Used Windhager Hmx 210 for sale (3,118)

Condition: excellent (used), Year of construction: 2015, Model: KR 210 R2700 prime Serial number: 642212 Iaedpfx Anjyy Rwgswsu Year of manufacture: 2015 Payload: 210 kg Reach: 2696 mm Weight: 1111 kg

Condition: good (used), Year of construction: 2014, operating hours: 8,414 h, functionality: fully functional, machine/vehicle number: 668650, overall weight: 1,214 kg, load capacity: 210 kg, arm reach: 3,300 mm, This is a KUKA KR 210 R3300 K ultra industrial robot with KRC4 controller, year of manufacture 2014. We are also happy to offer you this robot fully refurbished! The robot is equipped with the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech Ijdjyw Iibopfx Anwoau

Condition: used, Year of construction: 2014, operating hours: 9,192 h, functionality: fully functional, machine/vehicle number: 668647, overall weight: 1,214 kg, load capacity: 210 kg, arm reach: 3,300 mm, This is a KUKA KR 210 R3300 K ultra industrial robot with KRC4 controller, year of manufacture 2014. We are also happy to offer you this robot fully refurbished! Iodpfxoywu Ude Anwoau The robot is equipped with the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Year of construction: 2009, condition: ready for operation (used), A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible. Iaedpfxoyvuuue Anwsu

Condition: repair required (used), functionality: fully functional, mileage: 444,876 km, power: 158 kW (214.82 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 7,040 kg, maximum load weight: 4,875 kg, overall weight: 11,990 kg, tire size: 245/70 R 17.5, axle configuration: 2 axles, wheelbase: 4,100 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 41 m³, loading space length: 5,850 mm, loading space width: 2,380 mm, loading space height: 2,400 mm, Year of construction: 2018, operation weight: 11,990 kg, Equipment: ABS, AdBlue, EBS, central locking, cruise control, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, seat heater, soot filter, spoiler, tachograph, traction control, RENAULT D12-210 – 4X2 – EURO 6 – BOX BODY WATER CONSUMPTION – ENGINE OVERHEATING!! First registration: 08/03/2018 444,876 km Engine: DTI 5 – 215 HP EURO 6 emission standard AdBlue Day cab Wheelbase: 4,100 mm Mechanical suspension ABS – EBS – ASR – ESP – Lane Departure Warning 6-speed automated Optitronic gearbox Engine brake Cruise control On-board computer Electric windows and mirrors Central locking Roof spoiler POLYFOND box body: 5,850 x 2,380 x 2,400 mm Double floor Side lockers (right) 2 rear doors Isdpfxsx Tqhfe Anwsau Retractable step Tyres: 245/70 R 17.5 Unladen weight: 7,040 kg Gross vehicle weight: 11,990 kg

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Iedoibzbhopfx Anweau Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm Iajdoyah Rvspfx Anwju - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min Iaedpsu H Acyofx Anwju - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: new, table width: 730 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, - Table size: 730 × 210 mm - Travel (X/Y): 500 × 200 mm Ijdpfxoyqwnro Anweau

Condition: used, functionality: fully functional, mileage: 18,000 km, power: 154 kW (209.38 HP), first registration: 03/2019, fuel type: diesel, overall weight: 7,200 kg, tire size: 215/75 R17.5, tire condition: 90 %, axle configuration: 4x2, wheelbase: 4,750 mm, next inspection (TÜV): 04/2026, fuel: diesel, energy efficiency: D, CO₂ emissions: 220 g/km, fuel tank capacity: 100 l, fuel consumption (urban): 15 l/100km, fuel consumption (extra-urban): 12 l/100km, fuel consumption (combined): 14 l/100km, brakes: other, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: air, number of seats: 3, total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 3,000 kg, permissible axle load (axle 2): 4,200 kg, loading space volume: 30 m³, loading space length: 5,500 mm, loading space width: 2,200 mm, loading space height: 2,500 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, car registration, central locking, cruise control, differential lock, electric window regulation, fog lights, full service history, hill-start assist, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, soot filter, spoiler, tachograph, traction control, truck registration, FOR SALE: PROFESSIONAL CATERING TRUCK – FULLY EQUIPPED MOBILE KITCHEN Iaodeywhcbjpfx Anwou We are selling a top-of-the-line equipped Iveco catering truck with a custom body, built as a professional mobile kitchen. The vehicle was worth approximately €200,000 when new, has only 18,000 km on the odometer, and is in excellent condition. The truck is factory fully insulated, allowing operation in all weather conditions, including winter. BASIC INFORMATION Year of manufacture: 2018. Engine: 3.0L – 210 HP / 154 kW. Emission standard: Euro 6. Gearbox: Automatic. Total weight: 7,200 kg. Weight with full water tanks: approximately 6,500 kg. Vehicle length: 8 m. Height: 3.50 m. Mileage: 18,000 km. KITCHEN EQUIPMENT Professional stove with 6 gas burners. Gas installation for 120 kg of gas. Large professional refrigerator. Large freezer. 2 professional combi-steam ovens. 1x combi oven for 10 trays. 1x combi oven for 6 trays. Professional tilting pan for large quantities of food. Professional cooking plate. Professional commercial dishwasher. Ice maker. Large storage space for dishes and equipment. GAS AND ELECTRICAL SYSTEM The entire kitchen runs on gas. All equipment is homologated and certified. Gas can be refueled directly at petrol stations (LPG connection). Approximately 5 kW of electrical power required for normal operation. Electrical connection: 220 V. WATER SYSTEM 400 L clean water tank. 700 L wastewater tank. External water connection. ADDITIONAL INFORMATION The vehicle is registered as a mobile kitchen – no tachograph required. No driving restrictions on Saturdays and Sundays. The truck is fully ready for immediate use at festivals, events, catering services, or film productions. Price: Upon request. For more information or to arrange a viewing, please contact us.

Condition: used, functionality: fully functional, power: 112 kW (152.28 HP), gearing type: semi-automatic, fuel type: diesel, color: yellow, overall weight: 17,960 kg, lifting power: 4,000 kg/m, lifting height: 205,000 mm, tire size: 445 / 65 R22.5, Year of construction: 2021, machine/vehicle number: 2487358, Equipment: all wheel drive, cabin, Technical Data Iaedpfx Ansytn N Eeweu Year of manufacture: 2021 Engine: Diesel Load capacity at max. lift height: 2.5 t Load capacity at max. reach: 850 kg Load center: 500 mm Transmission type: W Dimensions (L x W x H): 6.92 m x 2.45 m x 3.08 m Engine power: 112 kW (150 hp) Net weight: 17,960 kg Displacement: 4.8 l Lift height: 20.50 m Max. reach: 17.8 m Lifting force: 4000 kg/m Max. speed: 40 km/h All-wheel drive, all-wheel steering, stepless hydrostatic transmission Fully operational, standard signs of use

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, Iaodpfsx D Nlujx Anwju • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Condition: excellent (used), Year of construction: 2007, Industrial robot with cell Ijdpjyu Ihksfx Anwjau Model: KR 210-2 2000 Year of manufacture: 2007

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, Price available only for the Top Freezer / Refrigerator AHT Kinley 210 or Epta 210 The horizontal cabinet AHT Miami is not incuded Quick delivery, worldwide Intra-community invoices - excluding VAT Ijdpfjrhwvxsx Anwoau AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, Fun Ice SRL is AHT representative in Romania since more than 25 years AHT reseller of new and used equipments Quick delivery, worldwide Description : !!! Horizontal Cabinet is not included in the offer !!! Only the top freeer / refrigerator !!! AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Iasdpfxsrhwulo Anwou Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Condition: good (used), Year of construction: 2013, operating hours: 2,914 h, General information Field of application: Construction Drivetrain Type of fuel: Hybrid Make of engine: Hatz Weights Empty weight: 2.465 kg Functional Mast: articulated arm Lifting capacity: 215 kg Lift height: 1.900 cm Working height: 2.100 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Max. horizontal reach: 1170 m Transport dimensions (LxWxH): (L/B/H): 7,80 m / 1,92 m / 2,29 m Additional information Iasdpjyrw U Ujfx Anwsu Please contact Tobias Mayr for more information

Condition: refurbished (used), functionality: fully functional, load capacity: 150 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts Iajdpforwnphex Anwou - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), functionality: fully functional, load capacity: 240 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Iasdpforqgfkex Anwou Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), functionality: fully functional, load capacity: 210 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Iajdpfxerqf Tke Anwsu Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), KUKA wrist ZH 210/240 Foundry - used & tested completely overhauled, all wear parts updated - completely confused - Operation game Axis 4 - 0.02 WM Axis 5 - 0.02 WM Iajdpfx Asgz Tcienweu Axis 6 - 0.01 WM - KUKA wrist new adjustment - Long test 8 hours at 100% load - Delivery in a special box (protected shipping) - Central trade in exchange (without exchange on request) - Transmission recovery of axles 1-6 - 12 months value added 18 months possible on an extra charge possible On stock more than 100 central hands on stock, various models. Ask a question! Also a express overhaul of your KUKA Central Handheld - From delivery 48 - 72 hours. In addition, we also repair the ABB handgelenke.

Condition: refurbished (used), PRICE ON REQUEST! - used & tested completely overhauled, all wear parts renewed - completely measured Iaodpfx Aeg A Iuyonwou - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Iodpfoi Duh Isx Anwsau Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition Iaedjifu Ayspfx Anweu

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 Iaodpfoyi Ailjx Anwju MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Iaedpoiu U Txofx Anwou Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Domestic hot water systems water supply systems industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11