Used 3X Propeller Agitator 8,5Kw Agitator for sale (2,461)

Condition: good (used), For sale are three DRK66D propeller mixers from Erwin Stelzer Warburg, equipped with an emergency stop switch. Product specifications: 8.5 kW 380/660 V 20.5/11.9 A 960 rpm Propeller diameter 400 mm Flange diameter 400 mm 0.74 cos φ Operating mode S1 Insulation class E Ljdsfr Igujpfx Aa Rjrr IP44 50 Hz

Condition: good (used), total height: 7,500 mm, outer diameter: 2,750 mm, 32000l Insulated stainless steel tank with a side-mount propeller agitator Diameter: 2.75 m Height: 7.5 m Slightly conical bottom Lrjdpfxezvwlgo Aa Rer It has legs

Condition: new, Factory-new stainless steel agitator tank with propeller agitator Type: CILC100BRWP Volume: 109L Design: Vertical construction on legs Version: Single-walled Product-contact material: 1.4301 stainless steel Surface: Satin-finished exterior, interior BA finish Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Hinged lid, half bolted, half foldable Bottom: Conical bottom with forward-extended DN25 pipework, DIN11851 Lrjdpfx Aajw Dy H So Rer Tank dimensions: Tank diameter: 477mm Overall height: 930mm (plus agitator motor) Cylindrical height: 600mm Leg height: 330mm Equipment: - Hinged lid with stainless steel sheet grate as reach-in protection, bolted, removable - Hold function for hinged lid - 1x DN25 discharge ball valve, DIN11851 Agitator: Propeller agitator Brand: Schwarzer Rührtechnik GmbH Type: SRT4-1000 Power: 0.25kW Speed: 980 RPM Operating voltage: 3PH 400V Product-contact material: 1.4301 stainless steel - Heavy-duty agitator shaft mounted to agitator motor, non-removable - Shaft balanced for concentricity within speed range - 1 piece 3-blade mixing propeller Ø125mm screwed onto end of agitator shaft - Stainless steel flange with V-ring seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, emergency stop, phase inverter, no-voltage release

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is model 8M 63G.D2. Data for the agitator: RPM: 225 V: 220 / 380 kW: 1.5 Shaft length: 500mm Lrsdpfx Aajga I T Io Rjr Impeller diameter: 240mm Connection: DN200 Further information can be found on the nameplate.

Condition: good (used), For sale are four propeller mixers, model DRK64D, manufactured by Erwin Stelzer Warburg. One propeller blade is slightly bent. Product data: 11 kW 380/660 V 25.0/14.5 A 1450 rpm Shaft length 600 mm Blade diameter 340 mm DN250 Lsdpfofr Iihex Aa Rorr 0.85 cos IP44 50 Hz

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: 18/4 kW 380V 34.2/10.8 A 980/480 RPM Shaft length 780mm Impeller diameter 420mm 0.92/0.68 cos IP 44 50 Hz Operating mode S1 Insulation class E Nameplate (photo) Lredpfxsfr Ifdo Aa Rsr

Year of construction: 1991, condition: used, For sale is a propeller mixer from Geppert Rührtechnik. It is the SPF 4 /1.1 model. Year of manufacture: 1991. Ledpfx Aajga D Ero Rsrr Mixer data: RPM: 1400 V: 220 - 380 kW: 1.1 Shaft length: 1010mm Impeller diameter: 180mm Connection: DN80

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is the DRX3204D model. Lodpfxjga I Sxo Aa Rsrr Agitator data: RPM: 1435 V: 220 / 380 kW: 2.2 Shaft length: 500mm Impeller diameter: 280mm Connection: DN250 Further information can be found on the nameplate.

Condition: used, For sale is a propeller mixer from Erwin Stelzer Warburg. It is model SM/62E.D2. Mixer specifications: RPM: 985 V: 230 / 400 kW: 0.75 Shaft length: 400 mm Propeller diameter: 220 mm Connection: DN200 Ljdpsga I Tysfx Aa Rorr For further information, please refer to the nameplate.

Condition: used, For sale are eight propeller mixers from Erwin Stelzer Warburg. These are model DRH 64. The condition ranges from good to heavily used. RPM: 1450 V: 220/380 kW: 7.5 Lredpjga Dv Hofx Aa Ror Shaft length: 740mm Impeller diameter: 320mm Connection: DN250

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. Lrjdjzk U Hwopfx Aa Rsr The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. The machines can be inspected under power at any time by appointment.

Condition: good (used), Year of construction: 1999, We offe an nice condition machine cnc smal size parts , machine was used in school for training purpose only. Ledevnzz Topfx Aa Rerr

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,000 kg, type of input current: three-phase, input voltage: 400 V, input current: 1,250 A, Complete medium and low voltage system including three 1000KVA 20KV transformers Comprised of: 3x Pauwels transformer 1000KVA 20000V 1x Alstom medium voltage switchgear for incoming ring circuit, 20KV Alstom load disconnect switch tap-off Outgoing measurement, 3x fuse outgoing circuits for 3x transformers 1x Siemens Sikus low voltage switchgear, power supply from 3 transformers, incl. 3 coupling switches for busbar connection Various outgoing terminals NH00 NH1 NH2 For further questions, please contact by phone or email. More pictures and details, nameplates available on request. Top condition – almost as new – see pictures. Dismantling was performed by an electrical company. All busbar connectors and bolts are included. Internal wiring for power metering has been withdrawn and labeled. Lodpoy Hf Umefx Aa Rsrr Volume: one complete truck, 13.6 ldm, approx. 13,000KG including transformers. Collection only by appointment in 75053 Gondelsheim. A forklift is available for loading. Shipping possible via freight carrier, please inquire with postal code.

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 Lredpfxjzun Hlj Aa Rjr External/jacket: 316L stainless steel Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Empty weight: 570 kg / 1,257 lb Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Lrsdszhnlzepfx Aa Ror Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2000, loading space length: 18,100 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 18,100 mm, total width: 2,500 mm, total height: 900 mm, color: other, Year of construction: 2000, Equipment: crane, Superstructure Construction year: 2009 Crane Number of hydraulic extensions: 5 Remote control: ✓ Rotator: ✓ Meter capacity: 15 m Capacity kilo: 5700 kg = More information = Axle configuration Rear axle 1: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 2: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 3: Double wheels; Max. axle load: 9000 kg; Steering Weights Empty weight: 9.950 kg Carrying capacity: 29.050 kg GVW: 39.000 kg Functional Crane: PALFINGER 17502, year of manufacture 2009, behind the cab Make of bodywork: PALFINGER 17502 Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good Ljdpfx Aozl Rrxea Rorr Financial information Price: On request Identification Registration number: OR-33-ND = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2000, loading space length: 18,100 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 18,100 mm, total width: 2,500 mm, total height: 900 mm, color: other, Year of construction: 2000, Equipment: crane, Structure Construction year: 2009 Crane Number of hydraulic extensions: 5 Lodpfeyx Iv Rox Aa Rerr Remote control: ✓ Rotator: ✓ Meter capacity: 15 m Capacity kilo: 5700 kg = More information = Axle configuration Rear axle 1: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 2: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 3: Double wheels; Max. axle load: 9000 kg; Steering Weights Empty weight: 9.950 kg Carrying capacity: 29.050 kg GVW: 39.000 kg Functional Crane: PALFINGER 17502, year of manufacture 2009, behind the cab Make of bodywork: PALFINGER 17502 Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good Identification Registration number: OR-33-ND = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Ljdpfxozimv Ie Aa Rsrr

Condition: new, mileage: 40 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 500 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, air conditioning, central locking, crane, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 tipper truck with crane and remote control, delivery time 2 months, the vehicle is available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the finished vehicle with crane and tipper body approx. 500kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with electrical connector (factory-fitted) - Heated exterior mirrors Ledpfx Aaszv Nr Ee Rorr - Automatic climate control - Radio with hands-free phone system - Reversing warning system - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum tipper body - Controllable manually and via crane remote control - Internal dimensions: 2575 mm x 1775 mm x 400 mm - Prepared for side extension to 580mm - Loading height unladen 980mm - Aluminum floor - 6 lashing points, recessed, according to DIN EN12640 1000kg - Aluminum side walls, folding, upper edge protected - Rear wall with pendulum automatic and folding - Work light Crane: F32 with remote control, 3 x hydraulic, 1 x mechanical extensions - Lifting capacity according to manufacturer: 3.20m = 815kg, 4.40m = 575kg, 5.60m = 400kg, 6.80m = 300kg, 8.05m = 220kg - Design according to CE directive (EN 12999) - Slewing range 370° (mechanical slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard-chrome plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling 30° and 180° - CE, incl. M.O.L. - Standard color RAL 3020 traffic red - all cylinders painted black - Load hook and mounting brackets - Dead point above the support legs (cannot be tilted) - Painting with epoxy primer and topcoat: two-component or powder coating - Support plates - Articulated support plates (2 pcs) for support legs - CE version - Subject to errors and prior sale. ?si=wuCaQnJSZ8LahUV9 ... Climate control, climate control system, VAT can be shown separately, ASR, ABS, radio, on-board computer, heated mirrors, electric immobilizer, central locking with remote control, trailer coupling, power steering, rev counter, limited-slip differential, tinted glass, spare wheel, twin tires, cab: short cab, electric windows, auxiliary headlights, thermal protection glass, auxiliary drive, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rentable, particulate matter sticker: 4 - green.

Condition: new, mileage: 90 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 4,635 kg, maximum load weight: 2,855 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 5,371 mm, loading space width: 2,310 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Fuso 9C18 with aluminum platform body, 5.5m. Loading crane behind the cab, delivery time approx. 4 months. Platform body dimensions can still be modified, loading crane with 3 x hydraulic extensions and remote control. - GSR equipment including reversing camera, lane keeping assist, etc. - Cruise control - Double passenger seat - Climatronic - Duonic (automatic) - Wheelbase: 4.75m - Optional trailer coupling 3500kg Permissible total weight: 8550kg, derated to GG 7490kg, payload approx. 2855kg (Total weight 8550kg possible without modification, then payload approx. 3915kg!) - 1x tool box - Rotating beacons, reversing camera, rear warning lights, optional Aluminum platform body: 5500 x 2380 x 500 - Bottom frame anodized with 8 mounted tie-down points per side - Floor recess 24 mm with Sieveck floor panels 24mm - 13 aluminum cross members (80 mm) anodized - 2 x aluminum auxiliary frames (130 mm, reinforced) anodized - Front wall 800mm, incl. front wall supports - Side walls 500mm, 5 hinges per side wall, removable - Side boards made of 25 mm snap lock profiles - Rear wall: height: 500 mm / foldable, 3 hinges - STANCHIONS: fixed at the front, KTL coated, middle stanchions: foldable, K20, removable at the rear Folding loading crane 8m with 3 x hydraulic extensions mounted behind the cab Loading crane Fassi F70B.1.24e 0711.400 FASSI loading crane F70B.1.24e e-dynamic Design according to CE directive (EN 12999) Base unit: F70B.1 e-dynamic Slewing range 400° All hydraulic cylinders double-acting Piston rods hard chrome-plated Single-knee lever system Electronic overload protection device with FX500 Emergency stop and optical alarm (90% and 100%) FASSI stability control FSC incl. LMB II 6 functions RCH or RCS radio remote control (linear levers) with display and XP system Pressure relief and load holding valves Control block with 5 control valves, operable from one side Separate hydraulic tank (33 l) with filter, mounted on the crane base Extendable on both sides, outrigger width 3.30m, hydraulic Outrigger support swiveling 45° and 180° Standard color RAL 3020 traffic red - all cylinders painted black Load hook and fastening brackets Driving position: folded transversely to the direction of travel Dead point above the outrigger beam Observe on-board voltage: 12V 06.91 Fassi RCS radio mini - 6 linear levers 08.88 FASSI stability control FSC-M/1 » incl. LMB II 97.17 IE742 connection box 0711.01.12 special outrigger, outrigger width 4.95m » extendable incl. C.80.02.B dead point rotated by 180° (above the pendulum beam) 96.A2 1 LED work spotlight on the pivot arm » mounted 96.A7 LED for 2 support legs, not mounted » (crane) 96.03 Oil cooler type 60/12 max. 60l pump capacity 95.89 Additional charge for stainless steel screws and stainless steel hose clamps 95.85 Additional charge for Dinitrol application (cavities) 04.T0.99 Zinc primer for F65B.0, F70B.0, » F65B.1, F70B.1 1.00 Black parts with KTL coating 8888 Proportionate transport costs Ledszv Nuaepfx Aa Rjrr 08.32 Slewing valve / load holding valve Slewing cylinder, for all cranes with rack and pinion 9. Special outrigger, outrigger width 4.95m » hydraulically extendable incl. FSC-P 0711.01.18 Special outrigger, outrigger width 4.95m » hydraulically extendable incl. FSC-P OPTIONAL POSITION FSC - P has various working areas, whereby the monitoring of the outrigger width is continuously detected and the corresponding lifting capacity is released. In confined spaces, corresponding loads can also be lifted even with th

Condition: used, mileage: 83,494 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: silver, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 4,000 mm, loading space volume: 33 m³, loading space length: 6,370 mm, loading space width: 2,627 mm, loading space height: 1,948 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, 1. Cab & Interior * Cab: ClassicSpace, 2.30 m, tunnel 320 mm * Cab width: 2.30 m * Cab roof height: 600 mm * ClassicSpace interior * Driver's air-suspended comfort seat * Co-driver's functional seat * Seat upholstery: velour (driver + co-driver + middle seat) * Side roller blinds (driver & co-driver) * Air conditioning * Roof hatch / ventilation flap * Storage compartment cover, driver and co-driver side * A-pillar trim * Tinted windshield * Interior color: greige/anthracite * Smoker's package * Compressed air connection in the cab * Instrument cluster: 10.4 cm * Classic cockpit * Radio with USB & Bluetooth * Standard speakers * Central locking ----2. Engine & Drivetrain * Engine: OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * Euro V export version * OM471 generation * Engine brake: standard system * Two-plate clutch * Transmission: G 280-16/11.7-0.69 * Mercedes PowerShift 3 * Transfer case: VG 2800-3W, permanent * Axle ratio: i = 5.333 * Reinforced engine mounts * Air compressor: 2-cylinder * Insect screen in front of the radiator * Underride protection under the front bumper * Air intake behind the cab, mounted * Additional fuel pre-filter * Transmission oil cooler * Engine PTO rear, hydraulic pump ISO 7653D * Auxiliary drive (PTO) ----3. Chassis, Axles & Frame * 8x8/4 all-wheel drive * Front axle: 9 t, straight design * Rear axles: 16 t, crown wheel 300, planetary gears * Front spring: 2x9 t, 4-leaf * 2nd axle steered * Rear spring: 2x16 t * Front axle stabilizer * Stabilizer under the frame, rear * High-strength frame, U-profile, hole grid 50x50 mm * Frame overhang: 800 mm * Wheelbase: 4850 mm * Mudguards for chassis transport * Rear underride guard omitted (ECE) * Central lubrication system ----4. Brakes & Safety * Drum brakes, front & rear * Electronic Braking System (EBS) 4th generation * ABS can be deactivated * Parking brake: electronic * Reverse warning * Speed limiter: 80 km/h * Cruise control ----5. Electrical System & Electronics * Batteries: 2x12 V / 170 Ah (Exide) * 12 V / 15 A connection * 24 V / 15 A socket in co-driver's footwell * Truck Data Center 7 (FB Card) * FleetBoard Manager App pre-installation * PSM 2nd generation ----6. Tanks & Fluids * Main tank: 330 l aluminum, left * AdBlue tank: 25 l * Tank cross-section: wide + low ----7. Tires & Rims * Front axles: 385/65 R22.5 on 11.75x22.5 steep-shoulder rims * Rear axles: 315/80 R22.5 on 9.00x22.5 reinforced rims * 2 wheel chocks ----8. Exterior & Body * Bumper: steel (corners) * Bumper center section with towing eyes & coupling Ljdpsym Iy Rofx Aa Rerr * Cab access: movable, left/right * Mirror housing: construction vehicle design * Sun visor: transparent, exterior * Exterior storage compartment flap: left * Construction site filter * Mounting parts for tipper body * Space for control unit between driver's seat & door pocket ----* Tire dimension VA: 385/65R22.5 * Tire dimension HA: 13R22.5 * Fuel tank: 330 l * AdBlue tank: 25 l * Technical gross weight: 48000 kg * Tare weight: 12632 kg * Overall length: * Wheelbase: 4850 mm ----We currently have 3 units available. Vehicle number: 11837, 11835, 11836 Errors and prior sale are reserved. Advertisements and various lettering have been digitally removed. We would be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional charge: In-part exchange of your

Condition: used, mileage: 46,919 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: silver, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 4,000 mm, loading space volume: 33 m³, loading space length: 6,370 mm, loading space width: 2,627 mm, loading space height: 1,948 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, 1. Cab & Interior * Cab: ClassicSpace, 2.30 m, tunnel 320 mm * Cab width 2.30 m * Cab: 600 mm roof height * ClassicSpace interior * Driver's comfort suspension seat * Passenger's functional seat * Seat covers: velour (driver + passenger + center seat) * Side roller blinds (driver & passenger) * Air conditioning * Roof hatch / ventilation flap * Storage compartment lid: driver and passenger side * A-pillar trim * Tinted windshield * Interior color: greige/anthracite * Smoker's package * Compressed air connection in the cab * Instrument cluster: 10.4 cm * Classic cockpit * Radio with USB & Bluetooth * Standard speakers * Central locking system ----2. Engine & Powertrain * Engine: OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * Euro V export version * OM471 generation * Engine brake: standard system * Two-disc clutch * Transmission: G 280-16/11.7-0.69 * Mercedes PowerShift 3 * Transfer case: VG 2800-3W, permanent * Axle ratio: i = 5.333 * Reinforced engine mounts * Air compressor: 2-cylinder * Insect screen in front of the cooling system * Underride protection plate under the front bumper * Air intake behind the cab, mounted * Additional fuel pre-filter * Transmission oil cooler * Engine PTO: rear, hydraulic pump ISO 7653D * Auxiliary PTO ----3. Chassis, Axles & Frame * 8x8/4 all-wheel drive * Front axle: 9 t, straight design * Rear axles: 16 t, crown wheel 300, planetary gears * Front spring: 2x9 t, 4 leaves * 2nd axle: steered * Rear spring: 2x16 t * Stabilizer bar: front axle * Stabilizer bar under frame, rear * High-strength frame, U-profile, hole grid 50x50 mm * Frame overhang: 800 mm * Wheelbase: 4850 mm * Fenders for chassis transport * Omission of rear underrun protection (ECE) * Central lubrication system ----4. Brakes & Safety * Drum brakes: front & rear * Electronic Braking System (EBS) 4th generation * ABS: can be deactivated * Parking brake: electronic * Reverse warning * Speed limiter: 80 km/h * Cruise control ----5. Electrical System & Electronics * Batteries: 2x12 V / 170 Ah (Exide) * 12 V / 15 A connection point * 24 V / 15 A socket: passenger footwell * Truck Data Center 7 (FB Card) * Pre-installation for FleetBoard Manager App * PSM 2nd generation ----6. Tanks & Fluids * Main tank: 330 l, aluminum, left * AdBlue tank: 25 l * Tank cross-section: wide + low ----7. Tires & Rims * Front axles: 385/65 R22.5 on 11.75x22.5 steep shoulder rims Lsdpfx Aoyql Dnoa Rerr * Rear axles: 315/80 R22.5 on 9.00x22.5 reinforced rims * 2 wheel chocks ----8. Exterior & Body * Bumper: steel (corners) * Bumper center section with towing eyes & coupling pin * Cab entry: movable, left/right * Mirror housing: construction vehicle * Sun visor: exterior, transparent * Exterior storage compartment flap: left * Construction site filter * Fastening parts for dump body * Clearance for control unit between driver's seat & door pocket ----* Tire dimension: front axle 385/65R22.5 * Tire dimension: rear axle 13R22.5 * Fuel tank: 330 l * AdBlue tank: 25 l * Technical total weight: 48000 kg * Tare weight: 12632 kg * Overall length: * Wheelbase: 4850 mm ----Currently, we have 3 units available. Vehicle number: 11835 Vehicle number: 11836 = 41863 km Vehicle number: 11837 = 83494 km ----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. For example, we can offer you, for an add

Condition: used, mileage: 41,863 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: silver, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 4,000 mm, loading space volume: 33 m³, loading space length: 6,370 mm, loading space width: 2,627 mm, loading space height: 1,948 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, 1. Cab & Interior* * Cab: ClassicSpace, 2.30 m, tunnel 320 mm * Cab width: 2.30 m * Cab: 600 mm roof height * ClassicSpace interior * Driver's air-suspended comfort seat * Co-driver's functional seat * Seat upholstery: velour (driver + co-driver + center seat) * Side roller blinds (driver & co-driver) Lrjdpjym Iydsfx Aa Rsr * Air conditioning * Roof hatch / ventilation flap * Storage compartment lids on driver and co-driver sides * A-pillar trim * Tinted windshield * Interior color: Greige/Anthracite * Smoker's package * Compressed air connection in the cab * Combination instrument: 10.4 cm * Classic Cockpit * Radio with USB & Bluetooth * Standard speakers * Central locking ---- 2. Engine & Drivetrain* * Engine: OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * Euro V export version * OM471 generation * Engine brake: standard system * Twin-plate clutch * Transmission: G 280-16/11.7-0.69 * Mercedes PowerShift 3 * Transfer case: VG 2800-3W, permanent * Axle ratio: i = 5.333 * Reinforced engine mounts * Air compressor: 2-cylinder * Insect screen in front of the cooling system * Underride guard under the front bumper * Air intake behind the cab, mounted * Additional fuel pre-filter * Transmission oil cooler * Engine PTO at the rear, hydraulic pump ISO 7653D * Auxiliary PTO ---- 3. Chassis, Axles & Frame* * 8x8/4 all-wheel drive * Front axle: 9 t, straight version * Rear axles: 16 t, crown wheel 300, planetary gears * Front suspension: 2 x 9 t, 4 leaves * 2nd axle: steered * Rear suspension: 2 x 16 t * Stabilizer bar on front axle * Stabilizer bar under frame at the rear * High-strength frame, U-profile, hole grid 50x50 mm * Frame overhang: 800 mm * Wheelbase: 4850 mm * Fender for chassis transport * Rear underrun protection omitted (ECE) * Central lubrication system ---- 4. Brakes & Safety* * Drum brakes front & rear * Electronic Braking System (EBS) 4th generation * ABS switchable * Parking brake: electronic * Reversing warning * Speed limiter: 80 km/h * Cruise control ---- 5. Electrical System & Electronics * Batteries: 2 x 12 V / 170 Ah (Exide) * 12 V / 15 A connection socket * 24 V / 15 A socket in the co-driver's footwell * Truck Data Center 7 (FB Card) * Pre-installation for FleetBoard Manager App * PSM 2nd generation ---- 6. Tanks & Fluids* * Main tank: 330 l aluminum, left * AdBlue tank: 25 l * Tank cross-section: wide + low ---- 7. Tires & Rims* * Front axles: 385/65 R22.5 on 11.75 x 22.5 steep-shoulder rims * Rear axles: 315/80 R22.5 on 9.00 x 22.5 reinforced rims * 2 wheel chocks ---- 8. Exterior & Body* * Bumper: steel (corners) * Bumper: center part with towing eyes & coupling device * Cab entry: movable on left/right * Mirror housing: construction vehicle * Sun visor: transparent * Exterior storage compartment flap: left * Construction site filter * Mounting parts for tipper body * Clearance for control unit between driver's seat & door pocket ---- * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 13R22.5 * Fuel tank: 330 l * AdBlue tank: 25 l * Technical gross weight: 48000 kg * Curb weight: 12632 kg * Overall length: * Wheelbase: 4850 mm ---- Currently, we have 3 units in stock. Vehicle number: 11836, 11835, 11837---- Errors and prior sale reserved---- Advertisements and various lettering have been digitally removed.----- We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following ser

Condition: used, mileage: 464,825 km, power: 427 kW (580.56 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.580 4x2 LL GX Tractor Unit | Long Haul | Fully Equipped 3 units available ----Technical Data * MAN D3876 LF11 diesel engine * 427 kW (580 HP) power * 2,900 Nm torque * Euro 6d * Transmission: MAN TipMatic 12-speed automatic * Transmission features: MAN EfficientRoll * Transmission function: MAN Idle Speed Driving * Transmission rocking function * MAN TipMatic drive program * Efficiency Plus, without kickdown function * MAN TipMatic Performance and Efficiency, up to 70,000 kg * MAN TipMatic Manoeuvre, shunting mode * Retarder: MAN Retarder 35 Eco Cool * Engine brake: MAN EVBec high performance engine brake * Retarder Eco Cool * Speed-dependent, adjustable, energy efficient * Low heat transfer to coolant * Max speed: 90 km/h (electronically limited) * Differential locks on powered rear axles * Suspension: Air/air (front and rear axles) * Rims: Alcoa Dura-Bright EVO aluminum * Cab color: Rapeseed yellow RAL 1021 ----Cab & Comfort Cabin: GX | extra high, wide, long * Comfort cab suspension * Additional thermal insulation for cab * Additional acoustic insulation for cab * Electric cab tilting * Roof spoiler + side flaps * Electric glass sunroof * Driver comfort seat, air-suspended * With lumbar support * Shoulder adjustment * Leather/part leather * Seat ventilation, driver's seat * Driver's seat comfort armrests * Adjustable passenger seat (swiveling, folding, unsprung) * Passenger comfort armrests * Leather multifunction steering wheel * MAN ComfortSteering * Digital instrument cluster 12.3" Virtual Cockpit * Electric auxiliary parking air conditioning * Climatronic air conditioning * Auxiliary water heater 4kW * Upper & lower bunks (comfort beds) * Pull-out fridge * 230V socket in cab * Multiple 12V/24V/USB sockets * Electric sun blinds ----Lighting & Visibility * LED main headlights * LED daytime running lights * LED fog lights * LED cornering lights * High beam assistant * Automatic headlight switching with light sensor * Headlight cleaning system * LED rear lights * Rear work lights * Acoustic reversing warning * Stainless steel lamp bracket with auxiliary lights * Sun visor, front windshield Individual Lion * Automatic wiper activation with rain sensor (automatic wipers) ----Safety & Assistance Systems * Adaptive cruise control ACC Stop & Go, distance-controlled * Emergency brake assist EBA * Lane keeping assistant * Lane change & turn-off assistant LCS * Lane return assistant LRA * MAN Attention Guard (drowsiness alert) * ESP / ASR * Speed limiter * MAN EfficientCruise * MAN EasyStart (roll-away protection) * Electronic parking brake * Disc brakes FA+RA ----Infotainment & Connectivity * MAN Mediasystem Professional navigation 12.3" * European navigation * MAN SmartSelect control * MAN Soundsystem Advanced with subwoofer * Smartphone integration * Online traffic * Digital tachograph with remote download * Connectivity board module ----Trailer & Interfaces * Fifth wheel coupling JOST JSK 42 (2") * 162 mm mounting height * Automatic fifth wheel lubrication * Trailer brake connections (2-line) * 15-pin trailer socket * ABS socket * FMS & KSM interface * Preparation for lift/relief axles trailer ----Other Equipment * Light and View Plus safety package * Safety package * Driver assistance package * Driver comfort package Plus for TGX * Interior lighting package Plus * Storage package Lsdpfoy T Ui Hsx Aa Rjrr * Stainless steel front bar

Condition: new, mileage: 90 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 4,635 kg, maximum load weight: 2,855 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 5,371 mm, loading space width: 2,310 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, immobilizer system, onboard computer, traction control, trailer coupling, Fuso 9C18 with aluminum platform body, 5.2m. Loading crane behind the cab, immediately available. - GSR equipment including reversing camera, lane departure warning system, etc. - Cruise control - Double passenger seat - Climatronic (automatic climate control) - Duonic (automatic transmission) - Wheelbase: 4.75m - Optional trailer coupling, 3500kg Permissible total weight: 8550kg, reduced to a gross vehicle weight of 7490kg, payload approx. 2855kg Lrodezvy Nzepfx Aa Rsr (Total weight of 8550kg possible without modification, then payload approx. 3915kg!) - 1x toolbox - Rotating beacons, reversing camera, rear warning lights, optional - Aluminum platform body: 5200 x 2480 x 500 - Floor frame anodized with 8 mounted lashing loops per side - Floor lowering 24 mm with Siebruck floor panels 24mm - 13 aluminum cross members (80 mm) anodized - 2 x aluminum subframes (130 mm, reinforced) anodized - Front wall 800mm, incl. front wall supports - Side walls 500mm, 5 hinges per side wall, removable - Side boards made of 25 mm snap-lock profiles - Rear wall: height: 500 mm / foldable, 3 hinges - STANCHIONS: fixed at the front, KTL coated, middle stanchions: foldable, K20, removable at the rear Folding loading crane 8m with 3 x hydraulic extensions, mounted behind the cab - operable from both sides - 2.52m = 2370kg, 3.82m = 1585kg, 5.42m = 1105kg, 7.02m = 855kg, 8.68m = 650kg - CE version - Load hook More information, more XXL images, directions, on our homepage: For inquiries in English, please call ... Air conditioning, automatic climate control, automatic transmission, VAT can be shown, ASR, ABS, radio, onboard computer, cruise control, heated mirrors, electric windows front, electric central locking, remote control, trailer coupling, power steering, limited slip differential, outside temperature display, electrically adjustable mirrors, tachograph, spare wheel, cab: short, air-suspended driver's seat, electric windows, comfort closing system, heat-protective glazing, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), rentable, particulate matter sticker: 4 - Green.