Used Zimmer-Group Lcp2505Ak-08 for sale (8,042)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Hfsdpfx Aaok Nk R Doisk Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Profile Scraping unit + Glue scraping unit + Buffing unit

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Hfsdpfjwhi Sljx Aaisk Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Hfodjxlt Hfspfx Aaiek Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Condition: new, Year of construction: 2026, Laser power: 6000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. copper: 8 mm Hfsdpjxaykaofx Aaisk Max. brass: 14 mm Max. workpiece weight: 1000 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 4800 kg Electrical connected load: 34 kW

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sek. total power requirement 3 kW weight of the machine ca. 95 kg turning speeds 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad Hfsdpjyv Nw Rsfx Aaisk

Condition: new, band speed 33 m/s Hsdpjyv Nvgefx Aaisfk grinding band dimension 75 x 2000 mm total power requirement 3 kW weight of the machine ca. 75 kg turning speeds 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)

Condition: new, 32 bore stroke 125 mm Short spindle MK 3 throat 210 mm Machine table - usable table surface 390x390 mm table load 65 kg spindle turning speed range 105-2.650 UpM Hfodeyv Nqwopfx Aaiok total power requirement 0,75 kW Overall size 750x450x1745 mm weight of the machine ca. 192 kg Standard equipment: - Number of speed ranges 9x2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug therefore immediately ready for use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity

Condition: new, dimensions of saw-band 2085x20x0,9 mm capacity 90 degrees: round 185 mm capacity 90 degrees: square 150x150 mm capacity 90 degrees: flat 220x150 mm 110 mm 100x100 mm 110x90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70x70 mm capacity 60 degrees: flat 70x70 mm voltage 400 V sawband speed 35 + 70 m/min. 230 mm total power requirement 0,75 kW weight of the machine ca. 195 kg dimensions of the machine ca. 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice Hedpfx Aaeyv Nhveisfk - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Hfsdpfxewbp Nws Aaijk No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Hfodpfx Asfi Tg Hoaiok No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only Hfjdpeuyhf Hefx Aaiok

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Hodpfx Aaeyv Ev Aoiefk No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2.725 x 27 x 0,9 mm mm Hjdpfx Aajfgyh Hoiefk table height 940 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Year of construction: 2007, condition: used, machine/vehicle number: EKP 84325-81, OPTICAL SORTER FOR CONTAMINANT SEPARATION - SORTEX by Bühler Type: MEAF DevCtrl Hfsdpsyv Aitsfx Aaiok Year of manufacture: 2007 Advanced optical machine designed for automatic sorting of bulk products, primarily foodstuffs, by color, shape, and structure. The unit is mechanically functional. Calibration required. Quoted price does not include transport.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 20369, table width: 400 mm, table length: 570 mm, controller model: POCON 60, empty load weight: 6,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Bidding obligates you to collect the item on time between December 1, 2025, and December 5, 2025! Hedpfx Aasxm Sf Neiofk TECHNICAL DETAILS Table width: 400 mm Table length: 570 mm Magnet dimensions: 260 x 150 mm Control unit: POCON 60 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 5 kVA Dimensions & Weight Dimensions: 3,500 x 3,000 x 2,600 mm Weight: 6,000 kg EQUIPMENT - 4 T-slots - Clamping system - Magnetic clamping plate - ZIMMER + KREIM electrode changer system - Electrode holder - 50-position electrode changer - Storage system with various clamping plates - 2 tool trolleys with suitable electrodes and clamping systems

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 140311, cutting width (max.): 1,150 mm, Equipment: documentation/manual, Paper slicer- DATIEN 115 ECE group SBL Model: CT - 115 ECE Year of production: 2014 Factory number: 140311 Condition: Perfect. The slicer worked in a very small load. Machine connected, possibility of testing. Spare knives - 2 pcs. total 3 pcs. Full technical documentation Attractive price for quick sale. Hodst U D Hujpfx Aaijfk

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Working range laser: 8000 x 2500 x 150 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 15000 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Hfodpfx Aoxra Rweaiek Max. copper: 20 mm Max. brass: 20 mm Length: 20200 mm Width: 4150 mm Height: 2620 mm Machine weight: 32500 kg

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Hfsdpfx Aajwcl Ufjiok Working range laser: 6000 x 2500 x 270 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 5500 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 16300 mm Width: 4150 mm Height: 2620 mm Machine weight: 25800 kg

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 4000 x 2000 x 270 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 3000 kg Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. brass: 20 mm Hedpfxsv Uz Tie Aaiofk Length: 12500 mm Width: 3650 mm Height: 2620 mm Machine weight: 18000 kg

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Hfedjv U A Nxjpfx Aaiok Working range laser: 28000 x 4000 mm positioning speed X/Y/Z: 0,1 mm / 10m Max. workpiece weight: 30000 kg Max. steel: 60 mm Max. stainless steel: 50 mm Max. aluminium: 40 mm Max. copper: 20 mm Max. brass: 20 mm Length: 35500 mm Width: 11000 mm Height: 3000 mm Machine weight: 45000 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Hfodpfxswgm Ibo Aaiok Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible Hfedpfx Aeyv N Agsaiok - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard

Condition: new, 32 mm bore stroke 125 mm Hfedpfsyv Npgex Aaiok Short spindle MK 3 throat 210 mm Machine table - usable table surface 390x390 mm table load 65 kg spindle turning speed range 150-2.500 UpM Power requirement 16 A total power requirement 1,5 kW Overall size 750x450x1745 mm weight of the machine ca. 187 kg Standard equipment: - Stepless speed adjustment - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity

Condition: new, 23 thread capacity M10 bore stroke 90 mm Short spindle MK2 throat 180 mm Machine table - usable table surface 285x285 mm table load 45 kg spindle turning speed range 150-1.250/350-3.000 UpM total power requirement 0,75 kW Overall size 735x470x1080 mm weight of the machine ca. 106 kg Standard equipment: - Digital speed display - Movable LED machine light - Stepless spindle speed via frequency converter - Tiltable work table +/- 45 degrees - Mains cable and plug so ready for immediate use - Drilling table adjustable via gear rack Hodpsyv Nmfjfx Aaijfk - Depth stop with scale - Emergency stop - In accordance with current CE conformity

Condition: new, dimensions of saw-band 2085x20x0,9 mm capacity 90 degrees: round 185 mm capacity 90 degrees: square 150x150 mm capacity 90 degrees: flat 220x150 mm Cutting area at 45 degrees right: round 110 mm Cutting range at 45 degrees right: square 100x100 mm Cutting range at 45 degrees right: flat 110x90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70x70 mm capacity 60 degrees: flat 70x70 mm voltage 230 V sawband speed 30-75 m/min. Vice opening 230 mm total power requirement 2,35 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right Hsdpjyv Nfzefx Aaisfk - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet