Used Wmw Zeulenroda Pye 100 S1M With Ejector for sale (25,351)

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Ljdpfxju Av E Ho Am Njaa

Year of construction: 1957, condition: ready for operation (used), An untested conventional turret lathe WMW with extensive accessories is available. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/1200mm, weight: approx. 2000kg. An on-site inspection is possible. Ledpfsycwtrex Am Noaa

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Lodpfx Amovy E A Ss Njaa

Condition: used, Year of construction: 1965, There are two WMW SU 315x3000 available, connected load machine 1/ 2: 12.6/ 12kW, weight machine 1/ 2: 8.2/ 9t, machines need overhauling. Lsdpsxg Ihgsfx Am Nsaa

Condition: used, Year of construction: 2019, Two Heckert H55 4-axis machining centers for sale. Travel distances: x: 700 mm, y: 750 mm, z: 780 mm. Machine dimensions: length: 7060 mm, width: 3030 mm, height: 3835 mm, weight: 10,900 kg. Lasdpfx Amsw D Hhco Nja

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Ljdpfxohz Ua So Am Njaa

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos Lajdpfx Aoygh Unjm Noa -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Condition: used, Year of construction: 2026, WMW - ZFTK 500 CNC - system NCT (FANUC compatible) - retrofit appr. in 2020 Laodpfx Aoyl I Hhsm Noa - not all moves CNC controlled - under power - in use

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Ledpfxoxcgyte Am Njaa

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Lajdpfx Amsxcgyge Nsa

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Lodpow Sy D Eofx Am Neaa

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling a variety of liquids. Examples include: - Milk - Water - Alcohol Lodpfsrivxcox Am Nsaa - Disinfectants - Etc. This is a robust machine that operates on compressed air and 220V, Plug and Play! It is ideally suited for filling small batches. Only a very small air compressor is required to operate the machine; if desired, this can be supplied as well. We recommend at least a 12L compressor. The filling machine is equipped with a 1000ml cylinder, allowing it to dispense a maximum of 1000ml per stroke. For larger volumes, multiple strokes can be programmed. For example, 2500ml can be easily filled in 2 x 1250ml. The minimum dosage per stroke is 100ml; any volume between 100 and 1000ml can be filled in a single stroke. We also offer models with cylinders up to 5000ml per stroke. The unit comes with a suction hose, enabling direct suction from a barrel or IBC container. The machine features a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it simple and fast to handle larger quantities. The foot pedal allows for manual filling at your own pace. Depending on the operator and the volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be conveniently placed on a table. Entirely constructed from stainless steel, it is a very high-quality, industrial-grade machine. For questions, please feel free to email; we are happy to assist with this or another machine. We also supply a labelling machine which is a perfect match for the filler. We strive to respond to your inquiries within 24 hours. Of course, we are also available by phone. Our office hours are Monday to Friday, 09:00–17:00.

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Laedpfxoxl Rgie Am Nja

Condition: used, Technical details: floor-plate length: 640 mm plate width: 330 mm Lodpfxou R A A Us Am Neaa Plate thickness: 65 mm

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm Lodpfx Amsu N D Ayj Noaa The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Technical details: height over floor: 930 mm machine weight approx.: 75 +( 27kg Untergestell) kg dimensions L x W x H: 0,6 x 0,48 x 0,43 m EDGE CHAMFERING MILLING MACHINE Application: For chamfering Ljdpfxsu Ngdte Am Njaa Machine table: WxD: 600 x 240mm with limit stop bar LxH: 400 x 25mm built-in tool: cutter approx. 50mm with 45° milling form Chamfering width approx. 6mm voltage: 380 V with ON/OFF switch *

Condition: used, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390 mm table speed: 2,5-25 m/min table surface area: 250 x 1000 mm distance table - spindle center: 550 mm Lajdpfx Asu Ngn Ssm Nea dimensions of grinding wheel: Ø max. 315 x 13-63 x Bohrung Ø 75 mm control voltage: 220 / 50Hz V/Hz total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 3,35 x 1,5 x 2,10 m Die Maschine befindet sich derzeit in der technischen Abteilung. *

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m Ljdpfou Ng Irjx Am Noaa The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Ljdpfx Amsvbh N Rs Neaa Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m Lodpfxju Ng Ncj Am Neaa The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg Lsdpfjwid Uwjx Am Nsaa for thread cutting clockwise and counter clockwise operation *

Condition: used, Technical details: x-travel: 1000 mm y-travel: 350 mm z-travel: 400 mm distance between column - table edge: min.150 / max. 550 mm turning speed range: 28 - 1400 / 18 step U/min tool taper: SK40 Laedpfov Sz Diox Am Noa spindle head swivable left - right: 90° und vor/zurück: 45° ° feed:: X/Y-Achse: 16 - 800 / 18 step mm/min Table dimensions: 1600 x 400 mm table surface area: 1400 x 330 mm total power requirement: 14,5 kW weight approx.: 4000 kg dimension machine xH: ca. 2,0 x 2,4 x 1,85 m

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min Lodpfx Amju Nc Nle Nsaa feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm Lajdpsu Ng Npofx Am Noa dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Laedpfx Ajvbhv Rsm Nsa Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *