Used Arbeitskorb V 1500 Ab for sale (45,270)

Year of construction: 2024, condition: new, weight max. in kg 300 kg Gedpfexcywrex Almsbl dimensions 1200 x 900 x 1300 mm weight 125 kg For attaching to the forks. fastening with safety bolts, checker plate floor, entry door, safety grille, storage basket for tools, Fork pockets 190 x 100 mm, powder-coated. Approved for a maximum of 2 people, approved by the dekra. Basket height 1050 mm Basket width 1100 mm Basket depth 700 mm

Condition: new, PRICE: 1500 EUR Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Dimensions: 540 × 490 × 540mm Heaters: 2 x 40 cm Electrical power: 1.5kW Godpfxeuu H Eyj Almobl Weight: 59 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: SEW, electric motor unfortunately no type designation -Power output: approx. 1.1 kW -Speed: 1500 rpm -Voltage: 220/380 V -Shaft: Ø 12 x 20 mm -Design: B3/B5 -Dimensions: 300/225/H200 mm -Weight: 19 kg Gbedpfx Alogx Al Ujmjl

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW Godpeu Nzwuefx Almsbl voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Gbjdpfxogt E Ilj Almel Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets Gbedpfxjvn Tg Is Almel New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), For sale: High-end SIEMENS industrial electric motor – robust German engineering, designed for demanding applications. The motor is equipped with an encoder (2048 pulses) and a temperature sensor, allowing for precise control and operation monitoring. Visual condition is good with normal signs of use for industrial equipment. Technically, the motor is fully functional. ⚙️ Technical data Manufacturer: SIEMENS Model: 1PH7167-2NF03-0BJ0 Type: 3-phase electric motor Power: 37–45 kW (depending on voltage) Voltage: 350–459 V Current: 76–82 A Speed: 1500 / 1750 / 2000 rpm Duty: S1 (continuous) Protection rating: IP55 / IP54 Encoder: D01 2048 S/R Temperature sensor: KTY 84-130 Standard: EN 60034 Country of manufacture: Germany 📌 Additional information ✔ robust construction – SIEMENS industrial quality ✔ pulley installed ✔ complete wiring set + encoder ✔ ideal for CNC machines, production lines, industrial drives ⚠️ Condition / remarks Gbsdpfx Ajyyppnelmsl Motor in good technical condition Normal signs of use are visible One mounting lug has a small crack (visible in the photo) – does not affect operation. 🚚 Shipping / collection Pallet shipping available Personal collection possible Assistance with transport organization provided

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Table size 1200 x 450 mm Max load 400 kg Gsdpsy Hgnhsfx Almobl X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Gbjdoulu Nujpfx Almel Manufactured by Electro Heat Sweden AB.

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Gsdpfx Alsuprqwomobl Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Gbjdpevgrh Uofx Almol Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Gjdpfx Aov T I Evjlmobl Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, HESS RH 1500 2.1 SVA Year of manufacture: 2008 Start: 2009 Very good technical condition. Operating until the end of January. In 2022 a new roller for the upper hopper was installed by Topwerk - Hess. Vibrating table completely overhauled Siemens S7 control Gjdpfx Alsyb Rvkomsbl 3 molds included Price 195000euro Machine is located in Slovenia

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned Gjdpfovwlqqex Almsbl All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Electrostatic air filter for air-handling systems - central exhaust ELBARON - RON 15 S oGk – 15.000 m³/h – 230 V – without fan Max. Air flow rate: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour on request The application: The ELBARON duct air filter series were designed for central air filtration in production halls as well as for plant and building technology. Your advantages: - 15 unit variants available - Direct from the manufacturer - High filtration efficiency - Modularly expandable - Easy maintenance - Low follow-up costs due to reusable filter media - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Also available as mirror-image version - Robust construction - Quality Made in Germany Based on our filter technology, which has been tried and tested for years, this filter unit can be used as a central air filter unit in ventilation ducts. ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air. This way, the air in your production hall is cleaned effortlessly. Our air filter can also be easily integrated into central systems for machine extraction. Gsdpfx Aleh Rfccsmebl ELBARON filter units protect downstream heat exchangers or air conditioning units from premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large production plants due to their high separation efficiency, large capacity and easy maintenance. Take advantage of the enormous potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are effortless to clean and reuse.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 215 mm, throat depth: 410 mm, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg Gbsdoy Ix Ipspfx Almel EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors 2 manual backgauge fingers

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Gsdpsv S Iqcsfx Almjbl total power requirement 4 kW

Condition: good (used), mileage: 142,217 km, power: 140 kW (190.35 HP), first registration: 06/2018, fuel type: diesel, tire size: 245/45R18, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,370 mm, total width: 1,930 mm, total height: 1,880 mm, loading space length: 1,660 mm, loading space width: 1,420 mm, loading space height: 1,290 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional options and accessories = - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/Cassette - Rear view camera - Partition wall = Notes = Configuration: 4x2, Payload: 742 kg, Unladen weight: 2,358 kg, Gross weight: 3,100 kg, Unbraked towing capacity: 750 kg, Braked towing capacity on main axle: 2,500 kg, Tow bar, Alloy wheels, Cab type: Double cab, Cruise control, Air conditioning, Number of airbags: 6, Rear wiper, Parking assistance: front and rear, Tinted windows, Electric windows, Electric mirrors, Partition wall, Radio/Cassette, GPS navigation, Color: silver, metallic, Rear view camera, Lighting type: LED lamp, Climate control, Bluetooth, Engine power: 140 kW (188 Hp), Fuel: diesel, Euro: 6, Drive type: timing chain, Transmission: automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side walls lined, Roof rack: none, Side doors: 2, Side windows: 4, Rear closure: tail lift, Central locking, Seats: 5, Seat configuration: 1+1+3, Upholstery: leather, Seat adjustment: manual, L3 XL Double Cab 190Hp Electric Doors + Tailgate 360 Camera Towbar PDC LED Euro6!, Spare wheel, Tire type: summer tires = Further information = General Information Number of doors: 2 Registration number: V-52-PLK Axle configuration Tire size: 245/45R18 Brakes: disc brakes Suspension: coil spring suspension Axle 1: Tire tread left: 4 mm; Tire tread right: 4 mm Axle 2: Tire tread left: 5 mm; Tire tread right: 4 mm Weights Unladen weight: 2,358 kg Payload: 742 kg Gross vehicle weight: 3,100 kg Functional Loading height: 52 cm Interior Upholstery: leather Condition Gsdpfxjyylc Rj Almobl Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Lease price: €560 per month (panel van, 72 months); Please ask for further information and terms

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Gbjdoyhph Ejpfx Almol Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2025, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Inkjet base Gbsdpfx Ajhl H Ikolmsl

Condition: good (used), functionality: fully functional, Tool holder: MK 4 Drilling capacity in ST60: 35 mm Drilling capacity in cast iron: 45 mm 4 speed ranges: Stepless in range 1 approx. 65 - 200 rpm Godpey Rnz Refx Almjbl Stepless in range 2 approx. 200 - 600 rpm Stepless in range 3 approx. 130 - 400 rpm Stepless in range 4 approx. 400 - 1200 rpm 3 feeds: 0.09 + 0.16 + 0.28 mm/rev

Condition: new, color: other, Year of construction: 2024, Year of manufacture: 2024 Empty weight: 500 kg Dimensions (LxBxH): 117 x 245 x 100 cm Bucket capacity: 1,5 m³ CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Condition CE type: CE Gjdpjwl Rkkjfx Almobl Unused Manitou CBA1500 Light material buckets, 2450 mm wide, Bolt-on edge, Multiple on stock

Year of construction: 2000, operating hours: 12,470 h, condition: used, Field of application: Construction Empty weight: 65.000 kg Gbsdpfox R Twwox Almjl Please contact Emal Jaweed for more information

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, GRASSAIR RLR 1500VT screw compressor (screw module by ATLAS COPCO), machine after service with air dryer and frequency inverter (variable speed). Technical data: capacity: 1.70 m3/min (1700 L/min); motor power: 11 kW; max. pressure: 12.5 bar; year: 2010; compressor is fully operational; net price: 8,500 PLN Godpfx Alsyt H D Uomobl gross price: 10,455 PLN Video link below.

Condition: used, Year of construction: 1996, pressure 0050 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm - controlled axes: Y1, Y2, X, R - Pneumatic die shift - hydraulic WILA/TRUMPF upper tool clamp - hydraulic WILA/TRUMPF lower tool clamp Gedpfx Ajy Hxmijlmebl - LAN network connection - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable - CNC control, operation on the front left - 2-hand operation / foot switch - rear + side protection