Used Adam D 32 for sale (51,404)

Condition: ready for operation (used), Drilling diameter up to: 32 mm Spindle mount: MT 3 Quill stroke: 120 mm Table clamping surface: 335 x 335 mm Table horizontally swivels by: 360° Maximum distance between table and spindle quill: 530 mm Maximum distance between machined base plate and spindle quill approx.: 1105 mm 6 spindle speeds: 160 - 930 rpm Drive motor: 380 V, 0.9/1.3 kW Space requirements: 470 x 900 x 1780 mm Djdpfoyvtcqex Akmoku Weight: 350 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Main and counter spindle Djdpozvfupefx Akmjku • Maximum turning diameter: 32 mm • Maximum spindle bore: 32 mm • Maximum spindle travel (turning length): up to 310 mm • Spindle speed (main & counter spindle): up to 6,000 rpm • Spindle power (main spindle): 5.5 kW • Spindle power (counter spindle): 3.7 kW • C-axis: Available on both the main and counter spindle (0.001° or 5° mechanical indexing) Axes and control • Number of axes: 9 controlled CNC axes (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3). • Rapid traverse speed: 32 m/min. • CNC control: MAIER PRO - GE FANUC (Fanuc 18iT) Tooling system and machining • Total number of tool positions: Up to 24 tool stations (depending on the configuration, up to 16 of these are powered/rotating). • Cross-axis machining: Typically 5 to 6 fixed turning tools (shank cross-section 16x16 mm) and 4 powered stations. • Back-side machining: Available for simultaneous operations on the main and counter spindle. Dimensions and weight • Machine weight: approx. 3,800 kg to 4,200 kg (machine weight only, excluding bar feeder). • Dimensions (L x W x H): approx. 2,640 mm × 1,600 mm × 1,900 mm. • Coolant capacity: approx. 240 liters

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 13,919 h, load capacity: 3,200 kg, lifting height: 6,000 mm, free lift: 2,130 mm, fuel type: diesel, mast type: triplex, construction height: 2,830 mm, fork carriage width: 1,020 mm, fork length: 1,200 mm, empty load weight: 5,230 kg, total length: 2,850 mm, drive type: Diesel, construction width: 1,230 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 28x9-15 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x ? Rear tire condition: 0 - 20% Battery year of manufacture: 2011 Dkodpfsz H E S Tjx Akmeu Single auxiliary hydraulics, integrated side shifter, cabin with heater, load guard, blue spot, lighting according to StVZO (German Road Traffic Licensing Regulations), 1 work light at the rear.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Dsdszgq Szspfx Akmeku Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. Dodpfxjzxhfie Akmoku The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E motor power 5,5 / 3,5 kW total power requirement 16 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system - Fire protection system, manufacturer KRAFT & BAUER - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” Dksdpfxjytx Sks Akmju The machine can be inspected under power!

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Dkodpfjzump Esx Akmju Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour Dkedpfez Ag Udjx Akmju - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: excellent (used), Drill diameter: 31.75 mm Spindle mount: MK 3 Dodpfx Aez Dt N Ijkmsku Variable speed control: 180 - 2100 rpm Overhang: 280 mm Table size: 350 x 450 mm Maximum distance between table and quill: 700 mm Drive motor: 380 V, 0.9/1.3 kW Weight: 270 kg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder Djdpsznkx Djfx Akmsku PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2002, Double miter saw, manufactured by elumatec, type: DG79/32, year of manufacture: 2002. Digital display for length. 6-meter machine. Oil-mist lubrication system. Machine documentation available. In good condition. Dkodpjz Hmx Isfx Akmou Saw blade: 380 mm x 3.6 mm / 3.0 mm x 32 mm. Further details can be found in the data sheets.

Condition: used, Year of construction: 2013, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10,5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. voltage 380 Volt total power requirement 30.0 kW weight 21300 kg range L-W-H 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools Dksdpez I Dz Asfx Akmju

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Djdpfxeu Nm Nio Akmoku Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm Djdpey Aa H Nofx Akmeku table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. Djdpfowcgr Eex Akmoku FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: used, Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Channel baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connection: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Dedpjz A T I Isfx Akmsku Throughput at: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in fully functional condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, Refrigerant compressors system DWM Copeland -Type: D6DT5-320X-AWM/D (x4) -Volume: 126.9 m3/h (x4) -Cooling capacity: 280 kW at -10°C/40°C, 150.4 kW at -25°C/40°C, 92.8 kW at -35°C/40°C -Dimensions: 3600 x 1100 x 1950 mm -Items in magazine: 2 -Reference number: Z139 Dksdpfx Aoz Hu Spekmou -Condition: Used in very good condition, ready to work

Year of construction: 2012, condition: excellent (used), Category: Twin-screw extruder Number: DE27691 Manufacturer: Feddem Type: DEC 72 MTS Year of manufacture: 2012 Capacity: 400 – 700 kg/h Screw diameter: 2 x Ø 72.0 mm Dkedpfxsvk Sgfe Akmju L/D: 32D, including housing extension to 42D Drive: 168 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing – 2 side feeders, 6 Schenk gravimetric dosing units, ECON EUP 600 underwater pelletizer, Trendelkamp classifying screen, degassing, vacuum pump, BSG control system Very nice complete system with only approximately 3,500 operating hours. The offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry, we have the right product for almost every budget.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Djdpfxex Hgkve Akmoku Machine lamp Quick-change holder with inserts Machine vice

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Dkedpfxjz Dw D Ns Akmsu Visual appearance: good Please contact Arie or Pedro for more information Fruehauf / Hydraulic Ramps / 32 Ton

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 295 kg, We are selling our used Optimum machine. The motor has a defect in the winding. Dkedpfx Akjzxp Nvomju The machine can be inspected and collected in Hoppegarten. No warranty, no guarantee, no returns.

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Dsdownn S Rjpfx Akmeku Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Dedjx N Ih Iopfx Akmoku Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 8,000 rpm, overall weight: 3,750 kg, total width: 2,100 mm, total height: 2,245 mm, bar diameter (max.): 32 mm, product length (max.): 2,289 mm, number of axes: 10, This 10-axis TORNOS EvoDECO 32 was manufactured in 2022. It features a main spindle and counter spindle with a maximum speed of 8,000 RPM, and a bar capacity of up to 32 mm. The machine includes a robust tooling system with multiple rotating tools and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TORNOS EvoDECO 32 swiss type turning machine we have for sale. Contact us for further details. Technical Specification Counter Spindle Yes Dkodez I Sxvepfx Akmeu

Condition: used, Year of construction: 2008, A compressed air compressor is offered. Max. operating pressure: 11.0bar. Rated power: 18.5kW. Motor speed: 2940rpm. Ambient temperature: 3°C / 45°C. Controller: KAESER SIGMA CONTROL. Equipped with oil-water separator. The cooler is defective. The compressor was regularly serviced. Inspection possible by prior arrangement. Dodpfxjz Hn R Ej Akmeku