Used Arp Ez 100 for sale (24,959)

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98 EZ100/2675, overall weight: 4,000 kg, number of blades: 68, total length: 2,800 mm, total height: 2,500 mm, control cabinet length: 500 mm, control cabinet width: 500 mm, control cabinet height: 1,000 mm, total width: 2,000 mm, rotor length: 1,000 mm, power: 30 kW (40.79 HP), type of input current: three-phase, year of last overhaul: 2025, working width: 1,000 mm, sieve perforation: 15 mm, For sale is an ARP single-shaft shredder type EZ 100 in operational condition, ideally suited for applications in the recycling industry, plastics processing, wood preparation, as well as for industrial size reduction processes. The machine is equipped with a hydraulic feed system for consistent material intake and a robust cutting system for continuous operation. Nodsyiuv Dopfx Akuolb

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Nsdpfx Aju Rwa Iokuelb Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath for work with MAP atmosfere ( hig % of O2) Available in stock. Nedpjfk Sizjfx Akuolb Completely new with 12 months warranty Nominal flow: 100 m3 / h at 50Hz. End vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us.

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Nljdpfx Aoy Nrynekuob

Condition: used, Year of construction: 1989, pressure 100 t stroke 560 mm throat 540 mm dayligth 800 mm table surface area 1000 x 1000 mm die cushion capacity 50 t die cushion stroke 200 mm die cushion area 710 x 650 mm table height over floor 910 mm ram surface 1000 x 1000 mm feed down 400 mm/s feed up 300 mm/s working feed 57,7 mm/s oil volume 650 l power requirement 37,5 kW Weight 15,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm Nsdpfx Ajy Ruq Sekujlb AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1990, pressure 100 t throat 300 mm stroke 20 - 120 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 800 x 560 mm hole in the table 310 x 180 mm table height over floor 745 mm ram surface 520 x 245 mm ram adjustment 75 mm power requirement 5,5 kW Nljdpfx Aevuug Aokuob weight 5,5 t dimensions (WxDxH) 1,1 x 2,4 x 2,4 m with motor, back gears, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Description 100 TON C FRAME PRESS WITH BOTTOM FORCE BACK UP 40 TON Machine is great working condition, was overhauled cilinder, sealings. AWAILIBLE 3 MACHINES BOTTOM FORCE 40 TON Specifications Manufacturer MULLER 100T Model CEZ 100 Year 1979 Condition Used Press force 100 TON Travel up doen 0-560mm Nledpjvldxisfx Akuob Travel bottom up 0-200mm Power 15Kw

Condition: used, mileage: 50,000 km, power: 73 kW (99.25 HP), first registration: 05/2019, fuel type: diesel, empty load weight: 1,848 kg, overall weight: 2,340 kg, next inspection (TÜV): 07/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 2, total length: 4,403 mm, construction height: 1,880 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, sliding door, soot filter, * Appointment scheduling for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn't spend it waiting. Therefore, we kindly ask you to schedule an appointment by phone for consultation or a test drive. * Non-smoker * Service book * This vehicle features a well-maintained service booklet. * Last service carried out at 46,101 km. * Engine: 1.6 L - 73 kW Blue-HDI FAP * Drive type: Front-wheel drive * 5-speed gearbox * Lumbar support, driver's seat, adjustable * Driver assistance system: Forward collision warning with brake intervention * Fog lights * On-board computer * Cruise control with speed limiter * Rear hatch with window / heated rear window and rear wiper * Hill start assist * Start/stop system * Diesel particulate filter * Special paint: Snow White / Kaolin White * Body type: Panel van * Daytime running lights * Air conditioning * Automatic light follow-me-home function (Coming Home, Leaving Home) * Seat upholstery: Fabric * Driver's seat height adjustable * Single front passenger seat * Audio system RD 6 (radio/CD player with MP3 capability), 6 speakers * Gear shift indicator * Driver airbag * Driver seat center armrest * Tire pressure monitoring system * Exterior mirrors with black caps * Electric front windows * Storage compartment above sun visors * Central locking including automatic door locking * Automatic door unlocking in case of an accident * Electric front right window * Electronic stability program (ESP, Bosch) * Adjustable steering column * Right sliding door * Electric parking brake * Anti-lock braking system (ABS) * Electric power steering * Traction control (ASR) * Drawer / storage compartment under left front seat * Electric front left window * Rubber mats for passenger/cargo area * Heated exterior mirrors, both sides * Wheelbase: 2785 mm * SCR system (AdBlue technology) * Low emissions according to Euro 6 standard * and much more * All information provided without guarantee. They do not constitute agreed-upon characteristics. Subject to errors and prior sale. * Our services: * Financing available, also without down payment * Registration service * Trade-in of your used car * Delivery available * Tire service, winter and summer tires available for an additional charge * We speak various languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak Nljdpfxoxv Uz Se Akuob * We look forward to your visit!

Condition: used, digital gauge Digibar Nodscf Rb Tepfx Akuslb is suitable for measuring static and quasi-static fluid and gas pressures. PE 100 is the battery version.

Condition: used, Model - CR1100D Max. Width of planing - 1100 mml Min. Thickness of planing - 8 mm Max. Thickness of planing - 150 mm Min. Length of planing - 435 mm Bottom spindle speed - 4500 RPM Electric power - 75 kW Feed drive motor - 5 HP Pressure roller elevation motor - 2 HP| Dust hood outlet dimensions - O125 mm x 1, 200 mm x 4 Cutter-head diameter - 150 mm Nledpewf Hbrofx Akusb Air pressure - 4~6 kg/cm Table height from floor - 990mm Machine dimensions (L x W x H) - 2800x2150x2000 Net weight (Approx) - 4600 kgs Gross weight (Approx) - 4950 kgs

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Nlodpfx Asxllclokusb

Condition: excellent (used), Professional milling head with SK40 mount designed for facing and roughing steel and cast iron. Model: AHSC 100-05-11. Working diameter: Ø100 mm. Maximum speed: 22,500 rpm. Number of insert seats: 4. Mount: SK40. Condition: used, fully functional – visible signs of use. Ideal for CNC machining centers and conventional milling machines, ensuring high performance and stability even at high cutting speeds. Nsdoxk T Rnepfx Akuolb

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 100 m3 / h at 50Hz. Nlsdpeftzf Eefx Akujb Final vacuum: 0.1 mbar abs. Any doubts, do not hositate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 25 kg, total length: 350 mm, total width: 260 mm, total height: 210 mm, volume flow: 30 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 2,850 rpm, warranty duration: 12 months, protection type (IP code): IP55, Oil lubricated rotary vane vacuum pump. Available in stock. Completely new. 12 months warranty Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Nedpfx Aksftzx Eeuslb Any clarification, do not hesitate to contact us.

Condition: used, functionality: fully functional, KNIFE SHARPENING MACHINE Nlsdpfx Akjy Uk Sysuob

Condition: ready for operation (used), Marposs 3404995660 / 3404995 measuring probe SN: 09T01002 – cable length: 7.5m, used, normal signs of use, 100% functional, delivery as per photos. Nljdpsy Nrybsfx Akusb

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. Nledjw Uab Nspfx Akuob ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: GP330/W404, DEMAG KBK Crane Sky / Crane Runway 7x6m (bridge travel approx. 5.5m) The crane is also available in several other dimensions with a raised trolley. Load capacity / lifting capacity: 1000KG Technical data of the system: Crane runway made of Demag KBK2 rails With raised trolley – crane girder is positioned between the two runways for maximum lifting height System is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/suspenders, etc. Incl. SWF chain hoist NL 1000KG, year 2018, crane itself is older! Crane is dismantled and immediately available Very good condition, see pictures Item location: 75053 Gondelsheim Shipment by freight forwarder or pickup only by appointment Demag KBK1, KBK2, and KBK3 rails are stock items! Nledpfx Aey Hf A Dokusb Other KBK systems with load capacities from 125KG to 1600KG available in stock. Please enquire about your crane runway with desired load capacity and dimensions without obligation.

Condition: new, Year of construction: 2024, Roots booster vacuum pump. Available in stock. Marpa Vacuum brand pump. Pump completely new. 12 months warranty Nominal flow: 500 m3/h at 50Hz. Nedpfx Akofk Si Souolb Final vacuum: 3x10^-4 mbar Any clarification, do not hesitate to contact us.

Year of construction: 1989, condition: ready for operation (used), number of axes: 3, This 3-axis Parpas SL100 Bed Type Milling Machine was manufactured in 1989. It features a large working envelope of 2500x1500x1000 mm and is equipped with 2 steel teams. Consider the opportunity to buy this Parpas SL100 Bed Type Milling Machine. Contact us for more information. Nlodpeyca Irjfx Akujb • Dimensions/Travel/Capacity: 3500 x 2000 x 1000 (units not specified) • Note: Listing mentions “2 cast iron teams” (verbatim). Please confirm the correct term (e.g., beams/tables) for accuracy.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, grinding length: 1,000 mm, grinding width: 550 mm, overall weight: 2,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, Hydraulic surface grinding machine Renato Scarpini model RS 1000x550, used, fully overhauled, variable wheel speed, variable table speed, total weight approx. 2500 kg, equipped with magnetic chuck, complete with manual. Njdpowu Rwvsfx Akuolb

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized Nledoy Uhu Ejpfx Akusb - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. Nlsdpjrivxcsfx Akusb A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: excellent (used), Complete, professional HOLEX tool holder for sale, designed for micro-drilling and precision machining. Nlsdpfx Ajw Rd Swokujb Technical specification: • Manufacturer: HOLEX • Reference: 300520 16 • Model: SK 40-1/10-100 • Length: 100 mm • Collet: ER16 with HOLEX nut (marking G 6.3 / 15,000 rpm visible) • Spindle: SK40 • Max torque: 70 Nm • Balancing: G 6.3 / 12,000 rpm • Year: 11/10 • Included: micro drill – mounted and ready for operation Very good technical condition – the collet holds securely, drill is undamaged. Ideal tool for highly precise operations in electronics, medical, or toolmaking applications. Shipping or personal pickup available.

Condition: used, Year of construction: 2019, machine/vehicle number: 1202-260001, The Hezinger B13-3100 hydraulic sheet metal shear is a powerful and precise cutting machine for professional use in sheet metal and steel processing. It is ideal for precise cutting of sheet metal up to a material thickness of 13 mm and a working length of up to 3,100 mm and impresses with its robust design, high cutting quality and reliable hydraulics. Nljdpfx Aeyilakekujb Thanks to its stable construction, precise blade guidance and user-friendly operation, the Hezinger B13-3100 offers high repeat accuracy and efficiency in daily operation. The machine is designed for a long service life and is an economical solution for workshops and production companies that value quality, performance and reliability. The Hezinger plate shear has a stable roller conveyor. Loading side 3000 X 12000 mm Outfeed side 3000 X 12000 mm