Used Adpos Power Supply 40 Kva for sale (55,801)

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Transfer: in the current condition as seen -Error: L3 power level defective -Manufacturer: AdPoS, UPS system -Type: UPS Maxi-J FH 40 kVA -Dimensions: 825/440/H1270 mm -Weight: 154 kg Lhedpfsfngw Tox Agtek

Condition: used, Year of construction: 2016, For sale: AEG Protect 8.33 / 40 kVA industrial UPS system with two additional battery cabinets. This system is designed for reliable uninterruptible power supply in industrial environments. Ledpfxjxd Axbe Agtshk UPS Type: Protect 8.33 40-400-384-400 Power rating: 40 kVA Input: 3-phase, 45–66 Hz, 3x400 V, 66 A Output: 3-phase, 50 Hz, 3x400 V, 58 A Power factor: cos φ 0.8 Short-time withstand current: 10 kA (1s) Year: 2016

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Lsdpfx Aget H Irletshk Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Ledozphcpopfx Agtjhk Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos.

Condition: new, Year of construction: 2026, Powered Load Moving Skates with a compact design, low overall height and load capacities of 10, 24, 40, 48 and 80 tonnes. Intelligent Single-Joystick control for all movements. Available in as version with a hydraulic lifting cylinder (+H) or as a DUO or DUO H, with synchronised control of two skate systems. This enables loads to be manoeuvred in a crab steering or round tight bends. The POWER-Skate is the modern way to effectively synchronise or move machinery and equipment in production. Lhsdpfx Agegi Dm Hstsk Please send us your enquiry.

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Lhedpfxswv U N So Agtek Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Lhjdpfey Iu Hnsx Agtjk Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: used, Year of construction: 2015, Technical details: Lhedpfszlic Nsx Agtok table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Lhodezl D Exjpfx Agtjk Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, “Removed from a production facility of an automotive supplier, professionally dismantled.” Quantity: 3 available Designation: Camtec HSEUIreg 04801.18T Manufacturer: Camtec Power Supplies GmbH Device type: DIN-rail switching power supply with programmable output Input voltage: Ledpjzh A Nzofx Agtohk - 90 to 132 V AC / 184 to 265 V AC (47–63 Hz) - 250 to 375 V DC Output: - Output voltage: 0 to 18 V DC (programmable) - Output current: 0 to 40 A (programmable) - Output power: 480 W - Output voltage tolerance: ±0.5 % Interfaces: - Analog control: 0–10 V or 0–20 mA - Remote sense function - DC-OK signal Protection functions: - Overload protection - Overtemperature protection - Short-circuit protection - Overvoltage protection Insulation voltages: - Input to output: 3000 V AC - Input to protective earth (PE): 2500 V AC - Output to protective earth (PE): 500 V AC Mechanical data: - Housing: Metal, protection class IP20 - Dimensions (W x H x D): 130 x 200 x 115 mm - Weight: approx. 2.9 kg - Mounting: DIN rail Environmental conditions: - Operating temperature: -20 °C to +70 °C

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Ledpey Efbkefx Agtjhk

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, secondary voltage: 200 V, type of output current: three-phase, output voltage: 200 V, Equipment: documentation/manual, type plate available, Dry type transformer 3 phase transformer 63 kVa p 3x400V/sz 3x200 V 63kVa 3 phase transformer for sale in excellent condition Manufacturer: Trafó Print type: BTZ63000 power: 63kVa U PRIMARY: 3X400V (3x125A) U SECONDARY: 3X200V frequency: 50Hz GE Record D250 compact circuit breaker Lsdpfx Agsydrgpjtohk steel housing

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Ljdpfx Aezm Srcjgtohk Year of construction: 2014 (New, never used) Power: 30 kW (see photo for more technical details)

Condition: good (used), Power supply module, servo amplifier module, CNC control system, plug-in card -Manufacturer: FANUC -Type: A06B-6150-H075 Ledpewrx Nzefx Agtohk -Dimensions: 300/380/H290 mm -Weight: 20.3 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 -Quantity: 1x Power Supply available Lhsdpfx Aeztppxogtsk -Dimensions: 485/390/H105 mm -Weight: 20.9 kg

Year of construction: 2014, condition: good (used), functionality: unexamined, Description For sale is an industrial DC power supply / direct current power supply, Thumm SNT 20, from a decommissioned system. The unit is designed for high direct currents and is suitable for various industrial applications, testing systems, special machine construction, electroplating, coating, or process systems. Technical data according to the nameplate: Manufacturer: Thumm Type: SNT 20 Device type: DC power supply / direct current power supply Power: 30 kW Mains input: 3AC 400 V / PE, 50/60 Hz Output voltage: 1DC 0–30 V Output current: 1DC 0–500 A Regulation: Constant current / constant voltage Setpoint input: 0–10 V = 0–100 % for current and voltage Cooling: controlled fan Device protection: short-circuit proof, overload protection, thermal protection, mains monitoring Duty cycle: ED 70 % Year of manufacture: 05/2014 Weight: approx. 100 kg Device No.: 21401682 / 9-24 Condition The unit comes from a decommissioned industrial system. It is sold in its removed condition. We have not performed a functional test. See pictures for the visual condition. Inspection possible by appointment. Scope of supply The DC power supply / module shown in the pictures is for sale. Other identical or similar modules may be available upon request. Price Lodezap T Sjpfx Agtjhk A package price is possible when purchasing multiple units. Notes Sale exclusively to commercial customers. Subject to prior sale and errors. Sale is made without warranty, guarantee, or right of return.

Condition: good (used), Input AC: 100–120 VAC, 9 A 200–240 VAC, 4.5 A 50–60 Hz Output DC: 72 V/6.7 A Application: Systems engineering Ljdpfx Aszdynasgtehk Width: 62 mm Height: 125 mm Depth: 120 mm Weight: 884 g Condition: good, second-hand

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2123083B, total height: 560 mm, total width: 500 mm, total length: 580 mm, input voltage: 230 V, temperature: 1,600 °C, input current: 25 A, input frequency: 50 Hz, overall weight: 65 kg, Professional Schultheiss VPC 040 power induction casting machine, manufactured in Germany. High-performance, compact benchtop unit designed for producing top-quality, high-detail castings in gold, silver, and other precious metal alloys. The "Power" version offers increased capacity and faster cycle times compared to the standard model. It features a fully automated, one-button vacuum and pressure application system to ensure exceptional alloy homogeneity and minimal porosity. Key Features: - Fully Automatic Control: 12-step digital casting programs for consistent results. - Advanced Induction Technology: Fast, gentle heating with a mixing booster effect. - Single Phase Convenience: Operates on standard 230V power. - Versatile: Capable of handling fine filigree details and larger solid pieces. Technical Specifications: - Manufacturer: Schultheiss GmbH (Germany) - Type: VPC 040 Power - Year of Manufacture: 2013 - Serial Number: 2123083B - Max. Temperature: Up to 1,600°C - Max. Flask Size: Ø 100 mm x 120 mm - Power: 5 kVA / 25 A (Single Phase, 230V) - Dimensions: 500 x 580 x 560 mm - Condition: Used, visually excellent and clean. Rear ports include Water Inlet/Outlet, Vacuum, and Pressure Gas. Lhsdpoy Tbfzefx Agtsk

Condition: excellent (used), Year of construction: 2014, compact and flexible induction power supply capacities 30kW, with an operating frequency range of 20kHz to 60kHz. Together with air cooler chiller 30kw and accessories Lhsdpfxsy A Ttve Agtsk

Condition: good (used), EA Elektro-Automatik EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Ledpoyplqlsfx Agtohk Condition: Used 6.3A 2400W PD 7.00 Financing through our bank is also available. komplett-konzept.leasingo.de Find more laboratory power supplies – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2017, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module Ledpoxm S I Rjfx Agtehk -Manufacturer: Lenze, L-force Power Supply Module power supply module -Type: E94APNE1004 -Dimensions: 510/210/H290 mm -Weight: 13.6 kg

Condition: good (used), EA Elektro Automatik Type: EA-EL 9080-200 EA Elektro-Automatik Electronic Load (2.4kW) 0-80V 0-200A Technical Data: Mains Input: Mains voltage switchable 115V/230V Mains frequency 50/60Hz Mains fuse T2.5A DC Input: Input voltage U nominal 0…80V Lhodpfszhkcijx Agtek Input power P nominal 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C ambient Input current I nominal 0…200A Overvoltage protection limit 1.1 * U nominal Maximum permissible input voltage 100V Voltage regulation: Setting range 0…80V Display resolution 100mV Accuracy

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Lodedz Srbopfx Agtohk Weight: 23 kg Good condition 2 units available, price per unit

Condition: new, The aggregate is new, complete incl. control, diesel tank, exhaust and batteries. Description Model: NWR44 Ricardo engine newpower generator genset Continuous power: 30,4 kW / 38kVA Lsdpfx Agonkb U Detehk Maximum power: 33,5 kW / 41,8 kVA Engine : Kofo RIcardo N4100DS-38, 4 cylinders water cooled Connection : Power switch Frequency : 50 Hz. Voltage : 400/230 V incl. mechanical speed control , AVR, battery charger, galvanized sound insulation, cooling water heater, control unit : Comap AMF8, mains power supply Dimensions: 2230x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load : 7,9 L/h At 75% load : 6,3 L/h At 50% load : 4,2 L/h Mains monitoring, mains supply Soundproofed Ready for immediate use. additional costs 63A Automatic transfer switch: € 500 100A automatic changeover switch: € 620 Shipping: - A worldwide transport incl. unloading is possible for an additional charge. - To be able to quote an exact freight price please send us an inquiry with your data and complete address -Deliverable from April

Condition: good (used), Input: AC 187–264 V, 5.0 A 47–66 Hz Output: DC 60 V/8.0 A Application: System supply Height: 123 mm Lhodpfjzd S Hnjx Agtok Depth: 100 mm Length: 225 mm Weight: 1708 g Condition: good, second-hand