Used 5/2 Pressure Booster for sale (112,075)

Condition: good (used), 5/2 Pressure Booster -Type: DPA-40-10 537273 -VN: 43 -1: 2.5-8 bar 2: 4.5-10 bar Lodpeb A Sibsfx Amzehn -Weight: 1.5 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, ABB Multimove 2*IRB1200-5/0.9 + IRC5 Multimove controller + TPU, as new DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Ljdoz Tadlspfx Amzohn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Lhsdpfx Amezgq Szjzjn

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) without start control / star-delta connection Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Ledpfxozaaqzs Amzehn Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Visit our always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Lodpfxjw Icn Se Amzohn Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 Lhjdpfjxfwvqsx Amzon for Müller Martini Tempo saddle stitcher. Good condition

Condition: new, For sale: Professional Lowara pressure boosting system (ITT Industries – manufactured in Italy). Brand new, unused equipment. The system was installed but has not been regularly operated. Complete pressure boosting system with two pumps, integrated control panel, and TEKNOSPEED frequency inverter. Technical data: Booster unit: GTKS20 Code: 100001601 Year of manufacture: 2003 Pumps (2 units): Model: TKS2HM7ZT SW1 Power P2: 0.75 kW per pump Input power P1: 1.07 kW Voltage: 230 V / 1~ Frequency: 50/60 Hz Current consumption: 4.9 A Protection class: IP55 Control unit: Control panel QPKTS20/11 230 V 18 A IP55 Automatic pump switching. Fitted with integrated TEKNOSPEED speed controller. Condition: New – warehouse stock. No visible signs of normal use. Minor storage marks possible. Fully operational. Applications: • Pressure boosting systems • Industry and trade Lodpfx Amjz Skz Tezohn • Building services engineering • Water supply Scope of delivery: Complete unit as shown in the photos.

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Ljdpfx Amoz Hifdezjhn Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Lhsdpfx Aszhuitsmzjn Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, FMB programming software, Pneumatic material stop, Measuring / probing device.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 Lhjdpfx Ao Aaaqqjmzen 400V, 50Hz, 9.8kW, 15A Weight: 130 kg

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 250 bar, total length: 607 mm, high-pressure hose length: 10,000 mm, total height: 1,063 mm, total width: 518 mm, type of input current: three-phase, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, Technical Specification Voltage: 3 / 376–424 V / 50 Hz Working Pressure: 80–250 bar Flow Rate: 500–1000 l/h Inlet Water Temperature: 60°C Connected Load: 8.8 kW Nozzle Size: 047 Colour: Anthracite Weight with Accessories: 70.3 kg Weight with Packaging: 78.55 kg Dimensions (L x W x H): 607 x 518 x 1063 mm The compact, vertical design is made possible by the vertically mounted motor and pump. Compact dimensions facilitate storage. Manoeuvrable and easy to transport. Stable during operation. 4-pole, low-speed motor cooled by water and air; reliable stainless steel piston pump and brass cylinder head Long service life and economical maintenance. High performance and efficiency. Lhedpfxew Idutj Amzon Water suction function for water temperatures up to 60°C. Ergonomic Vibrasoft rotary nozzle Reduces vibrations by up to 30%. Reduces noise level and intensity. Rotary nozzle provides support for demanding cleaning tasks. Smart service design speeds up on-site maintenance Rotatable pump head. Convenient oil level indicator and integrated oil drain in the device housing. Modular design comprising pump, motor, and control cabinet. Support systems and LED display Integrated electronic control system. Automatic shut-off in case of network overload. Automatic shut-off in case of phase loss or leakage from the device. Comprehensive range of accessories with EASY!Lock technology Pressure and water volume can be adjusted via the Servo Control regulator located between the lance and the trigger gun. The EASY!Force Advanced trigger gun allows effortless operation. Rotary lance made of stainless steel, 1050 mm in length. Wide range of additional accessories Storage compartment. Adjustable hooks, e.g. for storing a second lance or power cable. High-pressure hose storage compartment.

Condition: like new (used), functionality: fully functional, Combination in as-new condition (hose L=3m and applicator gun are new), the glue unit has hardly been used. This unit features a 5 kg tank and two hose connections. The unit is equipped with a gear pump, ensuring a consistent and even output (no dead stroke as with an air pump). Now offered at a special price for this combination. Lhedpoxr Itasfx Amzjn

Condition: used, functionality: unexamined, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Lhedpfe Ad Nkbex Amzjn Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: excellent (used), mileage: 207,559 km, power: 315 kW (428.28 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,720 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt 15m³ kolkenzuiger (type: 12.0/2.5 - 320) - bovenzijde, links- en rechtsverschuifbaar (zuigslang Ø200 mm) - Hogedrukslanghaspel achterzijde (120 meter hogedrukslang Ø19 mm) - Capaciteit: 3.000 m³ per uur - Speck Hogedrukwaterpomp (type: P45-75 180) - Achterwaarts kippende opbouw met hydraulische bediening - Extra inspectieluiken op slibtank voor reiniging en onderhoud - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Empty weight: 16.700 kg Carrying capacity: 15.300 kg GVW: 32.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: BZ-RB-28 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A Lsdpsymrfksfx Amzohn

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Lodszdumqjpfx Amzehn

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. Ledpfx Amjw Ickaezehn - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: like new (used), Kuka Robot KR 10 R1140 -2 /SEL Ljdpfxjzv U S Rj Amzohn KR C 5 dualcab AC Industrial robot KRC5 Robot KSP-600-S6 Complete and fully operational.

Condition: good (used), Pressure boosting cylinder, pressure boosting of hydraulic pump, hydraulic power unit, hydraulic pump, hydraulic pump -Manufacturer: Mikron, RAM POWER pressure amplifier from a Mikron VC500D CNC machining center -Type: 152 284 4 RP 9813 -Individual components: see photos Ledpfx Ajztpp Eomzjhn -Transport dimensions: 580/215/220 mm -Weight: 12.6 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, WE OFFER AN NICE WORKING CONDITION SPINNER U-620 MACHINE WILLBE AWAILIBLE FROM THE PRODUCTION IN FEBRUARY 2026 WITH MACHINE WILL COMES FULLY EQUIPMENT TOOLS AND ACCESSORIESS WITH FULL TOOLS AND ACCESSORIESS MACHIE WILL BE IN FEBRUARY AWAILIBLE FROM THE PRODUCTION OF TOOLMAKER Lhsdpfx Aeydrztjmzjn TECHNICAL DETAILS: CONTROLS: HEIDENHAIN ITNC 530 YEAR : 2013 SPINDLE WORKING HOURS: 31995 PROGRAM RUN: 30893 MACHINE ON: 49012 TRAVELS AXES: X=620 mm Y=520 mm Z=420 mm Table diameter: 560 mm Max. part weight: 500 kg Max. spindle speed: 12.000 Rpm Connection power: 29kW Tool holder SK40 Tool changer 32-fold Max lenght of tool: 290mm Max mass of tool: 7kg TRANSPORT DIMENSIONS: L 3500 X W 2300 H 2910 WEIGHT OF MACHINE: 7100 KG FOR DISMANTLING AND LOADING WE CARE WITH AN PROFESSIONAL TEAM WE ALSO CAN ORGANIZE FOR CUSTOMERS TRANSPORT TO THE SITE OF THEIR COMPANY

Year of construction: 2018, condition: excellent (used), 2018 Unused Ophir Optronics Spiricon Beamwatch BW-NIR-2-155 In Carry Case With Accessories Lhedpfx Amo Ad Adbozsn Wavelength Range: 980 nm to 1080 nm. Power Range: ~ 400 W to >100 kW. Min/Max Spot Size: Typically Measures Focus Spot Sizes ~ 155μm to ~ 2.75mm.

Condition: good (used), Pressure boosting cylinder, pressure boosting of hydraulic pump, hydraulic power unit, hydraulic pump, hydraulic pump -Manufacturer: Fischer, pressure booster cylinder from Fischer DHS 12/3000 guillotine shear Ljdegw Tvaspfx Amzjhn -Shaft: Ø 65 mm -Dimensions: 1125/340/H580 mm -Weight: 326 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Technipes TE.2/50 S/TV semi-automatic bagging system with gross weigher, year of manufacture 2024 Semi-automatic bag filling and weighing station for 15–30 kg bags, approx. 1 bag per minute, from a gluten-free flour and dry-mix co-packing plant. - Technipes gross weigher with Rubix weighing installation - Manual bag filling and weighing unit - Infeed hopper on metal frame, approx. 160 x 184 cm, fed from the floor above - Outfeed conveyor - Control cabinet Footprint: approx. 350 x 170 cm Condition: used Lot 156. Also in this auction: a second semi-automatic Technipes TE 2/50 SG/TV + LC21, 2024 (lot 81), and two fully automatic Technipes TE.2/50 bagging lines with Europack robot palletising line (lots 42, 46 and 44). Lhodjz Sy E Hepfx Amzon Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 1.950 excl. VAT for this lot.

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Ledpfj Aa Imgox Amzshn Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: used, machine/vehicle number: 14083, Rotor diameter: 600 mm Rotor width: 1450 mm Rotor knives: 5 rows Stator knives: 2 rows Infeed cross-section approx. 1450 x 700 mm Drive motor: 75 kW Lhedsyyd Swjpfx Amzsn

Condition: excellent (used), 1 used, very well-maintained universal milling head System "HURON" with hydraulic tool clamping, coolant through spindle (IKZ), compressed air, and electrical tool release signal. Manufacturer: SEMPUCO, Origin Germany Model: KFU 2-45 Version 025 Technical data: Lodszavrbjpfx Amzshn Spindle connection, DIN 2079: ISO 50, for tools according to DIN 69871 + 69872, Type A Overhang: 377 mm Max. speed range: 3500 rpm 3750 rpm 50% duty cycle/hour 3750 rpm 30% duty cycle/hour Max. drive power: 15 / 22 kW Operating pressure for tool release: 100 + 5 bar Pressure through the spindle, coolant: max. 80 bar Pressure through the spindle, air: max. 10 bar Dimensions L x W x H: 450 x 305 x 360 mm Weight: approx. 180 kg Accessories / Special features: • 2 manual swiveling axes System "HURON" • Hydraulic tool clamping • Electrical tool release signal • IKZ - Coolant through the spindle • Compressed air through the spindle for blowing out the tool holder • For retrofitting to conventional, NC, or CNC milling and bed milling machines or boring machines (e.g.: AUERBACH, UNION, MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, ARSENAL, ...) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany