Used D&A 40V for sale (86,322)

Condition: like new (used), functionality: fully functional, DIOSNA SP 160 A D Spiral Mixer Capacity of kneading: max. 160kg dough / max. 100kg flour Lhedpfx Amsy A Nbcszen It comes with 2 removable bowls, the one attached in the photos is a new bowl. Electrical supply: 400v, 32 A 2 timers Completely refurbished Assistance with transportation

Condition: used, functionality: unexamined, Planing machine with planing shaft at the top and bottom Double-sided planing machine Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Electrical connection 61 kW Jointing device at the bottom and top Machine mounted on 2 steel supports, which are approximately 1.5 m longer than the machine Year 1990 Lhedpfey Ryx Uox Amzsn Condition: good

Year of construction: 2017, condition: used, Working width: 2500mm, an on-site inspection is possible, not under power. Ljdpjzy Rvysfx Amzshn

Condition: used, Planing machine with planing shaft at the bottom and top Double-sided planing machine Feed rate steplessly adjustable up to 110 m/min Planing width max. 310 mm Ledpfjy Ry Ddex Amzehn Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top Good condition

Condition: used, Make: Diosna Model: SP 200 AD Machine number: 8810-108 3-phase Includes 2 x large tilting mixing bowls Lodozuyd Aepfx Amzjhn Flour capacity: 125 kg Dough capacity: 200 kg

Condition: reconditioned (used), functionality: fully functional, used L-shaped mixing / kneading machine Diosna D 200 A Plus, extendible, overhauled, for 200 kg dough per bowl, 2 new clocks, with 1 extendible stainless steel bowl, 1 more bowl available for additional €4,500, kneading arm, machine no. 3742-197, 400 V, 50 Hz, 4.7 kW, 10 A, new wheels, newly painted, new electrics, new bearings, new V-belts Lhedjuzlywopfx Amzjn

Condition: used, Extendable spiral mixer Diosna D 200 A Lhodpfoz A Slxox Amzen Dough capacity: 200 kg Flour capacity: 125 kg Bowl volume: 300 l Bowl diameter: 900 mm Timer control with 2 timers Two speed settings

Condition: used, Extendable spiral mixer Diosna D 200 A Dough capacity: 200 kg Flour capacity: 125 kg Bowl volume: 300 l Bowl diameter: 900 mm Timer control with 2 timers Two speed settings Lhjdpfx Ajz A R U Eomzon

Condition: used, Extendable spiral mixer Diosna D 240 A Plus Dough capacity: 240 kg Flour capacity: 150 kg Bowl volume: 355 liters Bowl diameter: 960 mm Lodoz A Sqnepfx Amzjhn Timer control with 2 timers Two speed settings

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Lhodpfx Aszhh Uvemzjn Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Condition: good (used), Year of construction: 2002, functionality: limited functionality, Description Working range: X-axis (longitudinal): 800 mm Y-axis (transverse): 400 mm Z-axis (vertical): 440 mm Lhedpfjvk R Stjx Amzen Table clamping surface: 800 x 400 mm Table load max: 700 kg Sanding head: Grinding wheel diameter: 400 mm Drive power: 4 KW Dimensions / weight / transport dimensions: PACKING LIST: 4500x2300x2800 mm Machine 850x650x1400 mm Control panel 1600x650x900 mm Extraction unit 750x580x1000 mm Cooler 1800x900x750 mm Belt filter with pump 1050x650x2100 mm Switch cabinet 1200x800x400mm Grinding wheels+electrical diagram+operating instructions+stand Weight: 3.700 kg ACCESSORIES AND equipment: ' Magnetic clamping plate SAV 600 x 400 mm ' Coolant system with belt filter system ' Diaform unit type 102/RA210 ' Airtech MFE20-SP extraction system ' Hand wheel ' Various grinding wheels / flanges

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 9421-092, used spiral mixer Diosna SP 180 A D extendible, overhauled, for 180 kg dough per bowl, with 1 extendible stainless steel bowl, 2 more bowls available for additional €2,900 per bowl, stainless steel spiral, machine no. 9421-092, 380 V, 50 Hz, 21 A Ledpfx Amey I A Ndezohn

Condition: good (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: TCG51403A, number of ink cartridges: 4, total length: 4,200 mm, total width: 2,500 mm, total height: 1,500 mm, year of last overhaul: 2023, type of input current: three-phase, input voltage: 380 V, overall weight: 2,200 kg, working width: 320 mm, tank capacity: 5 l, used machine, dismantled Lodpettuiiofx Amzjhn

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 940 kg, total width: 1,200 mm, total length: 1,175 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Lift kneader ++++ TOP model Diosna lift kneader ++++ Dough machine with simple, robust technology for a maximum of 200 kg of dough Stainless steel bowl and kneading arm 2 bowl carriages, 2 speeds Connection 400V, 32A-CEE plug Used machine, refurbished with warranty + service Option: Delivery service Leasing & rental service Maintenance contract Lodpsu A Hhrsfx Amzjhn Service package Delivery with floor anchoring Instruction and commissioning We have a large selection of lift kneaders in stock!

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button Lodpfx Amsy H Eckezehn - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center

Condition: used, Year of construction: 2007, puncher 55 t square edge steel 40 mm round bar steel 40 mm L-beam 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.) Ø 40 x 10 mm Lhedpez St Risfx Amzsn shear: flat material 300 x 15 mm throat 250 mm work stroke 60 mm work height max. 1085 mm total power requirement 4,0 kW weight 1300 kg range L-W-H 2000 x 900 x 1800 mm Equipment: - Electro-hydraulic structural steel shears with 4 workstations * Flat steel shears * Structural steel shears * Punch press * Notching station - Driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at the hole-punching

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. Ljde Adrpaopfx Amzjhn INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28.

Condition: excellent (used), functionality: fully functional, year of last overhaul: 2023, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 1,500 kg, input frequency: 50 Hz, electrical fuse: 16 A, Diosna D 200 A Plus spiral mixer for a maximum of 200 kg of dough Stainless steel bowl and kneading arm 2 bowl trolleys Lhodpfx Aezfxznsmzon robust design 2 speeds Connection: 400V, 32A-CEE plug Used machine Come and visit us!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 07/2027, overall weight: 2,000 kg, input frequency: 50 Hz, electrical fuse: 16 A, TOP Diosna D 240 A planetary mixer Ledpeyy Sbysfx Amzohn Dough machine with flour dust hood 2 mixing bowls 2 speeds with 2 timer switches DGUV V3 certified – available only from us Connection: 400V, 32A-CEE plug Used machine, overhauled & SAB inspected with warranty Optional: Maintenance contract Spare parts box Service package Delivery Training and commissioning We have many other planetary mixers in stock!

Condition: good (used), functionality: fully functional, input voltage: 400 V, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,175 mm, input frequency: 50 Hz, electrical fuse: 16 A, type of input current: three-phase, Lifting Kneader Model: D 200 a Diosna removable kneader Dough machine with flour dust cover 2 bowl trolleys 2 speeds, with safety circuit Ledet Em E Iepfx Amzshn Connection 400V, 16A CEE plug Used machine We have many lifting kneaders in stock!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,300 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Tilting mixer Diosna tilting mixer, extendable Model: D 200 a 2 mixing bowls Robust design 2 speeds Connection: 400V, 32A-CEE plug Lhodpfsuyrzrjx Amzsn Used machine, refurbished Options: Leasing & rental service Floor anchoring Delivery service Maintenance contract E-Box Service package Training & commissioning More tilting mixers in stock!

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Lodexyvaqopfx Amzohn Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 Lsdpfx Ajzt Ai Ejmzjhn with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: used, technically overhauled in 2026 Lhjdpfx Aey H Iqwjmzon Technical data: Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Tailstock travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center - Geometry protocol

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Lsdpfxoyrqzbs Amzshn