Used 6140R Dd 40 for sale (22,027)

Condition: used, Year of construction: 2015, operating hours: 3,934 h, power: 103 kW (140.04 HP), front tire size: 420/85R30, rear tire size: 650/65R38, Speed: 40, First registered: 03.02.2015, / Compressed air system (2-circuit), three-point / / Rear linkage, lifting roof, / Rotating beacon / _____ / 01A2L 1 6140R All-wheel tractor / Germany / 1002 Dedpsqrrn Sofx Ad Nout

Condition: reconditioned (used), Year of construction: 2004, Koenig DR-RR 400 Extension Module - for Mini Rex 4000 divider - used - year of manufacture: 2004 - weight range: 20–135 g - machine after overhaul Dujdpfx Ajyywdaed Net - machines available prior to overhaul - pickup from warehouse / shipping option - price on request

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm Dedeydqn Sopfx Ad Neut shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom. Dujdpfx Ajxp Ndhsd Nst

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Dujdpfxsx Symne Ad Net Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: new, pressure: 40bending length: 1530column width: 1530daylight: 590stroke lenght (max.): 300messurements (LxWxH): 2660x1960x2500weight approx.: 4600motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Djdpsd Etfzsfx Ad Neut

Condition: ready for operation (used), Zoller CH-2501 projector and transmitted light for H4000, used, in good condition, 100% functional, scope of delivery as per photos. Duodpfxey Rctns Ad Not

Condition: new, Indramat MDD065B-N-040-N2L-095GA0 Permanent magnet motor, SN:MDD65-11228 ,unused, 100% functional, scope of delivery according to photos Dusdpfji D Itqex Ad Nst

Condition: new, Rexroth DDS02.2-W100-BE12-01-FW MNR:R911265340 SN:263406-14367, unused in original packaging, 100% functional, scope of delivery as per photos Dedpfx Adji Ecr Hj Njut

Condition: new, Indramat Rexroth DDS02.2-W050-BE45-01-FW Controller MNR: R911273734 SN:263405-16442, unused in opened original packaging, 100% functional, scope of delivery as per photos Dedei Ebltjpfx Ad Nout

Condition: new, Rexroth / Indramat MDD093B-N-040-N2M-130PA1 Permanent Magnet Motor SN:MDD093-16165, unused in opened original packaging, 100% functional, scope of delivery as per photos Dedpsi D Nbmofx Ad Nout

Condition: new, Rexroth MDD093C-F-030-N2L-110GA2 3-phase permanent magnet motor, MNR: R911258045 , SN:7162006000401 ,unused in opened original packaging, 100% functional, scope of delivery according to photos Djdji D Nhhjpfx Ad Neut

Condition: new, Rexroth Indramat MDD112D-N-040-N2L-130GA0 Permanent magnet motor, SN:MDD112-20415 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Duedpfxji D Nffo Ad Nst

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Dsdpfey N Rfiox Ad Nsut

Condition: excellent (used), Year of construction: 2008, GRASSAIR RLR 40 8B Screw Compressor Atlas Copco screw module Technical specifications: Capacity: 5.30 m³/min (5,300 L/min); Dujdpsw Niprefx Ad Nst Motor power: 30 kW; Max pressure: 8 bar; Operating hours: 12,847 h; Year: 2008; Compressor is fully operational. Net price: 12,200 PLN Gross price: 15,006 PLN Link to video below.

Condition: used, We are offering used grating panels for sale. TECHNICAL DATA Dimensions: 600 x 1,630 x 40 mm Mesh size: 45 x 25 mm Surface: galvanized Condition: used PRICE Dsdpfsy H Hc Sjx Ad Nout €150.00 net per unit (10 pieces) €178.50 gross incl. VAT Available quantity: 304 pieces YOUR CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The extra costs depend on the place of delivery and the volume of the shipment and can be quoted individually upon request. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding, customized quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for intralogistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and trade sectors. We regularly offer attractive used equipment from various manufacturers at excellent conditions. If you have any questions, please do not hesitate to contact us. "Four wins" – The cornerstones of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions.

Condition: used, We offer used grating panels here. TECHNICAL DATA Dimensions: 1,400 x 1,000 x 40 mm Djdpfx Aoy H E I Tsd Nsut Mesh size: 35 x 35 mm Surface: galvanized Condition: used PRICE €210.00 net per sales unit (10 pieces) €249.00 gross incl. VAT Available quantity: 10 pcs YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional cost. The extra costs depend on the delivery location and shipment size, and can be quoted individually upon request. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailored quotation. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per piece/net price or as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and crafts. We constantly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Dusdpfjw U Dt Njx Ad Net Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 Dsdoy N Eqyspfx Ad Nout We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: excellent (used), I offer a professional vacuum pump from the renowned German manufacturer Becker, model VT 4.40. This device is designed for industrial use and is characterized by high reliability and maintenance-free operation. The pump features oil-free (dry-running) technology, which means it does not require oil and minimizes operating costs. Ideal for applications where cleanliness and stable vacuum are required. The visual condition is very good. The device is complete. Technical data: Manufacturer: Becker, Germany Model: VT 4.40 Year of manufacture: 2007 Capacity: approx. 40 m3/h at 50 Hz Vacuum: up to approx. 150 mbar absolute Motor power: approx. 1.25 kW Power supply: three-phase Speed: approx. 1420–1700 rpm Weight: approx. 38–40 kg Applications: CNC machines and vacuum tables vacuum packaging wood industry printing and graphic arts material handling Advantages: oil-free operation – no oil service required quiet and stable performance robust industrial construction long vane life Duodpfeyxgt Iex Ad Net Made in Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: Dedpey Iqn Isfx Ad Nsut * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 Dedpfxsy Iqnzo Ad Neut ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Djdpfx Aovwg Tmjd Nout

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Duodjy Hgi Sopfx Ad Net Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: excellent (used), For sale: horizontal planer/slotting machine from a renowned manufacturer: Ing. Karl Anderle, Steyr (Austria) Robust, heavy-duty industrial machine – ideal for workshop, toolmaking or production. 📊 Technical data: Manufacturer: Ing. Karl Anderle Type: 40 Year of manufacture: 1962 Machine number: 948/336 Working speeds: 30 / 60 / 90 / 180 strokes/min ⚡ Motor data: Manufacturer: FFD Wien Type: DU 1.5/2/4 Power: 2 / 1.5 HP Supply voltage: 380 V Current: 3.3 / 2.9 A RPM: 2800 / 1400 rpm Frequency: 50 Hz 2-speed motor ✅ Condition: Used machine Normal signs of use Good technical condition Complete – as shown in the photos 📹 Video of machine operation available (WhatsApp) 🚚 Transport: Possible shipping on a pallet Personal collection Assistance with organizing transport available Dujdpfx Ajy E N Tded Net