Used Applied Biosystems Quantstudio 5 for sale (59,300)

Condition: used, Specification: Excitation (light source) Bright white LED source with a median lifetime of >5 years Dimensions and weight 27 × 50 × 40 cm (W × D × H), Dsdpox I I Ulefx Aktekn

Condition: used, This listing is for the Applied Biosystems ProFlex PCR Sytem The unit is in full working condition and is ready for immediate release. Dkedpfox Syrqox Aktsn The Applied Biosystems ProFlex PCR System is a thermal cycler/performance PCR instrument designed for amplifying DNA through PCR — a core technique in molecular biology for cloning, sequencing, gene expression studies, genotyping, and other applications. It’s used in research, teaching, and clinical lab settings (research use only; not for diagnostic procedures)

Condition: used, This listing is for a Thermo Fisher Scientific Applied Biosystems ProFlex TM Base The unit is in full working condition and is ready for immediate release The Applied Biosystems ProFlex PCR System is the latest in the line of Applied Biosystems thermal cyclers. Dkedpfx Aoxwczvoktsn The ProFlex 96-well PCR System offers the following features:

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Dkjdoxzhpmjpfx Aktjn Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: excellent (used), Applied Biosystems ViiA7 Here we offer you an Applied Biosystems ViiA7. Specifications: Block change from instrument front in less than 1 minute; no secondary tooling required. Supported applications Standard curve, comparative CT, genotyping, presence/absence, HRM, melting curve. Temperature uniformity ±0.5 °C, within 30 seconds of reaching temperature set point Run time ~35 min for 96/384-well blocks with Applied Biosystems® Fast Master Mix Supported blocks and volumes 96-well standard (10-100 μl reactions) 96-well Fast (10-30 μl reactions) - 384-well (5-20 μl reactions) TaqMan® Array Micro Fluidic Cards (~1 μl reactions). Detectable sensitivity up to 1 copy - Excitation/detection wavelengths 6 Excitation (450-670 nm). 6 Emission (500-720 nm) - Dynamic Range Up to 9 logs linear dynamic range. Resolution Detect as little as 1.5-fold changes in target quantities in a singleplex reaction 21 CFR p11 Enablement Security, audit, and e-signature features for instrument data Automation Includes plate loading arm with barcode (sales, service, and support provided by Life Technologies) Remote notification Notifies user via email when run is started, stopped or aborted Data export format Fully configurable by user Description: Applied Biosystems Real-time PCR ViiA7. Ideal for performing medium to high throughput real-time PCR. Interchangeable blocks for 96-well, Fast 96-well and 384-well plates as well as TaqMan Array Cards. Fast block change. Touchscreen interface. 2x Ethernet port. 2x USB port. 1x RS 232 connector. 2x connection on the display. Weight: 67 kg Type: Applied Biosystems ViiA7 Condition: used / used Dodpfelat Sisx Aktskn Scope of delivery: (See picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), 2 PCR machines Dkodpfxjqvpfpj Akton 1 PC + software Good working condition. Please check out our other listings as well.

Year of construction: 2020, condition: new, functionality: fully functional, Brand new in the box, never used. Please check out our other listings as well. Dkedpfjwiqggox Aktjn

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Dkjdpfx Aszbkx Ejkten Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Dkodpfx Akjxxu Drjtjn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 43,500 mm, total height: 3,500 mm, clearance between the columns: 2,700 mm, shelf height: 3,500 mm, number of shelf rows: 5, pallet spaces: 135 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 43,500 mm, support length: 2,700 mm, 5 rows of pallet racking (5 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, load capacity 3000 kg. Dkedeza R Ecspfx Aktsn - 20 frames (RM3511 - RAL5019) - 40 base plates, shims, fastening materials - 80 floor anchors (ZZBA1210) - 60 single beams (T27114 - RAL2008) - 5 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made to the entire territory of the Federal Republic of Germany; except for islands! Deliveries to EU countries are made according to individual agreements.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, WE OFFER AN NICE WORKING CONDITION SPINNER U-620 MACHINE WILLBE AWAILIBLE FROM THE PRODUCTION IN FEBRUARY 2026 WITH MACHINE WILL COMES FULLY EQUIPMENT TOOLS AND ACCESSORIESS WITH FULL TOOLS AND ACCESSORIESS MACHIE WILL BE IN FEBRUARY AWAILIBLE FROM THE PRODUCTION OF TOOLMAKER TECHNICAL DETAILS: CONTROLS: HEIDENHAIN ITNC 530 YEAR : 2013 SPINDLE WORKING HOURS: 31995 PROGRAM RUN: 30893 MACHINE ON: 49012 TRAVELS AXES: X=620 mm Y=520 mm Z=420 mm Table diameter: 560 mm Max. part weight: 500 kg Max. spindle speed: 12.000 Rpm Connection power: 29kW Tool holder SK40 Tool changer 32-fold Max lenght of tool: 290mm Max mass of tool: 7kg TRANSPORT DIMENSIONS: L 3500 X W 2300 H 2910 WEIGHT OF MACHINE: 7100 KG FOR DISMANTLING AND LOADING WE CARE WITH AN PROFESSIONAL TEAM Dkodpfx Akjydrztstsn WE ALSO CAN ORGANIZE FOR CUSTOMERS TRANSPORT TO THE SITE OF THEIR COMPANY

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws Dkodpfx Akoyw Tupoton One-piece hard internal jaws Key

Condition: used, This listing is for a second-hand DTG pre-treater, the ‘Schulze PRETREATmaker 5’ Condition: This is a second-hand unit, which may show signs of wear (minor scratches or discolouration). The device has been tested and is in working order Dodpfx Ajy R Nrkoktskn Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min Dkjdey Sny Ajpfx Aktsn - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray Djdpfx Aksy Rnrvotjkn + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished turbines from a continuous shot blasting machine - Rösler RRB 22/5-L. Turbine type - Hurricane H42. The turbines have been refurbished using original spare parts made of tool steel. Shot blasting machine, sandblaster, blasting turbine, shot blasting, sand blasting, throwing turbine. Dkjdpfxeyy Rybs Akton

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift Djdeyzl T Eepfx Aktekn - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Dodpfx Akevbdpystjkn Width (mm) 485 Depth (mm) 920

Condition: used, diameter div. number 36x Dksdjww Nb Ejpfx Akten tool adaptor BT 40

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, AN EXCELLENT OPORTUNETEY TO GET FULLY EQUIPED MACHINE READY TO WORK MACHINE IS STIIL WORKING IN THE PRODUCTION , WILL BE ABLE TO TOOK OUT IN MIDLLE FEBRUARY 2026-NEXT MONTH Dodpfjydrwhjx Aktskn WE SELL AN NICE CONDITION HERMLE C40U FULLY EQUIPED WITH COMPLETE FULL TOLS ACCESSORIESS MACHINE IS WORKING IN PRODUCTION DAILY ORDERS. THIS IS AN VERY NICE OPORTUNETEY MACHINE WILL BE AWAILIBLE IN NEXT WEEKS FOR PICKING UP TECHNICAL DATA: x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN iTNC 530 rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper SK 40 DIN 69871 spindle drive 15 kW max. torque on the spindle 130 Nm Tools changer 38 fach/tools Internal cooling system 80 bar handwheel HR- 410 total power requirement 41 kVA weight of the machine ca. 10,5 t EQUIPMENT: MACHINE WILL COME EQUIPED WITH COMPLETE WORKING PLACE , WITH ALL COMPLETE TOOLS AND ACCESSORIESS. COMPLETE TOOLINGS COMPLETE CUTTING TOOLS COMPLETE DRAWERS TABLE WITH ALL ACCESSORIES , WHICH BELONGS TO HERMLE WORKING STATION. RENISHAW WASTE BUCKET CONVENYOR MAGNET CLAMPING UNIT

Condition: good (used), Year of construction: 1996, functionality: fully functional, WE OFFER AN GOOD CONDITION MATSUURA WITH 4 TH AND 5TH AXIS. MACHINE WAS WORKING IN ROLLS ROYCE FROM NEW. AND WAS ALL TIME GREAT MAINTAINED. Description MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP will be present on key and email. WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE 1996 mfg : : MATSUURA mpn MC-800VF Matsuura MC-800VF : ManufacturerMATSUURAModelMC-800VF 3+2 AXIS Year1995 ConditionUsed Brand MATSUURA ControlCNC (Yasnac i80 CNC control) Table1200mm x 400mm Dkedpfxsvkx Tlj Aktjn Power15 hp Rpm 8000 rpm Atc 30 TaperBT40 Axis3+2 Weight APROX 7000 KG TravelsX = 800mm, Y = 440mm, Z = 485mm Specifications Manufacturer MATSUURA Model MC-800VF 5 AXIS Year 1995 Condition Used Brand MATSUURA Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp Rpm 8000 rpm Atc 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG Travels X = 800mm, Y = 440mm, Z = 485mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, WE OFFER AN VERY GOOD CONDITION OKUMA MU 400 VA WITH NEW SPINDEL ON 2022 INCLUDED COMPLETE EQUIPMENT AND FULL TOOLINGS INSIDE TOOLCHANGER. MACHINE Djdpfx Aevmithjktskn - Okuma MU400VA 5 AXIS CNC Vertical Machining Centre (2006) Description: Main Drive Spindle speed range 15000 RPM Spindle motor power (10min/cont.) 22.5/18.5 kW Tool taper BT40 BIG+ Movement X-Axis Movement 762 mm Y-Axis Movement 460 mm Z-Axis Movement 460 mm 1-AXIS Movement +20/-110 2-AXIS Movement 360 DEGREES Tools Slots in storage 20 Additional Equipment Automatic tool changer cooling through spindle at 30 bar control OSP200 DIMENSIONS AND WEIGHT Measurements width 2500 Measurements depth 2800 Measurements height 2950 Machine weight 7900 kg

Condition: like new (used), Year of construction: 2023, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off left hand - 3off right hand units , Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers Dsdpfx Ajyyl Aqjktokn 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organised by appointment 💰 Price: Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries Viewings Welcome for full demonstration

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Dedpoy Hgkvjfx Aktjkn Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Dkjdpfx Akjvz U Eretsn Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module