Used Ab / Jenbacher Ecomax - Jgs 616 (2,7 Mw) for sale (13,759)

Condition: excellent (used), Year of construction: 2012, operating hours: 95,000 h, functionality: fully functional, machine/vehicle number: Vers. J18 (adattato F12), fuel type: gas, power: 2,651 kW (3,604.35 HP), output voltage: 6,300 V, output frequency: 50 Hz, nominal power: 2,714 kW (3,690.01 HP), Currently operational until June 2026. Longblock replacement performed during major overhaul (68,000 operating hours). Upon disassembly, a minor overhaul will be required. Regularly maintained and covered by the supplier’s preventive and corrective service contract. The system is complete with: - heat exchanger for steam production (Siat 1,168 kW); - SEA transformer, 6,300 --> 21,000 V. Dia.Ne version: XT 3. Laodpsrdx Ddefx Amveg

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: Jenbacher, NEW power plant equipped with a reconditioned generating set; two units available immediately. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 15 G2P NGS with containerized Jenbacher JGS 420 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Drawings and engine data sheets are available. Option to switch to the EGHE 200°C + by-pass configuration. Further customization options are available and can be discussed. Ledpfx Aez D H Hajmveag

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, NEW power plant equipped with a refurbished generating set; two units are immediately available. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 10 G2P NGS with a containerized Jenbacher JGS 320 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Lsdpfoz D H Dlex Amvsag Drawings and engine data sheets are available. Option to switch to the EGHE 200°C + bypass configuration. Further customization can be discussed.

Condition: used, Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, Full trigeneration plant with York absorption chiller. Regularly maintained and covered by the supplier’s preventive and corrective maintenance contract. Major overhaul performed in 2021 at 61,000 operating hours. New Long Block (LB) supplied by INNIO on the occasion of the major overhaul, documentation available. Ljdpfxoy Ibldo Amveag • 87,670 plant hours; • 26,904 engine hours; The crankshaft has not been machined, while the engine block has been machined for the use of oversized liners. Overhauled alternator, report available. Price and further information available upon request.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler Laodpjytg Rbofx Amvsg - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit Laodpszazraefx Amvjg - As new - Control cabinet still in original packaging - Located in Genthin We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: excellent (used), functionality: fully functional, fuel type: gas, output frequency: 50 Hz, motor manufacturer: Jenbacher, JGS 620 / 624 GS-N.L units are available, including refurbished units, in both generating set configurations (non-containerized) and containerized versions, with NEW containers and NEW accessories and fittings. Lasdpfjy Uk Dpsx Amvjg Further customizations can be discussed.

Condition: used, Year of construction: 1998, operating hours: 60,000 h, functionality: fully functional, overall weight: 9,000 kg, Combined heat and power plant with generator. Manufacturer: GE-Jenbacher Type: JMS 312-GS-B.L Year of manufacture: 1998 Operating hours: approx. 60,000 hours Rated output: 495 kVA / 526 kW electrical Weight: 9,000 kg Lajdpfx Amszwb E Toveg The unit operated in our facility until recently and was in perfect condition, running smoothly and cleanly. It was regularly serviced by a specialist company. Purchase price (net): €30,000 (negotiable) plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing options available If desired, we can arrange suitable financing through our company. Please contact us. Subject to changes, errors and prior sale. Sale is without guarantee or warranty and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS hours: 84,000 hours overhaul at 60,000 hours. Year: 2008 Rated power: 526KW Laedpfozwpnpox Amveg Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Condition: like new (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 1455607, fuel: liquid petroleum gas (LPG), Jenbacher JMS612 in a container Electrical output: 2004 kW Ljdpfx Ajztw Nasmvoag Thermal output: 2244 kW First commissioning: November 30, 2020 Operating hours: 14,800 h Condition: Like new System is still in operation. Full maintenance contract was in place until recently. Includes flue gas cleaning system (suitable for horticulture).

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min Lasdpfxouprqwe Amvsg From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: used, Year of construction: 2020, 1) Four-stroke engine Jenbacher J 612 GS-J03, operating hours: under 15,000h, ISO standard output: 2,058kW, design: V 60°, number of cylinders: 12, bore: 190mm, stroke: 220mm, displacement: 74.85l, input power: 4,474kW, mixture: 692kW, oil: 204kW, engine cooling water: 315kW, exhaust gas when cooled to 180°C: 638kW, exhaust gas when cooled to 100°C: 909kW, surface heat: 79kW, rated speed: 1,500/min, moment of inertia: 56.67kgm², direction of rotation (viewed from flywheel): left, radio interference suppression level acc. to VDE 0875: N, starter power: 13kW, starter voltage: 24V, mean piston speed: 11m/s, length: 4,246mm, width: 1,886mm, height: 2,503mm, engine dry weight: 9.5t, engine operating weight: 10.3t, 2) Generator Stamford LVSI 804 W, rated output: 2,643kVA, drive power: 2,058kW, rated active power cos φ=1: 2,004kW, rated active power cos φ=0.8: 1,986kW, rated apparent power cos φ=0.8: 2,483kVA, rated reactive power cos φ=0.8: 1,490kVA, rated current at cos φ=0.8: 3,584A, frequency: 50Hz, voltage: 400V, speed: 1,500/min, overspeed: 1,800/min, power factor (ind.-cap.): 0.8-0.95, efficiency cos φ=1: 97.4%, efficiency cos φ=0.8: 96.5%, moment of inertia: 117kgm², cable outlet: left, insulation class: H, temperature rise (at drive power): F, max. permissible ambient temperature: 40°C, weight: 6.752t, with documentation. An on-site inspection is possible. Lsdpfx Amjzvgg Tevjag

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Laedpfx Aez Dvi Remvsg Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: used, maximum load weight: 2,110 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2017, next inspection (TÜV): 04/2028, total width: 2,485 mm, total height: 2,400 mm, * Harbeck 6853 Cable Transport Trailer 2.7 t - 2 axles - new TÜV inspection - * Overall length: 4,466 mm - Width: 2,485 mm - Height: 2,400 mm * Permissible total weight: 2,700 kg - Unladen weight: 590 kg - Payload: 2,110 kg * German vehicle - German registration certificate - immediately available - * Please arrange an appointment to view * Contact: Mr. Andreas Vogel Ljdpfxoy Rg R Rs Amvoag * The information provided online serves as a non-binding description. * They do not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors, and prior sale.

Condition: used, Year of construction: 2008, operating hours: 110 h, functionality: fully functional, power: 834 kW (1,133.92 HP), fuel type: gas, Jenbacher J316 Bio Gas generator containerized set - Manufacturer: Jenbacher - Model: J316 - Hours 110k - Year of Manufacture: 2008 - Rated Output Power: 834 kW - Frequency: 50 Hz - Alternator: Stamford New alt installed 2017 Laodsy S Ttbopfx Amvog -XT4 New turbo installed 2k hours ago. Contact for more info.

Condition: used, functionality: unexamined, total height: 340 mm, total width: 460 mm, total length: 700 mm, overall weight: 50 kg, Ferwood Code: RU0001789 - Manufacturer Code: MW 13,5Y10-4 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a refurbishment service; please contact us. Ledpfxoz Dumbj Amvsag

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, total length: 35,000 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bystronic IG production line for glass units Maximum size: L4200 x H2700 Minimum size: 180 x 350 mm Lsdezxx Etepfx Amvsag (double, triple, and shaped glass) An automatic butyl extruder can be offered as an option. Contact us at 0032479588591 to arrange a visit.

Condition: used, Year of construction: 2012, Fermentation cabinet Fortuna GEK AB 600 This unit is currently undergoing refurbishment (the pictures are from a bakery). Year of manufacture: 2012 Lsdjz A Slrepfx Amvsag Rack for dough pieces up to a maximum of 100 g (higher weights possible with elongated shapes) Working width: 600 mm Discharge time: 20 minutes with 15 cycles Fresh air supply: 3 axial fans Siemens touch screen control Adjustable hourly output and fermentation time Discharge height: approx. 950 mm External dimensions (L x W x H): 465 x 140 x 325 cm

Condition: used, mileage: 613 km, power: 5 kW (6.80 HP), first registration: 07/1989, fuel type: diesel, overall weight: 500 kg, color: blue, gearing type: mechanical, suspension: other, operating hours: 613 h, Year of manufacture: 1989. 13.5 kW, 613 operating hours, 2,800 rpm. Airflow rate: 2.1 m³/min. Fitted with a Deutz engine, highly soundproofed, complete with hoses and hammer set. Permissible total weight: 500 kg. FOR US, CONDITION AND A GOOD FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the provided number. //EXCHANGE, TRADE-IN, OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee. Further offers can be found on our homepage. The description and listed data do not constitute a guaranteed specification and are not legally binding. The only binding agreement is the purchase contract made at our dealership upon buying the vehicle. Subject to errors and prior sale! Laedpfx Ajx Upngsmveg

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Lodpfx Ajwd Nw Tjmvoag Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. Lasdpfx Aozimbkemveg On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: new, maximum load weight: 1,680 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,820 mm, loading space height: 2,000 mm, loading space volume: 12 m³, total width: 2,300 mm, total height: 2,700 mm, Year of construction: 2026, * 230 volt cooling unit * Flat ceiling evaporator * 60 mm insulation * 4 Terra spindle supports * Galvanized V-drawbar Lajdpfxsrb T Nle Amvog * Overrun brake * Sturdy support wheel * Car ball coupling * Interior ceiling light * Scuff plate all around * Alko tandem axle * Double wing door at the rear * Galvanized substructure

Condition: new, maximum load weight: 1,680 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,820 mm, loading space height: 2,000 mm, loading space volume: 12 m³, total width: 2,300 mm, total height: 2,700 mm, Year of construction: 2026, * 230 volt cooling unit * Flat ceiling evaporator * 60 mm insulation * 4 Terra spindle supports * Galvanized V-drawbar * Overrun brake * Sturdy support wheel * Car ball coupling Ledpfx Asrb T Npomvjag * Interior ceiling light * Scuff plate all around * Alko tandem axle * Double wing door at the rear * Galvanized substructure

Condition: used, Year of construction: 2020, KWe: 1222 Lajdpfx Asym Rnqjmvsg Working hours: 29000

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Offer without obligations. Duplo DC 616 - year 2019 Specifications Dimensions (L x W x H): 1600mm x 620mm x 1050mm Weight: 150 Kg Power Supply / Consumption: 230V AC, 50Hz / 100W (0.7 Amp) Input Paper Size Min: 210mm wide x 210mm long Input Paper Size Max: 320mm wide x 650mm* long (330.5 x 999mm) Finished Paper Size: Width: 48mm, Length: 50mm (45mm) Paper Weight Min: 110 gsm Paper Weight Max: 350 gsm Paper Curl: Within +/- 3 mm Paper Type: Uncoated paper, coated paper, laminated paper Capacity: 100 mm Type: Top feed / Belt suction Lajdpeztnfxsfx Amvog - See first pictures (Ask for more detailed pictures !) Price ……… UNDER REQUEST =====