Used Alvmac Mc Dynamic 25S for sale (9,918)

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, Automatic wheel banding machine. Bsdezhtb Iopfx Ahmjln

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H Bedpew S Ii Nsfx Ahmoln

Condition: new, total length: 2,910 mm, Year of construction: 2025, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - USB- Anschluss - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung Bjdpfxexpx Rwo Ahmoln - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° - Elektromotor 3 kW - 24 V AC, Isolationsklasse - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Travel in X-axis: 240 mm Bedpjz Ahybefx Ahmjln Travel in Z-axis: 640 mm Turning length: 730 mm Turning diameter: 400 mm Spindle speed: 4,000 rpm Spindle bore: 66 mm MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Tailstock Parts catcher

Condition: used, total length: 2,750 mm, Year of construction: 2023, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - USB- Anschluss - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” Blsdpfjztglwox Ahmjn - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° - Elektromotor 3 kW - 24 V AC, Isolationsklasse - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen

Condition: used, total length: 2,910 mm, Year of construction: 2023, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° - Elektromotor 3 kW - 24 V AC, Isolationsklasse Bledpfoztgfwox Ahmsn - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Blodpfxey Efbkj Ahmsn

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Bjdpfxjy Ed S Is Ahmeln Hörbiger laser gas system 2 CCD cameras Teka extraction unit ECO-Cube

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table Blodpfex Hn D Rsx Ahmon - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 550 h, load capacity: 3,000 kg, lifting height: 4,740 mm, free lift: 1,680 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,085 mm, drive type: Diesel, construction width: 1,450 mm, Rough terrain forklift Bodpfx Aoz Hf N Eehmeln Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Like new Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Description: With the MC30, available with two-wheel or four-wheel drive, you can safely and precisely load cargo on any terrain. The 30 cm ground clearance guarantees excellent climbing ability in your fields. Good all-around visibility and the compact and robust design ensure optimal safety during work. Discover the MC30, your new partner for increased productivity! This Manitou rough terrain forklift is also available in the two-wheel or four-wheel drive versions as MC 25-2 or MC25-4 or MC 30-2 or MC 30-4. Side shifter, 3rd valve, 4th valve, full cab, Cab, heater, trailer hitch, rotating beacon, work lights, mirrors

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,500 h, load capacity: 1,800 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 2,000 mm, power: 26 kW (35.35 HP), fork length: 1,200 mm, empty load weight: 3,562 kg, total length: 2,950 mm, drive type: Diesel, construction width: 1,450 mm, Rough terrain forklift Load center: 500 Bledpfez Elulox Ahmjn ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: Normal Front tire type: Pneumatic Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire condition: 60 - 80% Description: With the MC18, available with either two-wheel or four-wheel drive, you can safely and precisely load cargo on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimal safety during work. Discover the MC18, your new partner for increased productivity! This Manitou rough terrain forklift is also available in the two-wheel or four-wheel drive versions as MC 25-2 or MC25-4 or MC 30-2 or MC 30-4. Roof protection, windshield

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° Blodpfx Ajvzhiqohmen x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control Bledpfoygx Hnjx Ahmjn - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 2017, functionality: fully functional, X-axis (planar travel): 195 mm (approx. 7.67 inches) Z-axis (longitudinal travel): 400–430 mm Tailstock travel / quill travel: 100 mm (quill stroke) Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min C-axis (spindle indexing): 0.001° (for driven tools / MC version) Center height: 1,000 mm Max. spindle speed: 3,500 rpm Max. chuck diameter: 10 inches Max. chuck speed: 4,200 rpm Max. working area (diameter x length): Ø 325 mm x 302 mm Machine weight: 4,350 kg Operating voltage: 3 PE / 220 V (AC) Rated frequency: 50 Hz Bedpfxsz Hwais Ahmoln Electrical connections / power: 30 kVA Rated current: 100 A Short-circuit current strength: 5 kA Largest motor: 80 A Circuit breaker capacity: 100 A Switching capacity of protective device: 50 kA Compressed air supply: 0.5 MPa (5 bar)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max. turning diameter. 400 mm Turning length. 650 mm Circumferential diameter. 600 mm X-axis travel. 275 mm Z-axis travel. 700 mm Bar capacity. 85 mm Main spindle. 3,400 rpm for 85 mm bore Spindle nose. A8 / DIN A8 Chuck Driven tools. MC = Milling/driven tools Control system. Siemens Bljdpfsz Hyy Eex Ahmsn 16-station BMT45 turret, axial - all stations driven Chip conveyor in the tailstock High-pressure pump, 15 bar Siemens Sinumerik One Measuring probe for tool measurement in the work area Direct measuring system in the X-axis Automatic door

Condition: repair required (used), Year of construction: 1998, operating hours: 6,000 h, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 221 mm, total length: 2,500 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,750 kg, Equipment: documentation/manual, We are offering this Spinner TC46-MC CNC lathe, manufactured in 1998, which requires repairs. The turret needs to be overhauled. The machine is powered on. Otherwise, it has no other defects. Serial number: 040235 Type: TC46-MC Voltage: 3 × 400 V Current: 50 A Frequency: 50/60 Hz Bljdpsz Ekq Eofx Ahmsn We will gladly load the machine onto a truck for the customer using a forklift. If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), CATALOGUE NUMBER: 7153 TECHNICAL DATA - Hydraulic pressing force - Briquette shape: round - Briquette diameter: 70mm - Hopper dimensions (height/width): 920x870mm - Output: approximately 110kg/h - Automatic machine operation - Oil cooler - Oil heating - Inspection window - Motor: 7.5kW - Dimensions (length/width/height): 1750x1300x1460mm - Weight: 825kg Bodpfxjzxqxrj Ahmjln ADVANTAGES - Unpainted - Made in Italy - Used briquetting machine - Very good condition Net price: 38,900 PLN Net price: 9,047 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Bsdpfx Aoz Ep Dkohmeln

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours. Bledpfx Aszti Tkehmjn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, EMCO EMCOMAT FB-450 MC | DEMO | Sinumerik 828D | Warranty Description EMCO EMCOMAT FB-450 MC – DEMO machine in like-new condition Bsdpfxjz Dib Tj Ahmoln Universal CNC toolroom milling machine equipped with a SIEMENS Sinumerik 828D control. The machine was manufactured in 2019 and has never been used in production. It was used solely as a demonstration machine and has very low operating hours. The machine is in excellent, near-new condition and is offered with extensive accessories included in the price. 6-month warranty on spare parts included. The EMCOMAT FB-450 MC is a highly versatile machine suitable for toolrooms, prototype production, maintenance departments, and precise single-part or small-batch production. It allows both vertical and horizontal milling. Technical specifications Working area X-axis travel: 450 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle center distance: 40–440 mm Rapid traverse X/Y/Z: 5,000 mm/min Working feed X/Y/Z: 10–5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Table Clamping surface: 800 × 400 mm Maximum table load: 300 kg Spindle Spindle speed: 10–5,000 rpm Spindle power: 10 kW Tool interface: ISO 40 Machine CNC control: SIEMENS Sinumerik 828D Dimensions (L × W × H): 1,980 × 2,030 × 1,990 mm Machine weight: approx. 2,270 kg Year of manufacture: 2019 Included equipment SIEMENS Sinumerik 828D CNC control Electronic handwheel Rotary table/turntable for vice Support arm for horizontal milling Installation rubber pads Side storage holders for 27 milling tools Set of 12 ISO 40 milling tool holders, including holders for horizontal milling Machine manual 6-month warranty on spare parts Condition DEMO / LIKE NEW The machine has never been used in regular production and was operated only for demonstration purposes. Machine can be inspected and demonstrated under power by prior appointment. Available for delivery.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Bljdpfxez Dgw So Ahmsn

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer Bljdpfx Ael Dvtkehmjn -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC -Platform: Length 2750 mm, dimensions see photos / technical drawing -Load capacity: 1200 kg -Maximum speed: 25 km/h -Number: 2 trailers available -Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

Year of construction: 2019, operating hours: 253 h, condition: used, functionality: fully functional, empty load weight: 20,200 kg, fuel type: electric, total length: 5,400 mm, lifting height: 13,000 mm, mast type: simplex, construction height: 2,000 mm, drive type: Elektro, load capacity: 16,000 kg, construction width: 2,070 mm, Other Mast type: Standard Bedpfxoz Aly Es Ahmsln Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Hydraulically adjustable boom + 60°/-9°, Non-marking tires with tread, Charger internally installed, Battery with water filling system, Mobile head (new mobile head), Radio remote control for all crane movements, 2 cameras (front right and rear center), Distributed counterweights (removable with pallet truck), Aluminum protective boom tip 11 t, Aluminum boom extensions 7 t, Operator cabin with door, Warning light, Fire extinguisher

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 280 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 3,562 kg, total length: 2,950 mm, drive type: Diesel, construction width: 1,450 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: Very good Bedpsyf Rvrofx Ahmsln Front tires type: Pneumatic Front tires size: SOLIDEAL - SL-R4 - 12.5/80 R18 PR12 Rear tires type: Pneumatic Rear tires size: CAMSO - ED PLUS - 7.00-12 R12 PR12 Description: With the MC25, available in two-wheel or four-wheel drive versions, you can safely and precisely handle loads on any terrain. Its 30 cm ground clearance ensures excellent climbing ability on your fields. The machine's good all-round visibility, along with its compact and robust design, ensure optimum safety at work. Discover the MC25 – your new partner for increased productivity! This Manitou rough-terrain forklift is available with two-wheel or four-wheel drive technology, also in the MC 25-2, MC 25-4, MC 30-2, or MC 30-4 models. Side shifter, 3rd valve, 4th valve, heater, full cabin, full free lift, interior mirror, joystick, beacon,

Condition: used, Year of construction: 1989, functionality: fully functional, overall weight: 5,000 kg, We offer this used Mazak ST 35 ATC MC CNC turning and milling center, manufactured in 1989. CNC lathe, brand MAZAK, model ST 35, manufactured in 1989, self-weight of 5 tons, equipped with a MAZATROL model T32-3 control, a KITAGAWA brand chuck, model B-12A0815 with a maximum pressure of 327 PSI, a KITAGAWA brand hydraulic cylinder, model F2078HS15A with a maximum speed of 3,000 rpm, as well as an automatic chip removal system, all accompanied by various manuals. Voltage: 220 V Frequency: 60 Hz Spindle power (rated): 26 hp Spindle power (continuous): 30 hp Machine serial number: 83298 Electrical diagram number: 112AAWA Main motor current: 102 A Full load current: 44 A Bedpoz A Incefx Ahmjln Main switch current: 13/10 A Model: ST 35 ATC MC Serial number: 83496 Date of manufacture: June 1989 Weight: 5000 kg If you have any questions or need more information, please do not hesitate to send us a message or call us.