Used Anayak Hvm-3800-P for sale (41,164)

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Nwjdpfx Ajxcgtgodrei Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2008, machine/vehicle number: 220028, CNC control: HEIDENHAIN iTNC 530, travel ranges: X-axis 4300 mm, Y-axis 1500 mm, Z-axis 1300 mm, table size 4970 mm x 1200 mm, max. table load 15,000 kg/m, tool holder ISO 50, multi-angle milling head 45°, automatic angular positioning of axes B and A, spindle motor power 22 kW, hydraulic rotary lock, working feed rate 10,000 mm/min, rapid traverse rate 20,000 mm/min, with coolant system, total spindle operating hours: 25,496 hours. Nodpjzn A U Rofx Adrowi

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Nwedpfx Adeyry Rfsrji Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Nedpfsxc Hh Djx Adrewi Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,087 h, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, table height: 925 mm, The machine has undergone a complete inspection, with the milling head and the telescopic cover of the X-axis repaired. Additionally, the control panel and the polycarbonate doors have been renewed, and the machine has been thoroughly cleaned. TECHNICAL DETAILS Travel distances X-axis: 5,300 mm Y-axis: 1,500 mm Z-axis: 2,000 mm A-axis: +45° to −225° B-axis: +165° to −18° Spindle data Spindle speed range: 60 – 5,000 rpm Njdoxbd A Nopfx Adrowi Tool holder: SK 50 DIN 69871 Spindle outer diameter (front bearing): 140 mm Spindle bore: 90 mm Table dimensions Clamping area: 6,000 × 1,200 mm Table height: 925 mm Feed rate: 10 – 6,000 mm/min Rapid traverse (X & Y): 15,000 mm/min Rapid traverse (Z): 10,000 mm/min MACHINE DETAILS Control system Manufacturer: HEIDENHAIN Model: TNC 530 Operating hours Spindle hours: 8,087 h Control system on-time: 3,785 h Machine on-time: 30,238 h Note: The machine has already been dismantled.

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Nwedpfx Aougbrqodrji

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Nodezg Dq Dopfx Adrowi Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Nwedpfx Adjrx Rtrjrsi Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Nodpfxezcpg Dj Adrowi Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Ref. -No.: 10634 Nwodpfxozc D Euj Adrji Manufacturer: ANAYAK Type: P 3200 Year of construction: 2004 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 1400 mm Z-Travel: 750 mm Table-Size (Lxw): 3200 x 1400 mm spindle running time: 23.291 H Control: 83.301 H machine: 73.907 H Program run: 27.807 H

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. Njdpfx Adsqpd D Isrjwi 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.

Condition: good (used), TECHNICAL DATA SHEET • CNC: Heidenhain TNC 430 • Table surface: 7,100 x 1,200 mm • Longitudinal travel (X-axis): 7,000 mm • Cross travel (Y-axis): 1,500 mm • Vertical travel (Z-axis): 1,500 + 500 mm • Rapid traverse (axes): 20,000 mm/min • Maximum working feed: 10,000 mm/min • Automatic head with 1° / 1° indexing: Included • DVPE 1000 rotary table with 1200 x 1200 mm surface Nwodpjxqq Rrofx Adroi • Spindle taper: SK-50 • Speed range: 20 – 3,500 rpm • Number of speed ranges: 2 • Main motor power: 50 kW • Automatic tool changer: Included • Tool magazine capacity: 60 positions • Internal coolant supply: Included • Chip conveyor: Included • Electronic handwheel: Included • Additional paper filter tank: Included • Operator platform: Included • Enclosure with 4 sliding doors: Included • Maximum table load: 30,000 kg • Machine weight: 45,000 kg

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Nwedjyf Dp Eepfx Adrji Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Nodperx Rxtofx Adrswi Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Nsdpey R Dn Hefx Adrewi Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Year of construction: 2001, operating hours: 27,046 h, condition: excellent (used), functionality: fully functional, CNC traveling column milling machine in cast iron design Extremely stable design thanks to the X-axis with triple guidance and a fixed table. Machine will be delivered EXW. TECHNICAL DETAILS X-axis (longitudinal) linear guide: 5,300 mm (triple guidance) Y-axis (traverse) linear guide: 1,000 mm (double guidance) Z-axis (vertical) flat guide: 1,500 mm (double guidance) Spindle speed range: 60 to 3,000 min-1 Tool holder: SK 50 Tool changer: 40-position Pull stud: DIN 69872-B Drive power: 30 kW Tool dimensions: max. L=350mm / D=200mm Table size: 6000x1000mm Heidenhain control: TNC426 with color screen and handwheel Rapid traverse X, Y, Z axes: 10,000 mm/min Clamping area: 6,000 x 1,000mm T-slots: 22 H12 / spacing 130mm Central T-slot: 22 H7 MACHINE DETAILS Operating time: 62,774 hours (as of 11/2022) External coolant pump: 1.1 kW with 50 l/min Machine weight: 43,000 kg EQUIPMENT - Electric handwheel Heidenhain - Swivel machining function monitored with light barriers - New X-axis covers - Chip conveyor, 2-stage - New milling head bearings, 2021 - Operating manual / documentation CONDITION Nwjdelhqkhspfx Adrei - Service and maintenance have been performed according to schedule - Geometry is in good condition - Suitable for swivel machining Machine available from July-August

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 160-180 EX incl. LRX 100 (35.000 h) (S&P 3800) Manufacture year: 2016 Operating hours: 35,000 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Nedpfx Asznbf Iedrowi Clamping Force: 160 t Tie bar distance: 630 x 520 mm Mould installation height min.: 300 mm Plate distance max.: 1000 mm Dimensions: 5400 x 1600 x 2100 mm Eeight: 13200 kg Connected load: 28 kW All electric, 2 x Airvalve, 12 x Hoterunner, MC 6 in german, english, polnish and chinese, Interface Robot, Interface Temperatur device, Robot System LRX 100 (10 kg) X = 550mm / Y = 120mm / Z = 1500 mm / C = 90°, price when new approx. 205.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2007, operating hours: 39,215 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 4,000 rpm, controller model: Fanuc 18i-MB, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Nedpfx Aozmw I Asdrjwi Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,100 mm Table dimensions: 2,700 × 850 mm Table load capacity: 6,000 kg Spindle connection: ISO 50 – DIN 69871 AD Spindle power: 22/26 kW Spindle speed: 60–4,000 rpm Gear stages: 2 Working feed rate: 20 m/min Rapid traverse rate: 10 m/min Axes: A- and B-axes Division: 2.5° MACHINE DETAILS CNC control: Fanuc 18i-MB Coolant pressure through the spindle: 23 bar Machine weight: 16 t Operating hours: 39,215 h EQUIPMENT Automatic 2-axis swiveling head for the A- and B-axes Two-stage spindle gearbox Coolant supply through the spindle at 23 bar Note: The functionality of the spindle cooling system was not tested prior to the auction. A surcharge of €500 will be applied for the necessary equipment if container loading is required.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 3,000 rpm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS Travel in X-axis: 2,000 mm Nedpfszmfn Dox Adrswi Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,100 mm Maximum workpiece weight: 5,000 kg Clamping area (L x W): 2200 x 850 mm Number of T-slots: 5 Width of T-slots: 22 mm T-slot spacing: 150 mm Feed rate in X/Y/Z axis: 10,000 mm/min Rapid traverse rate in X/Y/Z axis: 20,000 mm/min Spindle speed: 60 - 3,000 rpm Swivel range of the milling head: -180°/+177.5° Positioning of the milling head angle: Automatic in the A+B planes Positioning accuracy: ±0.014 mm Repeatability: ±0.008 mm Ball screw diameter in X/Y/Z axis: 63 mm Ball screw pitch in X/Y/Z axis: 16/10/10 mm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Motor power: 38 kW Power of the hydraulic unit: 1.8 kW Operating pressure of the hydraulic unit: 110 bar Capacity of the hydraulic unit tank: 100 l Delivery rate of the hydraulic pump: 9 l/min Power of the cooling unit: 1.36 kW Air pressure: 6–7 bar Air flow rate: 50–225 l/min Power supply: 400 V; 50 Hz Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,000 x 2,900 mm Total weight: 14,000 kg EQUIPMENT Two-stage spindle speed control

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Revised in 2022 Axes X-axis travel mm: 2.000 Y-axis travel mm: 1.000 Z-axis travel mm: 1.100 C-axis degrees: 0.001º (cont) Worktable Table dimensions mm: 1.250x1.400 Maximum weight on table kg: 5.000 Nwsdpfxorxfnij Adrei Spindle Spindle speed rpm: 60 - 5.000 Automatic Spindle (Axes A/B): 2. 5º/2. 5º Tool system Tool holder: ISO-50 DIN 69871A Tool magazine slots: 60

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes Nodpfx Ajrw Arzodrswi X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic Handwheel Chip conveyor 4th axis ready

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm Nwjdpsv Rdzbjfx Adrji z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories *

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Nsdpfxjzc D Enj Adrjwi Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Brand: ANAYAK Njdpfxoy Uy Eco Adrowi Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Control system: Heidenhain 530 Table size: 4200 x 1100 Travel distances: x: 4000, y: 1200, z: 1500 mm Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Collection point: Bremen The machine is in daily use, so operating hours will continue to accrue. An inspection can be arranged at any time. Disassembly, loading, etc. is the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts". _____ Our general terms and conditions apply. In addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any warranty.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Anayak VH plus-2000 Year of manufacture: 1999 Machine no.: M-991103 Control system: Heidenhain TNC426CB Net weight: 24 tons Nwsdpfjy Tqbxsx Adroi X/Y/Z: 2000/1300/1460