Used Aeg Am 100 Lt6 for sale (32,789)

Condition: good (used), electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 100 LT6 -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Protection rating: IP54 -Design: B3 Itodpfxey D Ikxe Ag Ajn -Dimensions: 365/250/H210 mm -Weight: 23 kg

Condition: new, AEG Modicon AM-C 916-100 CPU board, serial number 0007107, unused, 100% functional. Itsdji D Tu Ajpfx Ag Asn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Description WEOFFER AN BEAUTIFULL CONDITION REIS PRESS YEAR: 2004 WITH SIEMENS OPERATIONAL PANEL. Description Press force: 1000 KN Press closing speed: 50 mm/s Press opening speed: 50 mm/s Installation height: 1400 mm Maximum table distance: 1700 mm Iedpfexu Ddtsx Ag Ajtn Tables: 1600×1300 mm Allowable weight 12000 kg No.1 clamping table Translation 1500 mm speed 200 mm/s Maximum load 6000 kg Nr.1 Tilting table Angle 60° Maximum load 7500 Kg Overall dimensions: 3900 x 2400 x 3045 mm FOR TRANSPORT WILL BE DISASEMBLED -CILINDER AND HYDRAULIC UNIT TO FIT ON MEGA TRAILER 3000mm height is required. Weight: 17000 Kg

Condition: used, machine/vehicle number: 7693, Winding machine Blume & Redecker AM 100 Ijdpfxeylxh Aj Ag Aetn Winding diameter: 70 mm Laying width: 300 mm

Condition: used, machine/vehicle number: 8544, Coil winding machine Blume und Redecker AM 100 Winding diameter: 200 mm, laying width: 600 mm Maximum wire diameter: 2 mm Ijdpfx Asylzghjg Ajtn

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm Iedpoz Snrnofx Ag Ajtn T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: used, Second-hand gang saw motor (electric motor) AEG type AM 280 SX 4 for driving frame saws in sawmill applications. The electric motor is suitable for professional use in sawmills and supports the operation of frame saw systems for woodworking. Itedezxzcuspfx Ag Asn Technical data: - Power: 75 kW - Pulley diameter: 330 mm - Pulley width: 220 mm

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Itjdpfx Agezqtb Te Aen

Condition: not inspected (used), functionality: unexamined, AEG Iedownpuajpfx Ag Ajtn Type: AM90LX4Q4 IMB14 For further data, see image of the type plate, device is untested.

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Maximum speed: 75m/ minute Complete with vacuum register station Calender diameter: 450mm with oil heated central Roll elevator Automatic separator Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Iedpfozt R Enjx Ag Aetn Automatic stacker

Year of construction: 2008, condition: good (used), ROTOFLEX VLI 330 Inspection – Slitting – Rewinding Machine Manufacturer: ROTOFLEX International Model: VLI 330 Year: 2008 Serial No.: VLI 3517 Working width class: 330 mm Electrical: 380 V / 50 Hz / 3 Phase Condition: Very good working condition Iedpfx Agezww Ikj Ajtn Current status: Still in production Availability: Approx. 3 months, after installation of the owner's new finishing line BRAND-NEW INSPECTION TECHNOLOGY BST TubeScan – Installed / Replaced in 2025 The machine is equipped with a modern: BST TubeScan Digital Strobe 4000 Inspection System The complete camera / inspection system was replaced in 2025 and is therefore almost new. This represents a considerable added value compared to many older Rotoflex machines currently available on the used machinery market. The system allows the operator to monitor the printed web during production and supports reliable quality control of finished labels. MACHINE APPLICATION The Rotoflex VLI 330 is designed for professional finishing and inspection of label material. Typical applications include: · Inspection of printed labels · Slitting of master rolls into finished rolls · Rewinding · Removal and correction of defective material · Quality control · Preparation of finished rolls for delivery · Processing of pressure-sensitive label materials · Paper and film label applications

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer Itjdjz Ibb Topfx Ag Aon 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Condition: used, Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 200 LZ2 -Power: 37 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Dimensions: 735/480/H410mm Itsdpfjt Dri Nox Ag Ajn -Weight: 288 kg

Condition: good (used), Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 280 MV4 Y4 Q4 -Power: 90 kW -Speed: 1480 rpm -Shaft: Ø 75 x 110 mm -Protection class: IP54 -Design: B3 Ijdsvw Si Tspfx Ag Ajtn -Quantity: 1 piece available -Price: per piece -Dimensions: 1050/560/H685 mm -Weight: 644 kg/pc.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Ijdpfsz Smqdjx Ag Aetn Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, rotational speed (max.): 10,000 rpm, shaft diameter: 12 mm, mount diameter: 10 mm, shaft length under head: 2,000 mm, space requirement height: 3,000 mm, 5 x Pferd Mammut – Electronic Suspension Motors: In stock at Kinket SSP B.V. These suspension motors offer an excellent solution for a variety of industrial applications, such as grinding, polishing, brushing, and milling. Features of 5 x Pferd Mammut – Electronic Suspension Motors: Infinitely Variable Speed Control: The Pferd suspension motors are equipped with infinitely variable speed control, from 100 to 10,000 rpm. This allows you to select the optimal speed that suits the specific tasks and materials you are working with. This gives you complete control over your machining processes. Iodpfx Agetvfnuj Ajtn Complete Package for Immediate Use: At Kinket SSP, we supply the used suspension motors including the necessary sliding contacts and a 12-meter-long VAHLE contact rail. Versatile: Whether you work in metalworking, woodworking, plastics processing, or other industries, these flexible shaft suspension motors offer versatility and performance that meet your requirements. Their proven track record in various applications makes them a reliable choice for a wide range of machining needs. Quality: The 5 flexible shaft machines are in excellent condition. Each machine has been carefully inspected. Summary: 5 x PFERD flexible shaft machines 5 x suspension brackets 5 x flexible shaft 12x2000mm 5 x straight handpiece 1 x 12-meter-long VAHLE contact rail These machines are fully comparable to the Suhner Rotomax suspension motors. Current new price approximately: €36,000 Selling price of this well-used set: €22,000 We also have several new and used flexible shaft machines available in stock (approximately 30 units) from the brands Suhner / Biax and Pferd. If you are interested in a mobile or stationary machine, that is also possible. In addition, we also have several used and new handpieces in stock. Belt sander / angled handpiece with collet or M14, etc. Please ask us about our current inventory.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 17271 - 17272, number of ink cartridges: 10, color channels: 10, number of print heads: 40, resolution (max.): 1,200 dpi, paper weight (min.): 28 g/m², paper weight (max.): 300 g/m², paper width (min.): 200 mm, paper width (max.): 540 mm, paper height (min.): 200 mm, paper height (max.): 100 mm, number of feeding trays: 1, total length: 12,000 mm, total width: 3,300 mm, total height: 2,400 mm, space requirement length: 18,000 mm, space requirement width: 5,000 mm, space requirement height: 3,500 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 150 A, input voltage: 400 V, Equipment: auto duplex, documentation/manual, raster image processor, Canon ProStream 1000 – High-Speed Full-Color Inkjet Web Press Canon ProStream 1000 digital inkjet web press in excellent working condition. The press has been in regular production until recently and is fully operational. It has been professionally maintained and can be inspected while running by appointment. Equipped with Canon ColorGrip technology, the press delivers outstanding print quality on both coated and uncoated offset papers, providing exceptional color consistency and productivity. Itedjzrmwdjpfx Ag Ajn Key Features Canon ProStream 1000 continuous-feed inkjet press Up to 80 m/min printing speed CMYK full-color duplex printing Canon ColorGrip system included Prints on coated and uncoated offset papers Excellent mechanical and cosmetic condition Well maintained throughout its service life Available for inspection Dismantling and loading assistance can be arranged upon request This is an excellent opportunity to acquire a high-performance production inkjet press with proven reliability and industrial productivity at a fraction of the cost of a new machine. Please contact us for further technical information, photographs, maintenance records, or to arrange an inspection.

Condition: ready for operation (used), Year of construction: 2016, overall weight: 10,500 kg, travel distance Y-axis: 400 mm, This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine. • Maximum force: 100 Ton • Working length: 3200 mm • Distance between uprights: 2550 mm • Throat depth: 500 mm • Distance between table and ram: 600 mm • Table width: 60 mm • Fast descent speed: 0–200 mm/s • Working speed: 0–10 mm/s • Return speed: 0–180 mm/s • Y-axis positioning tolerance: ±0.01 mm Itedsx D Hvkopfx Ag Asn • Motor power: 11 kW • Oil tank capacity: 120 L • Maximum working pressure: 250 bar • Electrical supply voltage: 400 V • Frequency: 50 Hz • Phases: 3 + N • Acoustic pressure at operator position: 74 ± 2.5 dB(A)

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm • Spindle bore: 115 mm; draw tube ID: 103 mm Itjdpfoz Eaz Tjx Ag Aon • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Iodpfx Aoy Hp Rrsg Astn Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, This listing is for a Heidolf Titramax 1000 Shaker/mixer The unit is in full working condition and is ready for immediate release The Heidolph Titramax 1000 is a platform shaker designed for laboratory use, featuring a vibrating motion with a speed range of 150 to 1,350 rpm and an orbit of 1.5 mm. It supports a maximum load of 5 kg and includes a timer function with a maximum duration of 120 minutes. The shaker is suitable for processing up to six microtiter plates and can be integrated into the modular incubation system for temperature-controlled processes. It operates within an ambient temperature range of 0 to 50°C at 80% relative humidity. Key Features of the Heidolph Titramax 1000: Shaking Orbit: 1.5 mm Speed Range: 150 to 1,350 rpm Timer Function: Up to 120 minutes Maximum Load Capacity: 5 kg Operating Mode: Timer or continuous Input Power: 31 W Dimensions: 320 mm (w) × 125 mm (h) × 375 mm (d) Platform Size: 290 mm × 258 mm Additional Features of the Largest Model (Titramax 1000): Iedpfexv D Hdjx Ag Astn Storage Capacity: Up to six multi-well plates, allowing for a higher number of samples to be processed. Modular Incubation System Integration: The Titramax 1000 can be integrated into the modular incubation system, enabling temperature-controlled processes to be carried out without issues. User-Friendly Design: Easy loading and removal of plates are facilitated by the recess and the spacings in the rubber mat, ensuring comfortable and efficient operation. The Titramax 1000 retains all the features of the Titramax 100, including the 1.5 mm shaking orbit, speeds up to 1350 rpm, and a timer function, making it a versatile and reliable choice for laboratory applications

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale are 10 GARANT ZeroClamp clamping devices, type 10012. The clamping devices are used, in good condition, and fully functional. New price per unit: €661.20 plus VAT. Available for sale individually or as a complete package. If you are interested or have any questions, please do not hesitate to contact us. Inspection possible by appointment. Shipping and inspection are possible! Product details Technical data Series: ZeroClamp Manufacturer's designation: ZeroClamp clamping device, type: 10012 Clamping device diameter: 120 mm Maximum clamping force: 25 kN Material: Steel Indexing hole available: no Product type: Clamping device Itedpsz E Rdfsfx Ag Aen Identification & Classification Article number: 360040 10012 EAN / GTIN: 4045197415820 Manufacturer's number: 360040 10012 Description Design: All components are made of stainless or corrosion-resistant steel. The zero-point clamping of the GARANT ZeroClamp system is an important function for modern manufacturing systems, especially in automated manufacturing. Thanks to a special contact interface, it guarantees precise and reliable zero-point repeatability. The pneumatic clamping force of the system holds workpieces securely in the desired position, allowing for quick and accurate workpiece changes without re-positioning. This reduces setup effort and increases productivity. The zero-point clamping of the GARANT ZeroClamp system is essential for efficient manufacturing processes. Learn more about the innovative technology of GARANT ZeroClamp and optimize your production. Application: For individual installation in clamping fixtures.

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake Itodergtd Hjpfx Ag Aen -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm -Dimensions: 525/240/H275 mm -Weight: 50 kg

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, WEINIG Rondamat 1000 CNC – High-precision knife grinding machine For sale is a used WEINIG Rondamat 1000 CNC, manufactured in 2016. The Rondamat 1000 CNC is a high-precision CNC knife grinding machine for fully automatic sharpening and manufacturing of profile knives, as well as for re-sharpening of straight planer knives and profile knives in the knife head. Technical data and equipment: * Manufacturer: WEINIG * Model: Rondamat 1000 CNC * Year of manufacture: 2016 * High-precision knife grinding machine * Automatic import of CNC programs from Moulder Master * Fully automatic sharpening and manufacturing of profile knives from a blank * Fully automatic re-sharpening of straight planer knives and profile knives in the knife head * Grinding of planer knives in the planer head with standard knife overhang possible Grinding unit: * Solid spindle carrier with precise guides * Roundness accuracy less than 0.005 mm * Motorized radial adjustment for different grinding wheel diameters * Back clearance angle fully automatically adjustable * Lateral clearance angle fully automatically adjustable * Grinding spindle with HSK mounting * HSK 50F * Grinding wheel diameter: 150–200 mm * Grinding wheel width (Borazon/Diamond): 2 / 3 / 4 / 10 mm * Grinding wheel bore: 60 mm * Grinding spindle drive: 1.5 kW (2 HP) * Grinding spindle speed: 1,500–3,000 rpm, frequency-controlled * Radial clearance angle grinding: 10–30° Iedpfx Asz Eypdjg Aetn * Lateral clearance angle: 0–20° Automatic equipment: * Automatic grinding wheel measurement using a mechanical measuring process * Automatic compensation for grinding wheel wear * Automatic tool changer * Grinding wheel magazine with 3 magazine slots * Coolant system * Automatic coolant cleaning via a transport filter system * Coolant tank approx. 70 liters * Coolant additive: 5 liters * Coolant pump: 210 W * LED light for the machine interior Tool holder: * System "PowerLock 360" * Suitable for grinding PowerLock tools and large-sized boring tools * Max. tool weight: 80 kg * Tool holder with manual HSK quick-change system * Interchangeable receiving spindle for right and left tools * Max. tool width: 360 mm * Max. tool circle diameter: 300 mm * Min. tool circle diameter: 90 mm * PowerLock adapter for conventional tools, shank diameter 50 mm * Additional dividing head * Additional PowerLock adapter for conventional tools 40 mm or 50 mm Electrical data: * Operating voltage: 400 V * Voltage range: 380–420 V * Frequency: 50 Hz * Total connected power: approx. 3 kW (4 HP) Operation and control: * Operation from the front * Graphical user interface * Connection to WEINIG Moulder Master * Management of grinding wheels * Management of CNC programs * Setting of machining parameters such as feed speed, depth of cut, and feed cycles * Setting of tool parameters such as number of cutting edges, tool diameter, and blank material * Display of the current machining progress * CNC program generation in conjunction with Moulder Master

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) Itedpfxjx H Ando Ag Asn dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!