Used Aluaufspanntisch Mounting Block for sale (12,271)

Condition: good (used), machine/vehicle number: 18287 + 88, Technical specifications: Ibodpfsd Aakrjx Abhob - Plate surface in good condition - Length: approx. 2000 mm - Width: approx. 600 mm - Height: approx. 270 mm - Plate thickness: 20 mm - Various holes, some with threads - Intermediate ribs between the top plate and the lower support surface - Weight per unit: approx. 100 kg

Condition: good (used), machine/vehicle number: 18285, Aluminum clamping table - clamping block Offer number: 18285 Manufacturer: xxxxx Type: xxxx Machine no.: 18285 Year of manufacture: xxxx Technical data: - Plate surface in good condition - Length approx. 1540 mm - Width approx. 1540 mm Ibedofhv I Ajpfx Abhob - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs. screw-on supports 50 x 20 mm - Various holes, some with threads - Intermediate supports between the top plate and the lower support surface - 4 attachment eyes - Weight approx. 180 kg

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: Iedpfx Ajxvr T Eobhebb - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: used, for milling chucks, spindle head, tool holder, tool carrier -Manufacturer:Diebold, assembly block for assembling and disassembling tool combinations -Arrangement: vertical and horizontal -Mounting: SK40 Iedpowvfrwjfx Abhobb -Dimensions: 275/160/H180 mm -Weight: 10.5 kg

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Ibedpfoz Alpmex Abhob Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Condition: new, color: red, driver cabin: other, gearing type: other, Vehicle location: en route/in transit, emergency stop, foldable, radio remote control Superstructure: Fassi F 110 B 2.22 Dynamic, at 7.8 m – 980 kg, radio-controlled load chart, max. 5,400 kg, at 4 m – 2,200 kg, 7.8 m – 980 kg, new crane from year of manufacture 2022, additional hydraulics only for swivel servo, the crane is intended for stationary mounting, swivel range 410°, all hydraulic cylinders are double-acting, piston rods are hard-chrome plated, double-knee lever system with PROLINK (overextending boom arm up to 15°), electronic overload cut-off device with FX500, emergency stop, and optical alarm (90% and 100%), pressure relief and load holding valves, control block with 4 control valves, operable from both sides separate hydraulic tank (90 l) with filter, mounted on the crane base, standard color RAL 3020 traffic red, load hook and fastening lugs (short / 500 mm), data subject to change as the crane is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Ibodpfx Aezv Spaebhsb

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. Ibedpfx Aboxp Uursheb What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, machine/vehicle number: 42412110002654, mileage: 288,139 km, power: 70 kW (95.17 HP), first registration: 01/1980, empty load weight: 5,850 kg, overall weight: 6,800 kg, Year of construction: 1980, operating hours: 7,215 h, Equipment: crane, For sale: Used UNIMOG 1000 with Atlas AK1402 loading crane • Internal number: i. K. • First registration: 01/1980 • Mileage: approx. 288,139 km • Operating hours: approx. 7,215 • Power: 70 kW / 95 hp • Unladen weight: 5,850 kg • Permissible total weight: 6,800 kg • Trailer load: braked 22,000 kg, unbraked 1,500 kg • Additional headlights • Exhaust pipe pointing upwards Isdsz Aqykspfx Abhsbb • 12 V electrical system • Auxiliary gearbox with working group • Auxiliary drive at the bottom • Vehicle plate • Flatbed: L: 148 cm x W: 190 cm x H: 40 cm Atlas AK1402 loading crane 1 hydraulic extension Load capacities: 3.9 m – 1,030 kg 5.2 m – 770 kg This offer is subject to change. Errors and prior sale are reserved.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Ijdpfxexpi T Ao Abhsbb Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: D510447, Year of construction: 2004, operating hours: 4,505 h, load capacity: 3,000 kg, lifting height: 3,540 mm, construction height: 2,800 mm, fork length: 1,140 mm, overall weight: 3,020 kg, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 3,540 mm Fork length: 1,140 mm Minimum fork width: 210 mm Maximum fork width: 1,160 mm Number of wheels: 3 MACHINE DETAILS Mast type: Duplex Fuel type: Diesel Engine manufacturer: Kubota Operating hours: 4,505 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,460 x 2,800 mm Unladen weight: 3,020 kg EQUIPMENT Side shift Partial cabin Pneumatic tires Work lights Documentation Operator's manual CE marking Ibjdpfxezza S To Abhob

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: L060374 / L060354, Year of construction: 2012, operating hours: 16,811,455 h, load capacity: 2,250 kg, fuel type: diesel, gearing type: hydrostat, DGUV certified until: 07/2027, Equipment: 3rd hydraulic function, CE marking, UVV, full service history, head guard, pallet forks, We are selling two Moffett piggyback forklifts, model year 2012. Both forklifts are in good condition and have been regularly maintained and inspected according to occupational safety regulations. The forklifts are fully functional and can be inspected and tested by appointment. Ibodpfx Asz Anurobheb

Condition: used, mileage: 440,000 km, power: 221 kW (300.48 HP), first registration: 12/2013, fuel type: diesel, overall weight: 15,100 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro5, loading space length: 6,669 mm, Year of construction: 2013, Equipment: air conditioning, crane, electronic stability program (ESP), soot filter, Manufacturer Iveco Model EuroCargo 160E30 Fassi F110 / Glaslad Year 2013 Condition Good Serial Number ZCFA1MM1402615421 Ref. nr. 268195 Reg. date: 20-12-2013 Hk: 300 Km: 440000 Gearbox: automatic Eurotype: 5 EEV (partikelfilter) Diesel tank: 1 Tank liter: 400 L Air conditioning: ? Ibodpfsz Ddpxox Abhjb Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 305/70R19,5 - 435/50R19,5 Cover% left 10% 40% Front suspension: Springs Suspension rear: Air Wheelbase: 5670 mm Toolbox: ? Hydraulic system: ? Total weight: 15100 Kg Net weight: 9100 Kg Load capacity 6000 Kg Crane Manufacturer: Fassi F110B.0.24 E-Active Tonsmeter: 11 Remote control: ? Year: 2013 Extension extension (hydraulic): 4 Deferral extension (manual): 1 Max range (hydraulic): 11,80 m Max range (manual): 13,90 m

Condition: used, mileage: 14,215 km, power: 81 kW (110.13 HP), first registration: 05/1980, fuel type: diesel, overall weight: 6,500 kg, gearing type: mechanical, number of seats: 2, Year of construction: 1980, Equipment: all wheel drive, crane, Very well-maintained Unimog U1100 from first owner. Equipped with an Atlas AK 3006 A crane featuring 1x hydraulic extension, a maximum working height of 10 meters, and 5th & 6th hydraulic functions (e.g. for grab or bucket). The vehicle has only 14,215 km and 839 operating hours. Collector’s condition. * Atlas AK 3006 A * 3,300 kg at 2.93 m * 1,620 kg at 4.77 m * 1,200 kg at 6.07 m * Optional: 3x mechanical extensions * 980 kg at 7.42 m * 730 kg at 8.73 m * 520 kg at 10.04 m * Working height: 10 m * Additional control circuit on crane (e.g. for rotator or grab) * 4-point outriggers * Remote control * Front hydraulics (e.g. for snow plow) * Selectable all-wheel drive with differential locks Ibsdpfxezdcvzj Abhob * 2x trailer hitches * Reversible gearbox with 8 forward + 4 reverse gears * Air-suspended driver’s seat * Engine: OM 352, 6-cylinder, 5,638 cm³, 81 kW * Registration as self-propelled work machine possible * Odometer: 14,215 km * Operating hours: 839 * Vehicle is from first owner Financing available through our partner banks, we are happy to assist you. Please note: Intermediate sale reserved, as this item is also advertised on other platforms. Accessories information without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend viewing and inspection to ensure buyers have a correct impression of the vehicle’s condition and suitability. Inspections and test drives are possible anytime by appointment and are expressly desired.

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, Type : OPK 5800 -h / OBC5800 = same machine Min - Max lenght : 800 - 5800 mm, with infeed system. Thikness : 75 - 100 mm Width : 75 - 150 mm Speed : Block lenght 75 mm = 45 blocks / min Ibedpfx Abozz Hunjhsb Engine size : 7,5 Kw Electric cabinet with PLC touch screen. For Pallet blocks or similar. Only 30 operating hours, like new all over.

Condition: used, mileage: 1,001 km, first registration: 01/2007, empty load weight: 225 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 2007, load capacity: 2,000 kg, Vehicle location: Bovenden Iodpjz A H Nljfx Abhjbb Includes Kinshofer rotating head and upper carriage! Hydraulic counterbalance! Usable height approx. 1,050mm - 1,650mm! ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction: * Flatbed with aluminum side boards, * Dimensions i.L. 6,280mm x 2,480mm x 490mm, * Raised front wall, * Storage box, * Anchor rails in the flatbed floor, Crane: Fassi F 660 AXP.25 loading crane from 2007, * Radio remote control, * 4-point outrigger system, Crane reach/lifting capacity: Hydraulic: 3.40 m = 16,000 kg * 4.30 m = 13,095 kg * 5.95 m = 9,500 kg * 7.70 m = 6,980 kg * 9.65 m = 5,440 kg * 11.70 m = 4,375 kg * 13.85 m = 3,640 kg * 16.10 m = 3,100 kg Equipment: Cab: L (long), * Telligent transmission with clutch pedal, * Air conditioning + auxiliary air conditioning, * Auxiliary heater, * Additional thermal insulation, * Air horns on the cab roof, * Fuel tank: 590 liters, aluminum, * Driver/co-driver seat, sprung comfort seat including horizontal suspension, * Sun visor, Iedszlvnfspfx Abhobb Technology: Audio system: Radio Truckline CD 70, * Hands-free telephone system, * Multifunction steering wheel, * Electrically adjustable and heated exterior mirrors, * Central locking with remote control, * Cruise control, * CB radio, * Extendable cooler box, * Acoustic reversing warning (external warning signal), * Circuit breaker, * Rotating beacon, left/right, Safety & Environment: Retarder Voith, * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Emission standard EURO 5, Other: German initial registration, * 1 previous owner, 1 driver * Axle configuration: 6x4 + hydraulically steered rear axle, * Engine 16.0 L - 375 kW V8 diesel (OM 502 LA), * Wheelbase 4500 mm, * Payload 6,675 kg according to ZLB * Permissible total weight 32.0 t Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim at the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We are interested in taking your commercial vehicle/construction machine in trade. If a new TÜV (German vehicle inspection) is desired, we will be happy to provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: good (used), functionality: fully functional, mileage: 186,465 km, first registration: 03/2007, fuel type: diesel, overall weight: 48,000 kg, tire condition: 80 %, axle configuration: 8x8, fuel: diesel, color: orange, Year of construction: 2007, operating hours: 23,373 h, Equipment: crane, truck registration, 🔧 Key Specifications Manufacturer: Tadano Faun Model: ATF 65G-4 Year of manufacture: 2007 Type: All-terrain mobile crane Max. lifting capacity: 65 t Axles / Drive: 4 axles, 8×8 Main boom: 11.0 – 44.0 m Jib: Swing-away jib 9.0 m / 16.0 m (depending on configuration) Max. lifting height: up to approx. 60 m (depending on configuration) Slewing range: 360° Outriggers: Fully hydraulic Engine: Mercedes-Benz diesel Transmission: Automatic (ZF) Gross vehicle weight (GVW): approx. 48,000 kg Country of manufacture: Germany CE certified: Yes Iodpsycwfzsfx Abhebb ⏱ Hours & Mileage Chassis mileage: 186,465 km Superstructure hours: 23,373 h ⚙️ Condition Tadano Faun ATF 65G-4 all-terrain mobile crane in good working condition. The crane is fully operational and ready for immediate use. Normal signs of use consistent with mileage and operating hours. 📝 Description 65-ton all-terrain mobile crane with robust 4-axle 8×8 configuration, suitable for demanding lifting operations both on-road and off-road. Equipped with a telescopic main boom up to 44 m and swing-away jib options of 9.0 m and 16.0 m, providing excellent reach and operational flexibility. The crane is fitted with a load moment indicator (LMI), fully hydraulic outriggers, and a comfortable operator cabin with integrated monitoring and safety systems. 📍 Location & Delivery Current location: Bucharest, Romania Delivery: Worldwide delivery available upon request

Condition: used, mileage: 50,324 km, power: 235 kW (319.51 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, ????? ONLY COMPLETE ????? ?????ONLY COMPLETE????? Vehicle No.: 254-26 Mercedes Benz 2632 Actros MP3 6x4 MULTISYSTEM: ROLL-OFF DUMP BED / CRANE / WINTER SERVICE SALT SPREADER Mounting plate SCHMIDT with hydraulic connections Ibodpoz Dcr Sofx Abhjb * First registration: 08/2013 * Original mileage 50,324 km * Wheelbase 4,500 mm * Front axle leaf spring suspension * Rear axle air suspension * Tire condition approx. 50-70% * EURO 5 - AdBlue * Reversing camera * Blind spot camera * Automatic transmission * German vehicle Roll-off dump bed: MEILLER RK 2067, built in 2013, max 20,000 kg, 300 bar CRANE / Roll-off container: MGK Type HLK 95a3, year of manufacture 2003, max 9.18 m = 960 kg / at 2.20 m = 4,200 kg Salt spreader / roll-off frame: KÜPPER WEISSER, Type IMSSF E35050DFA, year of manufacture 2015, KUBOTA engine Cover plate for brake discs, axle load front axle 9.0 t, battery 220 Ah, additional compressed air tank, electromagnetic viscous clutch for fan, noise reduction S-package for city use, urea tank (AdBlue): 95 liters, rear axle H 7, 13 t, bevel gear 300, fuel tank: 400 liters, air compressor 2-cylinder, fan high-speed belt drive, auxiliary drive MB 2C, programmable special module, pipe breakage protection brake system, rotating beacon left / right, reversing warning audible (warning signal outside), rear window, circuit breaker, seats in the cab: driver's seat sprung comfort seat, sun visor, cab socket 24V, oil cooler transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer coupling: towing coupling, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, roof hatch (steel), differential lock rear axle, cab: suspension for bad roads (6.0 Hz), cab: M (medium length), generator 80 A, interior filter: pollen filter, body / superstructure: chassis, model revision from 06/2008, engine 12.0 L - 235 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, disc brake front axle, disc brake rear axle, steel rims 9.00x22.5, Telligent - gear shifting, underrun protection front, preparation CB radio, preparation telephone / fax, front axle angled, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 26.0 t Inspection possible during our opening hours at any time, test drive by appointment! In the case of export sales, a deposit will be retained, which will be refunded after receipt of the certificate of conformity. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - Errors, changes, typing errors and prior sale reserved. Vehicle descriptions are explicitly not guaranteed properties. We refer to our general terms and conditions and ask that you take note of them.

Condition: used, first registration: 06/2021, total width: 25,500 mm, Equipment: crane,

Condition: used, mileage: 168,000 km, power: 353 kW (479.95 HP), first registration: 12/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, loading space length: 5,300 mm, loading space width: 2,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Int. No.: 214 Very well-maintained MAN TGS 35.480 8x4 with a powerful EFFER crane * MAN * TGS 35.480, year of manufacture 2015 * 8x4 * Tridem axle, steerable Ibodpoz Dc T Ajfx Abhob * Leaf spring suspension with air suspension * Permissible weight 32,000 kg (technically 35,000 kg) * Tipper, 2-sided, Hardox steel * CRANE EFFER 395 H6S+JIB, year of manufacture 2020 * Hook height approx. 32m * REMOTE CONTROL for CRANE * 6x hydraulic extensions + 4x hydraulic JIB + manual * Grapple available at extra cost * 5th/6th hydraulic circuit to the end of the JIB * Differential lock * Central locking * RETARDER * STANDING HEATER * 2-seater * Radio * AIR CONDITIONING * Tires: approx. A: 70% B: 80% C: 45% D: 80% * Tow hitch 40,000 kg * Very good condition * First owner * VAT can be shown!!! Trade-ins possible Financing available from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typing and data transmission errors. The listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany available upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, working width: 300 mm, working length: 3,000 mm, Block press / Stationary press for multi-layer parquet Manufacturer: Soest Type: T 80 Hydraulic cold press, previously used for pressing multi-layer parquet (top layer, core layer, and counter layer) Iodpjzzmv Esfx Abhsbb Year of manufacture: 2017 (CE marking) Press width: approx. 300 mm Press length: approx. 3000 mm 4 press cylinders, diameter approx. 80 mm Pressing force: 80 t, equivalent to approx. 9.2 kg/m2 Total connected load: approx. 3.5 kW Dimensions: approx. 4200 x 980 x 2150 mm (L x W x H) Weight: approx. 3300 kg

Condition: used, Year of construction: 1998, operating hours: 60,000 h, functionality: fully functional, overall weight: 9,000 kg, Combined heat and power plant with generator. Manufacturer: GE-Jenbacher Type: JMS 312-GS-B.L Year of manufacture: 1998 Operating hours: approx. 60,000 hours Rated output: 495 kVA / 526 kW electrical Weight: 9,000 kg The unit operated in our facility until recently and was in perfect condition, running smoothly and cleanly. It was regularly serviced by a specialist company. Purchase price (net): €30,000 (negotiable) plus applicable VAT. VAT will be shown separately on our invoice. Iodpfx Ajzwb E Tobhjbb Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing options available If desired, we can arrange suitable financing through our company. Please contact us. Subject to changes, errors and prior sale. Sale is without guarantee or warranty and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: black, driver cabin: other, gearing type: other, Year of construction: 1999, Vehicle location: Bovenden Ibjdpfxszzbg Es Abhob Superstructure: Grabber, payload 300 kg, grabber width 470 mm, depth 700 mm Load capacity: 4,000 kg 320 bar ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Ibsdszxgglspfx Abhjb Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, mileage: 1,001 km, first registration: 01/1999, empty load weight: 295 kg, color: green, driver cabin: other, gearing type: other, Year of construction: 1999, Vehicle location: Bovenden Stone grapple Kinshofer KM 613 - 0.40, year of manufacture 1999 Ibjdozzbgxjpfx Abhjb Load capacity 0.4 m³, max. 200 bar. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!