Used Zmm - Sliven Lathe-Conventional-Electronic for sale (12,645)

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. Djdpfx Aexu H I Usd Necg The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters and diagnostic data to the controller For the connection of up to eight IO-Link devices Two Ethernet ports with integrated switch Integrated web server for configuration and diagnostics Simultaneous data exchange with the control and the IT world Technical data: Application area Application I/O modules for use in the control cabinet Electrical data Operating voltage [V] 18...30 DC Nominal voltage DC [V] 24 Max. Power consumption [VA] 2.4 Total current carrying capacity [A] 2 Inputs/outputs Total number of inputs and outputs 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs 18; (8 x 2 + 2 x 1) Input wiring digital inputs PNP Power supply [V] 24 Max. Current carrying capacity inputs total [mA] 1600 Dodpfx Ajh N U Sued Necg Input current limit [mA] 200 Short circuit protection digital inputs yes Short-circuit protection digital inputs yes Overload resistance digital inputs yes Outputs Number of digital outputs 10 Circuit PNP Current carrying capacity per output [mA] 200 Short circuit protection yes Galvanically decoupled no Actuator supply of the outputs 24 V DC Interfaces Communication interface IO-Link Ethernet Transmission rate 10; 100 Protocol EtherNet/IP; Modbus TCP IO-Link master Transmission type COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 Number of ports Class A 8 Environmental conditions Ambient temperature [°C] 0...70 Storage temperature [°C] -20...70 Max. permissible relative humidity [%] 95 Protection class IP 20 Approvals / tests Shock/vibration stress EN60068-2-6; EN60068-2-27 Mechanical data Weight [g] 404,5 Dimensions [mm] 105.3 x 45.2 x 113.6 Materials Housing: PA Displays / Controls Display Switching status LED, yellow Operation LED, green Error LED, red Function LED, yellow Remarks Packaging unit 1 piece Electrical connection Screw terminals: ; Grid dimension: 20 mm

Condition: new, neu Bulgarien 109100 € 2061.99 € 890 mm 3000 mm 400 mm 155 mm 490 mm Dodpfewirxqsx Ad Nocg 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 94 720,00 turning length2.000 mm € 98 220,00 turning length4.000 mm € 117 110,00 turning length5.000 mm € 128 100,00 turning length6.000 mm € 144 630,00

Condition: new, neu Bulgarien 53750 € 1015.88 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 M 21 12,5 - 1250 1/min 120 Dcsdpfx Adswirv Ao Neg 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60 - 1/4 Gänge/" 240 - 1 315 mm 90 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 turning length4.000 mm € 63 790,00 turning length5.000 mm € 78 860,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 44400 € 848.04 € 500 mm 1500 mm 250 mm 80 mm 0 mm 400 mm 8 80 M 21 20-2000 1/min 120 Dsdpfx Adowiq Rfj Njcg 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4" Gänge/" 240 - 1 315 mm 1 mm 90 mm 5 MK 2 mm 7,5 kW 3100 mm 1250 mm 1400 mm 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm € 46 190,00 turning length3.000 mm € 50 840,00 turning length4.000 mm € 56 2,00 turning length5.000 mm € 71 400,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107870 € 2038.74 € 800 mm 2000 mm 400 mm Dcjdpfx Aswirghsd Njg 260 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107970 € 2040.63 € 800 mm Dodpfxowiq E Ae Ad Nscg 2000 mm 400 mm 3 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Dcsdpfx Adjwiq Dre Nsg Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 82740 € 1563.79 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake Dsdpfx Aswiq Rxod Nocg longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 68 870,00 turning length2.000 mm € 71 780,00 turning length4.000 mm € 88 640,00 turning length5.000 mm € 101 200,00 turning length6.000 mm € 114 800,00

Condition: new, neu Bulgarien 115600 € 2184.84 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission Dcsdowiqv Ujpfx Ad Neg 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6.000 mm € 151 230,00

Condition: new, neu Bulgarien 122250 € 2310.53 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 M 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment Dodpswiqwfefx Ad Nocg full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 107 770,00 turning length2.000 mm € 112 550,00 turning length4.000 mm € 130 160,00 turning length5.000 mm € 141 250,00 turning length6.000 mm € 157 780,00

Condition: used, Year of construction: 2020, gebraucht 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 Dcedjwirdtjpfx Ad Nsg 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 36,070.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"

Condition: new, neu Bulgarien 77840 € 1471. € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: Dsdpfxswiq Rrs Ad Njcg turning length1.500 mm € 63 970,00 turning length2.000 mm € 66 880,00 turning length4.000 mm € 83 740,00 turning length5.000 mm € 96 300,00 turning length6.000 mm € 109 900,00

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. Djdjxz Tfaopfx Ad Nocg - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. maximum thickness galvanized 0.8 mm. Dedpfxov Stfrj Ad Njcg stainless steel 0.6 mm. straightening haul 5 shafts punching 5 units longitudinal edging cutting rolling touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0443848, center height: 625 mm, center width: 8,000 mm, spindle speed (max.): 355 rpm, bed width: 800 mm, TECHNICAL DETAILS Swing diameter over bed: 1,250 mm Swing diameter over slide: 1,100 mm Center height: 625 mm Distance between centers: 8,000 mm Bed width: 800 mm Spindle bore: 1,100 mm Spindle speed range: 1.8 - 355 rpm MACHINE DETAILS Power: 30.0 kW Djdpfx Aoy Hit Hod Nscg Dimensions & Weight Dimensions (L x W x H): 10,730 x 1,600 x 2,400 mm Unladen weight: 12,000 kg Transport packages: 3 EQUIPMENT Fixed steady rest Four-jaw chuck Three-jaw chuck

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0518100425, center height: 260 mm, center width: 2,000 mm, spindle speed (max.): 2,000 rpm, bed width: 220 mm, control type: manual, TECHNICAL DETAILS Centre height: 260 mm Swing over bed: 460 mm Distance between centres: 2,000 mm Bed width: 220 mm Spindle bore: 82 mm Spindle speed range: 25 - 2,000 rpm Dodpfxey Hicus Ad Nocg MACHINE DETAILS Control: Conventional Dimensions & weight Dimensions (L x W x H): 3,350 x 1,000 x 1,530 mm Net weight: 3,000 kg Transport packages: 1 unit EQUIPMENT Quick-change tool holder Three-jaw chuck Digital readout: SINO SDS6-3V

Condition: ready for operation (used), functionality: fully functional, center height: 700 mm, center width: 800 mm, spindle speed (max.): 240 rpm, bed width: 700 mm, overall weight: 10,000 kg, TECHNICAL DETAILS Swing diameter over bed: 1,400 mm Swing diameter over cross slide: 640 mm Centre height: 700 mm Distance between centres: 800 mm Bed width: 700 mm Spindle bore: 80 mm Spindle speed: 110 – 240 rpm MACHINE DETAILS Power: 11.5 kW Control: Conventional Dsdpfoy Hhitox Ad Njcg Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,500 x 2,500 mm Net weight: 10,000 kg EQUIPMENT Digital readout Quick-change toolholder

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 71, turning length: 360 mm, turning diameter: 440 mm, spindle speed (max.): 5,000 rpm, bar passage: 45 mm, controller model: Fanuc 18iTA, TECHNICAL DETAILS Turning diameter: 440 mm Turning length: 360 mm Spindle speed: 50 - 5,000 rpm on both spindles Bar capacity: 45 mm Dodpfjy E Hpisx Ad Nscg Spindle nose: ASA A2-5 C-axis: 0.001 on both spindles MACHINE DETAILS Control: Fanuc 18iTA Upper turret: 12 driven stations Lower turret: 12 driven stations Main spindle: 11 / 7.5 kW Sub spindle: 7.5 / 5.5 kW EQUIPMENT Chip conveyor Parts catcher Bar loader interface Bar loader: LNS Mini-Sprint S2 42/3M

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 & N Current consumption: 10 / 16 A Dedpfx Adey Iwydj Nscg Motor Power Main motor power: 12.5 HP Pump motor power: 0.05 HP Total power: 12.55 HP

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders Dodpfxoq Npqme Ad Njcg 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: used, Year of construction: 2007, Citizen M32-V Mfd. 2007 Djdpfxeyzkb Us Ad Nocg Hours: 99,608 High Pressure Mist Collector Chip Conveyor Long work piece attachment No tooling 338 Edge Patriot Loader (Accepts 8ft Bars) Machine came out of an Aerospace Company in Michigan.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Dcedpfowcfgbsx Ad Njg Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Dodjwwar Iepfx Ad Nscg Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 2 NCU 2 Syncrons 2 Y-Axis Control: Siemens Solution Line Knoll System Djdpfxjx H H Nrj Ad Necg Bar Feed: IEMCA SIR rack loader (12-ft) 22,000 on-hours 10,000-15,000 Hours