Used Amr Press Device Tm1600 for sale (24,078)

Condition: new, mechanically adjustable Nwjdpfx Ae Adfvmsi Ten

Condition: new, Bundle your wood like the professionals. Thanks to its easy operation and practical features, working with the bundling device is straightforward, saves time, and is also extremely economical. The mechanical tilting mechanism on the device ensures ergonomic working conditions. • Suitable for 1,000 mm wood length • For 1/2 cord of wood • Incl. mechanical clamping device for bundling rope • Can also be used with strapping • Easy tilting of the finished bundle (mechanical) • Basket diameter 800 mm • Three-point linkage, Cat. I and II • Ergonomic working height Nwjdpfe Adgmtex Ai Tjn • Robust and durable

Condition: new, - Mechanically tiltable to the left/right - Incl. 3-point hitch - Suitable for wood lengths of 33 cm, 50 cm, and 100 cm - Hand winch for mechanical tensioning of the cable (bundling with strapping is also possible) - Two cable baskets for cable storage - Basket diameter 120 cm - Ergonomic working height Nwodpfx Ae Adglpei Tsn - Robust and durable - Retrofitting with the options of Euro hitch, hydraulic tilting, and mechanical/hydraulic pre-tensioning is easily possible

Condition: used, Press-fitting device for ceramic pins in rotor shafts Operating principle: The ceramic pins are fed to a testing station via a vibrating feeder and a pneumatic hose, where the position of any existing one-sided bore is checked. This is done using an optical sensor. Incorrectly positioned parts are conveyed to a collection container by a pneumatic slide. Correctly positioned pins are fed to the singulator of the press-fitting tool via another pneumatic hose. The actual press-fitting process is also carried out pneumatically with a roller bearing-guided plunger. First, a manually adjustable pressure p1 is used to ensure that the pin is not pressed too easily into the shaft. Then, with another manually adjustable pressure p2, the pin is pressed fully into the rotor shaft. A disk spring pack preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted, removed, and clamped into the tool by an operator. This process is secured by a light curtain. Design Self-supporting station, integrated into a complete system, for press-fitting ceramic pins and balls. Rotor shafts Diameter: 5 - 20 mm Length: 50 - 200 mm Ceramic pin Diameter: 3 mm Length: 5 +/- 0.2 mm Operating cycle Performance: 15 cycles per minute Safety Protective door with safety switch Light curtain, category 4 Emergency stop Airborne noise emission Continuous sound pressure level at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Nedpfxsib H U De Ai Tewn Frequency: 50 Hz Fuse: 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of manufacture: 2003 Electrically adjustable work table Documentation and circuit diagrams are available. More press-fitting devices – new and used – can be found in our shop! International shipping costs available on request!

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Nwedjvkn Nvepfx Ai Tsn

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 540 kg Price: On request Nsdpfxsz U U Dpj Ai Tjwn - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nodo Aacybopfx Ai Tjwn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor Nwodpfsxzg I Iox Ai Tsn The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. Nwedjz Rvywspfx Ai Tsn The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Design workshop / toolroom

Condition: new, Description The AMR oscillating circular saw WSA-700P offers numerous practical features for efficient operation. Equipped with a powerful PTO drive via V-belt and a standard carbide-tipped saw blade with a diameter of 700 mm, it enables a cutting depth of approximately 240 mm. The high-quality powder coating ensures durability, while the stable, reinforced oscillating arm and the oscillating arm locking mechanism provide additional safety. An emergency stop lever ensures quick shutdown with PTO drive. The chassis with a 3rd wheel, sliding rod, and rollable handle ensures easy handling. A sprung timber hold-down and an adjustable length indicator complete the functionality. The protective cover complies with EN standard 1870-6, and the device is EC type-approved. - Chassis with 3rd wheel and sliding rod - Carbide-tipped saw blade Ø 700 mm, standard - Cutting depth approx. 240 mm - High-quality powder coating - Oscillating arm locking mechanism - Emergency stop lever for PTO drive - PTO connection height approx. 62 cm - Protective cover according to EN standard 1870-6 Nwjdpfx Ao Adi Utei Ton - Adjustable length indicator, standard - Roll handle for easier operation - Sprung timber hold-down - Stable, reinforced oscillating arm - EC type-approved - Robust and durable Cutting depth (cm): approx. 24 Drive: PTO drive with V-belt Saw blade carbide-tipped Ø700/30 mm, 42 teeth: standard

Condition: used, Year of construction: 2024, Fluke DSX 8000 in good condition. Njdez I Sxpspfx Ai Town

Condition: used,  Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Baujahr / Year 2016 - Serial-No. 1224446842 Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Presskraft / Pressing force 12.000N Nodpsyldg Rofx Ai Town Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 0000071163, Type: ALPHA20 HOR Equipment / Additional information: Nsdpfxsunv Rxo Ai Tjwn With tank Refix DE (Fabr. No.: 15 P 0316 90633)

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition Nwsdpszinzlefx Ai Tsn

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) Nwedpfx Aefdkb Eji Ten FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Nodpfx Aioy Ra Ddo Tewn Weight: 28 kg

Condition: new, Description The AMR forestry grapple with claw URFBD is a powerful device for efficiently collecting branches. With a maximum opening width of 106 cm and a robust construction made of two sturdy tubes, it offers high durability. The interchangeable teeth on the claw ensure flexible use and easy maintenance. In addition, a foot allows the machine to be positioned vertically, which facilitates handling. The bolted EURO standard attachment enables versatile use, while other attachments are available upon request. Nedpfx As Adiw Usi Town - Grapple for collecting branches - Construction made of two robust tubes - Interchangeable teeth - Foot for positioning the machine in a vertical position - Max. opening: 106 cm - Bolted EURO standard attachment (standard) Other attachments available upon request!

Condition: new, Description The AMR EKO E + Scie debarking machine is a versatile and powerful device specifically designed for processing small-diameter timber. With its continuously variable processing range from Ø 40 to 250 mm, it enables debarking, pointing, and beveling of the wood in a single operation. This results in higher-quality debarked wood with excellent storage stability. The machine impresses with its durable quality, based on high-quality materials, as well as a pointing device and a powerful fan with a pipe bend of Ø 160 mm. The simple discharge flap and the two support stands ensure user-friendly operation. In addition, the machine is equipped with a circular saw, which further enhances its functionality. Nwjdpfxs Adgg Hs Ai Tjn - Enhance the value of small-diameter timber - continuously variable from Ø 40 - 250 mm - Debark, point, and bevel with a single machine - Debarked wood is of higher quality and has excellent and long-lasting storage stability - Universally applicable via PTO shaft or electric motor - Durable quality due to high-quality materials - Pointing device - Fan with pipe bend Ø 160 mm - Simple discharge flap - 2 support stands - Incl. circular saw Drive: Electric motor 400 V/11 kW Debarking knives: 4 Saw blade wood diameter: approx. 170 mm Wood length: 1,500-3,000 mm Wood diameter for pointing: 40-150 mm Wood diameter for debarking: 40-250 mm Maximum speed: 2,400 rpm Feed knives: 2 Circular saw blade, carbide: Ø 500/30

Condition: new, Description The AMR EKO P debarking machine with a pointing device and PTO drive enables the efficient upgrading of low-quality wood with diameters of Ø 40 to 250 mm. With this machine, debarking, pointing, and beveling can be performed in a single step. The debarked wood is characterized by its high quality and excellent long-term storage capability. Thanks to the use of high-quality materials, the machine guarantees durable quality. It features a straightforward three-point linkage system for categories I and II, as well as a practical pointing device. The blower with a pipe bend of Ø 160 mm ensures effective chip removal. A simple discharge flap and two support brackets complete the equipment and facilitate handling. - Upgrade low-quality wood – continuously adjustable from Ø 40 to 250 mm - Debarking, pointing, and beveling with a single machine - Debarked wood is of higher quality and has very good and long-term storage capability - Universally applicable via PTO or electric motor - Durable quality due to high-quality materials - Three-point linkage Cat. I and II on EKO P Nedo Adgggjpfx Ai Tswn - Pointing device - Blower with pipe bend Ø 160 mm - Simple discharge flap - 2 support brackets Feed knives: 2 Drive with tractor: from 25 HP Width in transport position: 1,074 mm Wood length: 1,500 - 3,000 mm Wood diameter for pointing: 40 - 150 mm Debarking knives: 4 Width in working position: 2,366 mm Wood diameter for sawing: approx. 170 mm Wood diameter for debarking: 40 - 250 mm Maximum speed: 2400 rpm Dimensions (L x H): 1,328 x 1,966 mm

Condition: excellent (used), Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar Nedpfx Aijiraxuo Tjwn -Limit signaller: Type M1 -Screw connection: see photos -Dimension: 170/135/H135 mm -Weight: 2.1 kg

Condition: used, Hydraulic machine vise, high-pressure clamping device KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guide rail height: 140 mm - 2 clamping ranges adjustable via pins - Rotating plate Nwsdpfxjd Amwio Ai Ton Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg Good condition

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Nwedpfx Aijz Tf Enj Tjn Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: good (used), Pressure testing device, measuring device -with trailing-pointer -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm Nwsdpeb A Rlyjfx Ai Ton -Weight: 4 kg

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. Nwedpfxed Nnb Rs Ai Ten On stock. Sellable immediately. Total price 1000 Euro.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 3100 Press”. Items for sale: 1 x Xerox Versant 3100 Press with the following specifications: Includes finisher A-GW04/A-GW07/A-FN13 Includes Xerox FreeFlow Print Server Includes paper deck A-CF03 Includes a stacking unit Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 3,638,436 pages Colour: Approx. 320,860 pages Black: Approx. 3,317,576 pages Condition: This is a second-hand machine, which may show signs of wear Nodpfxs Afupfo Ai Tswn (minor scratches or yellowing). The machine has been tested to ensure it is in working order A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.