Used Wmt 2000X1000Nitri for sale (810)

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg Nwjdpeupxdqefx Agrsl dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar Nwsdpfoupxd Djx Agrel dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/sec total power requirement 3 kW weight of the machine ca. 70 t dimensions of the machine ca. 1,2 x 0,5 x 0,75 m Nwsdpfsupxg Eex Agrel Belt sander with - Contact disc: 600 x 75 mm

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg Nodpfsupxkwjx Agrewl dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, width of the strips 100 mm band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm total power requirement 1,5 kW weight of the machine ca. 0,04 t dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Njdpfx Asupxm Eogrowl Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 264 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 44 - 2000 U/min centre height 200 mm Nwsdpfx Aeupxrhsgrol spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 1,5 / 2,4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm Nwodpfeupxrnex Agrsl connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Nwodpjupxr Ujfx Agrsl Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: new, turning diameter over bed 360 mm turning diameter over slide rest 220 mm turning length 1000 mm turning diameter in the gap 380 mm turning speeds 70 - 2000 U/min centre height 180 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 oder 400 V total power requirement 1,8 kW weight of the machine ca. 0.65 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Nwjdpfx Asupxucsgrol Hardened and ground bed rails Complete coolant system Feed protection Machine tools

Condition: new, feed pressure 8 bar Effective free air delivery 235/165 L/min Receiver capacity 50 / 10 l / bar weight of the machine ca. 37,5 kg. Number of cylinders 2 Stk. motor 230V / 1,5KW V / KW Nwodpfx Agju Imp Herel range L-W-H 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. tool trolley with tool set 272 pieces. See pictures Njdpou Imp Tefx Agrewl

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm Nwodpfx Agsvdld Rsrjl turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation

Condition: new, feed pressure 8 bar Nwjdpfx Asu Imhiegrel Effective free air delivery 125/85 L/min Receiver capacity 24 / 8 l / bar weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. motor 230V / 0,75KW V / KW range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. Nwedpfxou Imigs Agrsl All drawers equipped with quick lock and soft-closing mechanism.

Condition: new, press capacity 60 kN oil volume 60 ml Nwodpfx Ageu Imkkorol 5 - 40 Grad C weight 7 kg range L-W-H 430 x 350 x 100 mm Pneumatic impact wrench set 1/2 " 10 pcs. Nuts in 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm 1 pc. 1/2 "extension rod 1 pc. 4 mm Allen key In the storage case

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap 320 mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 38 mm tailstock quill taper MT 3 connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm Nodpfx Aohwavrogrewl bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools

Condition: new, weight max. in kg 3500 kg stroke 4,8 mm fork length 1200 mm battery 80V/280AH Li-ion weight of the machine ca. 5,0 t dimensions of the machine ca. 3,94 x 1,23 x 2,25 m Nwsdjiunmispfx Agrsl New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift.

Condition: new, weight max. in kg 1200 kg fork length 1150 mm stroke height 2700 mm high 1950 mm weight of the machine ca. 0,595 t dimensions 1,71 x 0,8 x 1,96 m The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast that ensure high operational stability. Offering comfortable maneuverability and efficient and effective vertical stacking, this model is ideal for operations Nedsidabgopfx Agrswl in tight spaces.

Condition: new, Load Weight Shelf 10000 kg Loading weight per level 2000 kg Nsdpefgygzjfx Agrewl Number of load levels 5 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions 3,8 x 0,9(1,35) x 2,45 m

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V Nwodofgyh Nopfx Agrel capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm Nsdpsfgyh Tefx Agrewl table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW Nwjdsfgyicjpfx Agrjl weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control Nwedpfxjfgyifj Agrol A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H Nwjdpfx Aefgyigjgrjl with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° Nwsdefg E Hmspfx Agrol High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.