Used Mit Rollkran Kennis 16.000& Steinzange for sale (7,185)

Condition: used, axle configuration: 3 axles, first registration: 06/2006, Year of construction: 2006, Trailer with crane Kennis Type 16.000 2 steering axles Stone clamp Psdeyuyniepfx Afgjpt Immediately available German vehicle Kennis 16.000 (Hyva) Lifting moment: 1600 kNm at max. outreach: 9.55 m, max. lifting capacity: 1.4 t Support: vh Slewing range: 400° Engine: 2-cylinder

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 12/2024, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 1,435 mm, total width: 2,475 mm, Year of construction: 2024, Equipment: ABS, PACTON tri-axle steered crane trailer, type TPL.342.C-B Dimensions and Weights: Chassis length: 13,300 + 200 mm Loading platform width: 2,475 mm Ppodpfxoy Haclj Afgjt Overall width: 2,550 mm Front overhang: 1,200 mm Wheelbase (axle 2): 8,000 mm Rear overhang (axle 2): 3,800 mm Kingpin-support distance: 2,500 mm Front turning radius: 2,040 mm Axle spacing: 2,020 mm Neck height: 270 mm Fifth wheel coupling height: 1,165 mm Loading height: 1,435 mm Fifth wheel load: 15,000 kg Total axle load: 27,000 kg Gross weight: 42,000 kg Axles and Air Suspension: SAF air suspension with three rigid, low-maintenance axles fitted with disc brakes, technical axle load per axle 9,000 kg, equipped with a height control valve on axle 3. Raise/lower valve fitted. The rear two axles are steered via a Tridec single-rod steering system (linear). Lifting axle on the 1st axle, operated manually. Tires: Single tires with 6 steel rims, 22.5 x 11.75 (hub-centered), fitted with Pacton-selected top brand tires 385/65 R22.5 (Goodyear, Bridgestone or Continental). Floor: Complete TÜV-approved floor, including central 4 mm steel floor. Steel floor 4 mm thick, between the longitudinal beams. Front Wall: Detachable aluminium front wall, 1,200 mm high, 6 mm thick. At approx. 350 mm height on the outside is the light/air console with connections. Access ladder on the left side with four steps. Side Walls: 2 x 5 foldable (3 hinges per side wall) and removable side walls made of aluminium, 1,000 mm high Kinnegrip stanchions in aluminium version (K20) Aluminium partition board including 4 x 2 stanchion pockets and 2 x plug-in stakes Kennis loading crane R16/71-3 incl. premium stone grab Sample pictures, crane images to follow shortly. Available immediately.

Condition: used, first registration: 01/2013, Year of construction: 2013, Kennis 16-R/7.10 loading crane ? Year of manufacture 2013 ? Radio control prepared----Technical data Manufacturer: Kennis * Model: 16-R/7.10 Pedoyn Tvmjpfx Afgept * Year of manufacture: 2013 * Max. hydraulic pressure: 285 bar * Reach / lifting capacity as per diagram: * 3.50 m – 4,500 kg * 4.70 m – 3,350 kg * 5.90 m – 2,550 kg * 7.10 m – 2,100 kg * Slewing range: approx. 400° * Stabiliser width: 5,400 mm ----Condition used, fully functional * visually shows rust and signs of use * hydraulics present * see pictures for details ----Scope of delivery: crane as pictured * sold without any warranty or guarantee For further information, please do not hesitate to contact us.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2007, next inspection (TÜV): 07/2022, Equipment: ABS, M & V Rolling Crane Semi-Trailer Side walls 3rd axle steerable Kennis crane type: R - 16 / 7.10 At 7.10 m - 2100 kg lifting capacity Pallet fork Further information available upon request. Podpfxexplq Ro Afgept

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed semi-trailer with Kennis Type 16.000 roll-off crane and hydraulic outriggers ---- * Manufacturer: Schwarzmüller * Model: Flatbed semi-trailer plus Kennis Type 16.000 roll-off crane with hydraulic outriggers * First registration: 02/2009 * Gross vehicle weight: 39,000 kg * Unladen weight (as per registration): 7,950 kg * Payload: 31,050 kg * Axles: 3 x Mercedes, 1st axle is a lift axle / 3rd axle is forced-steering * Suspension: Air suspension with raise/lower function * Tyres: 385/65 R 22.5, approx. 50% tread * Platform internal dimensions: approx. 13.50 m long x 2.48 m wide x 1.00 m high * Colour: Chassis black, side boards yellow * EBS * Kennis Type R-16/7.10 roll-off crane, year 2009, with hydraulic outriggers * 3 hydraulic extensions * Max. outreach at 7.10 m = 2,100 kg * Short arm at 3.50 m = 4,500 kg * 5th & 6th auxiliary hydraulic circuits * Elevated seat with joystick controls * Hatz diesel engine with Silent Pack * Container locks for 20ft or 40ft containers * 5-part aluminium side boards * Rear swing door * Access ladder at rear left * Removable stanchions * Lashing rails left and right for load securing * Wooden/steel floor * 2 toolboxes left * 1 toolbox right * Single wheel arches * Full load outrigger supports * Reversing lights * Spare wheel holder * Pallet fork available at extra cost Ppedpfegbtdvox Afgjt German trailer!! German documents!!

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed trailer with Kennis type 16.000 roll crane and hydraulic outriggers — Manufacturer: Schwarzmüller — Model: Flatbed trailer with Kennis roll crane type 16.000 with hydraulic outriggers — First Registration: 02/2009 — Gross vehicle weight: 39,000 kg — Unladen weight (as per registration): 7,950 kg — Payload: 31,050 kg — Axles: 3 x Mercedes, 1st axle is a lift axle / 3rd axle is steered — Suspension: Air suspension with lifting/lowering function — Tyres: 385/65 R 22.5 approx. 50% tread remaining — Internal flatbed dimensions: approx. 13.50 m long x 2.48 m wide x 1.00 m high — Colour: Chassis black, side walls yellow — EBS (Electronic Braking System) — Roll crane: Kennis type R-16/7.10, year 2009, with hydraulic outriggers — 3 hydraulic extensions — Max. outreach at 7.10m: 2,100 kg — Lifting capacity at 3.50m: 4,500 kg — 5th and 6th control circuit — Elevated seat with joystick controls Podjgt Si Tepfx Afgopt — Hatz diesel engine with silent pack — Container locks for 20 ft or 40 ft containers — 5-piece aluminium side walls — Rear swing doors — Access ladder at rear left — Removable stanchions — Lashing rails on both sides for securing cargo — Wooden/steel floor — 2 toolboxes on left side — 1 toolbox on right side — Single mudguards — Full-load support legs — Reversing lights — Spare wheel bracket — Pallet forks available at extra cost

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. Ppsdpfezaakhox Afget In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Psdpfjzaahmox Afgjpt Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: excellent (used), Hydraulic cylinder, support cylinder -Piston diameter: approx. 130 mm Pedpfeb A Hvljx Afgopt -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers -each cylinder with hand pump -Number: 3 cylinders available -Price: per piece

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. Psdpfsy Uh Sqox Afgspt - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Pjdpfoy Uh Rmjx Afgspt

Condition: used, Dimensions: 600 mm x 380 mm x 220 mm - Control unit suitable for Weinig window machines. Ppsdpfolkckuex Afgjt - 3 units available. Price per unit: €690.00 + VAT.

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. Ppodpfx Ajyxr T Tofgot 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91130417, Year of construction: 2018, operating hours: 320 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,550 mm, load center: 600 mm, mast type: triplex, construction height: 2,200 mm, battery model: PzS, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 1,150 mm, Equipment: UVV, Jungheinrich ETV 216 reach truck with a 500DZ triplex mast, in very well-maintained condition. Pedpfx Afey Tpuksgspt The unit has few operating hours, an integrated side shifter, full free lift, and a compact design. Technically and visually in good overall condition, ready for immediate use, including charger. Export and transport are possible.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. Ppjdjy Rh Nzepfx Afgst The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: good (used), - Type: GS - 250 - serial no.: 14 - Year of construction: 1999 - Dimension min.: L1100mm x W800mm x H900mm - max.: L1700mm x W1300mm x H900mm - Power type: 1 x 220V / 50HZ / 7.8 A - Connected load: 1500w / 2800 MIN - 1 kW Ppedpfx Asrgqp Nofgst - Price on request

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be set up Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4,650 x 2,400 x 3,100 mm Ppsdpfx Aog Saqvjfgst 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 controller - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions: 3,500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x polishing stations, - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Gripper change cabinet Belt conveyor Interoll Automation GmbH - Total length approx. 2,000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to customize every detail as shown in the video.

Condition: new, Warehouse stage 16,000 x 5,000 mm, capacity 500 kg / m ² Ppjdpfx Afjd Htr Toget Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions surface Max: 16,000 x 5,000 mm Floor area: approx. 80 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 10 stand on one side of 100 x 100 x 3 mm 8 main beam C + 300 x 3 mm, L = 3,990 mm 18 crossbar S + 300 x 2 mm, L = 4,800 mm 36 bracket 4 Cross associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S Ppsdpjykuh Njfx Afgst with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm Ppjdpfeyktv Ssx Afgst ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Ppedpfx Afsx Ta Nxoget Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S Ppjdpfx Afoykud Rjgst with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Pjdpfsyktrtox Afgopt FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Ppodpoykub Ajfx Afgjt Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: like new (used), first registration: 12/2023, Year of construction: 2023, operating hours: 160 h, Hydraulic oil cooler High-performance hose protection LED light on boom Quick coupler MS01 Standard equipment of the machine, width: 710 mm / 1,100 mm extended 180 mm rubber tracks Double-acting auxiliary hydraulics Podsx Tn Upepfx Afgopt Two travel speeds CE certification This offer is non-binding; no guarantee for equipment details. Subject to errors, changes, and prior sale!