Used Ldm 500-60 Und Lascon Controller Lpc03 for sale (65,627)

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Isdpfx Aedux Dujb Nsat Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Iedpox Eiq Hsfx Ab Neat Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270S-500-60 Year of manufacture: 1997 Serial number: 170175 Isdpsx Eiq Tjfx Ab Njat Control system: Arburg Selogica Clamping force: 500 kN Screw diameter: 15 mm

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder ID no. 270 675 02, serial no. as per photo, hole spacing of the mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm, used, Ijdpei D Hdkefx Ab Nsat

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Iasdpfx Ajuif Iujb Net Model B500002P39447 16 bar max. 110 degrees Celsius 60m3/hour 20.2m height n 2900 rpm The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: good (used), functionality: fully functional, grinding length: 1,000 mm, grinding width: 500 mm, Machines are immediately operational. Microstatic is equipped with a 1000x650 mm magnet, Delta with a 1000x500 mm magnet. Iaedpsx Ara Sefx Ab Njt

Condition: good (used), The scope of delivery includes: 16x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Iajdpfx Absi Euu Ue Net Weight: 1,75 kg/ pcs.

Condition: good (used), The scope of delivery includes: 217x shelf connectors, used Manufacturer: Nedcon Type: NS Iasdpji Euvcofx Ab Net Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Weight: 1,75 kg/ pcs.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Manufacturer: Nedcon Type: NS Iaodpfx Aboi Euu Rs Net Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Weight: 1,75 kg/ pcs.

Condition: used, Year of construction: 1997, Micoflow insulator - Glovebox Glovebox insulator The device is unused. with microfilter extraction unit type 112108614A36, flow rate 1870 m³/h with 2 airlocks (for feeding and discharging work materials) Inlet/outlet size: W:400 x D:260 x H:430 mm ilumination Iaodpevw I Npjfx Ab Not 2x glove ports Castors (appliance can be moved) Front panel made of polycarbonate Interior dimensions: W:1200 x D:650 x H:100 mm Machine dimensions: W: 2100 x D: 850 x H: 2100 mm Weight: approx. 400 kg *

Year of construction: 2000, condition: excellent (used), Neuman und Esser ICM 48/60 Classifier Mill, only the grinder without accessories, good condition. Iasdpeh Ugwyefx Ab Njt Additional we have a ICM 8 and a big ICM 1000 for sale

Condition: excellent (used), Year of construction: 2003, Arburg 320S 500-60 Year of manufacture: 2003 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA Additional Equipment: Euromap 12 Robot interface Air valve x 1 Controller with 6 hot runner zones Hardened injection unit - bimetallic Dimensions: Weight: 2,350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Iaedjy Smpvepfx Ab Net Pump/Motor: 11 kW Heating capacity: 4 kW Total power: 15 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, For sale: Screw and barrel for Engel 750 injection unit. Screw Diam. 60 mm Iedeiw Dt Dspfx Ab Noat

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) Iasdoq Ikgkjpfx Ab Njt 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Iaedpfexq Tq Ijx Ab Njt

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system Ijdexwmikopfx Ab Njat

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with Iodpfx Abefu Nbbe Neat automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track Iaodpfx Abox Imqlj Not • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: used, Year of construction: 1997, functionality: fully functional, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, We offer this used Allen-Bradley SLC 500 control unit, year of manufacture 1997. POWER SUPPLY ... 400 EUR INPUT MODULE ... 300 EUR OUTPUT MODULE ... 300 EUR Model: 1746-P2 Ijdpoyutfhjfx Ab Nsat Series: C Supply voltage: 85–132 V AC Supply voltage: 170–265 V AC Frequency: 50/60 Hz Output current at 5 V DC: 5 A Output current at 24 V DC: 0.96 A Max. user current at 24 V DC: 0.2 A Replaceable fuse: 250 V–3 A Temperature code: T3C Class and division: I, Groups A, B, C, D, Division 2 Conductor insulation: copper, 75 °C Country of origin: Malaysia Year of manufacture: 1997 If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2000, 2 Schmalz vacuum lifters, year of manufacture 2000 The lifting devices were stored in working condition but are no longer needed. The smaller unit has a lifting capacity of 500 kg, the larger one 2,000 kg. The price is per unit. Only the vacuum lifters are being offered, not the other items visible in the photos (such as tires, pallets, trolleys, metal buckets, etc.). Collection in Bremen. Iodpfx Aboxxv Eqs Noat _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images provided. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: ready for operation (used), A complete punching system with a grid punch is available. 1) Reel Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000kg. 2) Straightening machine, max. material width: 300mm, max. material thickness: 2mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5m/min, max. material width: 300mm, max. material thickness: 4mm, transport rollers: 2. 4) Punching grid HR 50/600 NL, stroke rate: 300/min, stroke: 30mm-80mm. On-site inspection is possible. Iajdpfx Abjw Az R As Not

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Isdpfx Aberyx Tlo Njat -Conveyor belt roller: transport roller diameter 60 mm -Total length: 500 mm -Holes: 15/12 mm / Ø15 mm M10 see photos -Quantity: 1 piece available -Dimensions: Ø 60 x 500 mm -Weight: 2.2kg

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm Iaedpjrxgwmsfx Ab Not -Transport width: 500 mm -Shots: M10 -2 sprockets: Ø 41 mm, 10 teeth -Quantity: 4x transport rollers available -Price per piece -Dimensions: Ø 60 x 500 mm -Weight: 3.1 kg/pc.

Condition: good (used), Pipe grab, round grab, laying tongs, round material grab, scissor grab, rectangular tongs, clamp, clamping pliers -Manufacturer: Siegert, rectangular pliers type GZ -Grasping range: 20 to 60 mm -Load capacity: 500 kg -Quantity: 1x gripper available -Price: per piece -Dimensions: 500/100/H350 mm -Empty weight: 17 kg/pc. Iedolg H I Ijpfx Ab Nsat

Condition: good (used), 20,000 Trolleys 80 x 60 cm, 500 kg load capacity Used goods, good condition, see pictures Load capacity: 500 kg Own weight: 7.7 kg Length: 80 cm Width: 60 cm Height: 22 cm 2 fixed and 2 swivel castors Color black Material PP Dimensionally stable and robust Can be stacked on top of each other Negotiated price: € 17.50 net from stock Isdpetxztbjfx Ab Nsat Sales price: € 13.50 net from stock for orders of at least 100 pieces Selling price: € 9.80 net from stock for purchase of one truck (924 units) Goods are in stock. Transportation and assembly possible on request. Inspection possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).