rex Abyet * EURO 6E!! - Cab type TM: the comfortable (narrow, long, medium-high) - All-wheel drive 6x4 - Suspension type leaf/air (BL) - 3,900 mm main wheelbase, 1,400 mm distance between rear axles -> And in wheelbase 4,200 mm available from stock - MAN D2676 LF78 diesel engine, 520 hp output, 2,600 Nm torque, Euro 6e - MAN TipMatic 12.28 OD automatic transmission with retarder 35 - Eco retarder, speed-dependent, multi-stage, energy-efficient - High-performance engine brake MAN EVBec, multi-stage - Differential lock, rear driven axles - Trailer coupling on end cross member, RINGFEDER type 4040/G150B - MAN EasyControl operating panel with 4 functions, can be operated from outside with door open - Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating - Multifunction steering wheel, leather, height and tilt adjustable - Lower bunk with slatted frame and adjustable head section - Electrically operated front windshield sun blind, interior - Pull-out refrigerator and drawer - MAN SmartSelect infotainment controller with touchpad and direct access - MAN Media System Navigation Professional 12.3-inch - MAN Advanced sound system with subwoofer - Smartphone integration - and much more. Financing, hire purchase as well as leasing / partial amortization leasing are possible with our leasing partner. For further questions our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = General information Cabin: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,419 cc gross vehicle weight: 33,000 kg Axle configuration Brakes: Drum brakes Front axle: Tire size: 385/65-22.5; steered; suspension: leaf spring Rear axle 1: Tire size: 315/80-22.5; differential lock; suspension: air suspension Rear axle 2: Tire size: 315/80-22.5; differential lock; suspension: air suspension Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none

Year of construction: 2025, condition: new, RC1100G5 FREE SHIPPING TO EUROPE Product from Serbia 100%. 1. Platform diameter: 1100mm 2. Maximum height : 650mm (from platform to nozzles) 3. Maximum load : 350kg 4. Pumps : 2 pumps, each to 2,2kW 400L/min 3,7 bar. stainless steel AISI304 5. Special shape of laser-made nozzles (The best ratio of pressure and width of the jet) 5. Platform drive : Step SERVO MOTOR with with collision detection 6.Heaters : 2x(2x3kW) = 12kW stainless steel AISI304 7. Cover sensor: YES 8. Liquid sensors : YES 9. Platform overload detection : YES Podpfxogd Ucgs Abyopt 10. Oil skimmer : YES 11. Digital control unit with color screen, 3D notifications, time regulator (up to 80 min.) and temperature regulator (up to 80C) 12. Transport box : Safety wooden packing. WARRANTY 24 months ----- We also offer smaller machines from this series with a platform diameter of 700mm and 900 mm ----- 35 YEARS OF EXPERIENCE IN THE PRODUCTION OF AUTOSERVICE WASHING EQUIPMENT

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. Podpfomhhypex Abyept We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Ppjdpfx Abemhh Dheyet - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Ppedjmhh Dzepfx Abyot When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments Pjdomhhx Ijpfx Abyept - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Ppjdpfx Absmhhyajyst - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Pjdpfx Aoh Ek Daobyspt When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Podpfomhh Anex Abyopt - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Ppsdpfx Abjmhhf Soyst - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Ppsdpfx Abjmhhl Hoyst Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm Ppjdpfx Aemidyfobyet - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg Psdpfx Aemkixwjbyopt - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Ppsdpfjmhh Dtex Abyot We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2022, functionality: fully functional, sheet thickness steel (max.): 1 mm, Forstner nuSLIT PRO – Cross and longitudinal slitting line with automatic knife adjustment and guillotine shear Year of manufacture: 2022 – factory overhauled Manufacturer: Forstner Equipment: - Control: Siemens SPS-F3 - Speed: 45 m/min - Standard entry shaft - Standard feeding table Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs - Slitting knife type: Stainless steel Cross cutting: Ppedpfoyw Hxhox Abyet - Guillotine shear – cross cutting up to 1.5 mm steel possible - Knife type: Stainless steel The machine is being sold because the customer has purchased a new Forstner Coil Cell.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Psdpfxjywr Tkj Abyjpt Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Psdpjgd Uifjfx Abyspt Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: excellent (used), Bezel (28371) Center height 200mm diameter 65mm weight 9 kg more data, see picture Ppedpfxelrp Nqj Abyst

Condition: used, mileage: 253,000 km, power: 265 kW (360.30 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 14,230 kg, maximum load weight: 11,770 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, loading space length: 4,700 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, trailer coupling, Vehicle location: Bovenden, aluminum superstructure, with cab, suspension seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, sun visor, 16-speed switch, ABS (anti-lock braking system), raised exhaust, work lights, leaf suspension, trailer coupling with air, light, and hydraulic connections, lashing rails, rear-mounted crane, demountable, emergency stop, grab control, 2-point hydraulic outrigger, radio remote control, four hydraulic extensions, yellow environmental badge Wheelbase: 3200 mm Ppodpfov Inmpsx Abyst Body: Aluminum three-way tipper, aluminum drop sides, swinging and folding, with spring relief, Palfinger PK 16502 C, demountable, 12.4 m - 890 kg, remote control, crane 5100 operating hours. Load chart: max lifting capacity 5,580 kg, 4.30 m – 3,310 kg, 5.90 m – 2,270 kg, 7.90 m – 1,530 kg, 10.20 m – 1,220 kg, 12.40 m – 990 kg, oil cooler, grab available at an additional price of €2,500.00. The vehicle is also available without crane for €29,900.00! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Design: End beam Bracket: 4 HK (hooks) Clear width: 1,350 mm 02x Locking pins, used Finish: Fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating horizontal braces. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Ppedpfx Aboymlt Ioyet Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transportation or shipping of the item is subject to additional costs, which can be requested from us separately depending on the place of delivery and/or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, used Material color: RAL 1007 daffodil yellow Pjdpfxeymffqs Abyspt Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Connector: 4-hook (claw) Clear width: 1,350 mm 02x safety pins, used Version: fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating bracing in a horizontal direction Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipment of this item is subject to additional costs, which can be provided separately depending on the place of delivery and scope of delivery.