Used Artech Akron 435 for sale (451)

Condition: excellent (used), Edgebander Artech Akron 435 Pre-milling, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finish trimming saws, Multi-cutter R1-R2 – top and bottom milling and corner processing, pneumatic adjustment, Profile scraper, Flat scraper, Polishing unit, Max. workpiece height: 60 mm Max. edge thickness in roll: 3 mm, Feed speed: 12 m/min Pedpfsy Dtw Dex Ag Degk Condition: very good.

Condition: used, Year of construction: 2009, Used BIESSE ARTECH edge bander, model Akron 430 A T Technical data: - Minimum/maximum panel length: 140-3200 mm - Minimum/maximum panel width: 85-3200 mm - Minimum/maximum panel thickness: 10-60 mm - Minimum/maximum edge thickness (rolls): 0.4-3 mm - Minimum/maximum edge thickness (strips): 0.4-8 mm - Minimum/maximum edge height: 14-64 mm - Working height: 900 mm - Panel protrusion from feed track: 25 mm - Feed track speed: 12 m/min - Dust extraction air speed: 30 m/sec - Supply air pressure: 7-10 bar SINTRA LT control Pgedpjyt Nvgefx Ag Djk Entry guide with mechanical viewer -Trimming unit: 2 motors, 1.8 kW each, with pad followers Vertical adjustment for tool position -Gluing unit: glue pot capacity 2 kg 3 air-operated pressure rollers Digital edge thickness viewer -Shear unit with 2 push pressure positions depending on edge thickness -Automatic strip edge loader -End trimming unit: 2 motors, 0.50 kW each, with pad followers, 2 selectable cutting angles (0°-15°) automatically adjustable from control panel (to increase edge overhang or trim for best finishing) -Multifunction corner rounding unit with 4 selectable positions from control panel Possible operations: straight, bevel, radius1, radius2 For each finishing position, +/- edge overhang can be selected -Edge scraper unit -Glue scraper unit Program creation for different finishing options Machine length: 3880 mm Weight: 1530 kg

Condition: excellent (used), Edge banding machine Artech Akron 420 Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing trim saws, Milling units R1, R2, Profile scraper, Condition: very good Pgjdpfx Aexw Uzzeg Dsk

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee. Pgjdpfx Agsvwgizo Dek

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, drive power: 250 kW, control cabinet with star-delta starter. Rotor length: 1200 mm, rotor diameter: 800 mm, number of knives/rotor: 36 pcs, number of knives/stator: 4 x 6 pcs. 2 hydraulically swiveling stators with 2 rows of counter-knives each. Hydraulic pusher, bearing temperature monitoring, central lubrication for rotor bearings. Net weight: 29,800 kg. Year of manufacture: 2005, overhauled in 2025, all wear parts have been replaced. Podpfsxiw Hwjx Ag Djgk

Condition: good (used), Year of construction: 2004, machine/vehicle number: 300 584, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 400 V, input current: 85 A, type of input current: three-phase, overall weight: 8,000 kg, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder - Pusher / compactor Pedpfexrtwwsx Ag Dogk - Electrical control cabinet - Overband magnet - Sampler The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS 132 kW electric motor. Cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm. Subframe/base frame divided for transport purposes. Dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run available by appointment. Pgodpfx Ajv Hr Nxog Dok

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Pgedpsw Am Nqefx Ag Djk Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, This 2 shaft rotary shear will completely refurbished. The cutting unit is equipped with 58mm blades, but can be adapted on request. The drive power is 2 x 75 kW. Fast knive change system incl. coupling. The machine includes a hydraulic pressure device, a feed hopper and a electrical cabinet including Siemens S7 control and coloured HMI 9". Painting can be adapted in a RAL colour on request. Psdjfdvd Ispfx Ag Degk

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Pedpfx Agow Idc Dj Dogk Corner Rounding Unit: yes Maximum panel thickness: 12 mm Operating Units: 9 nr

Condition: used, Year of construction: 2015, machine/vehicle number: 100007528, functionality: fully functional, power: 13 kW (17.68 HP), type of input current: three-phase, total height: 1,700 mm, total length: 9,000 mm, total width: 3,000 mm, Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Pgjdpfoxmi E Hex Ag Dsk Delivery can be arrange in the Republic of Ireland

Condition: used, Lot offer of 4 used pole gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh Pjdpfx Asx Ahthjg Dogk

Condition: used, Batch offer of 10 used Poolgitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. Pedex Ahtbspfx Ag Djgk This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Condition: used, Used Pool gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from the largest supplier in Europe. This steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh container is Pgsdpfx Agjx Ahr Ro Djk

Condition: used, mileage: 120,000 km, power: 120 kW (163.15 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro6, total length: 6,363 mm, total width: 2,050 mm, total height: 2,522 mm, Year of construction: 2019, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Passenger-side airbag, exterior mirrors electrically adjustable and heated, both sides, design package, driver assistance system: emergency brake assist, reinforced rear suspension, speed limiter, rear wing doors (opening angle 270 degrees), seats in cab: sprung driver's seat, seat base cover Pedpfxsy D Iqxe Ag Dogk Additional equipment: Driver's airbag, exterior mirrors with wide-angle, load compartment floor plate, on-board computer, rear wing doors without windows, body/build type: standard high-roof van, padded headrests, fuel tank: 90 liters, load compartment partition wall, engine 2.0 L - 120 kW Blue-HDI FAP CAT, radio pre-installation, 4 speakers, wheelbase 4035 mm, spare wheel in standard tire configuration, low-emission according to Euro 6 emission standard, rear disc brakes, sliding door right for cargo/passenger compartment, SCR system (AdBlue technology), side protection strips, seat upholstery/trim: fabric, seats in cab: double passenger seat (incl. automatic seat belt), seats in cab: driver's seat with armrest, height adjustable, seats in cab: driver's seat with lumbar support, permissible total weight 3.5 t The vehicle is in very good condition! Service booklet, new timing belt Financing possible via Santander Bank

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A Pjdsw Tq Iwspfx Ag Degk

Condition: good (used), functionality: fully functional, machine/vehicle number: FN501850, Year of construction: 2015, operating hours: 708 h, load capacity: 3,500 kg, lifting height: 4,000 mm, load center: 500 mm, fuel type: gas, fork length: 2,000 mm, overall weight: 4,800 kg, total height: 2,700 mm, total length: 5,000 mm, total width: 1,300 mm, JUNGHEINRICH TFG 435 400 ZT LPG forklift truck Note: The item must be collected, bindingly, between 05 and 07 May 2026 on a date to be mutually agreed. FCA D-74385 Pleidelsheim – loaded onto truck Pjdpfx Ajyuvw Hsg Dsgk

Year of construction: 2026, condition: used, New: Yes Empty weight: 90 kg Dimensions of cargo space: 60 x 40 x 100 cm CE mark: yes Serial number: DPX-27508 Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information Pgjdoy Dnvzepfx Ag Dek Automatic Transfer Switch - ATS Panel - ATI Panel 1250 Ampere - Applicable for generators up to 435 kVA

Condition: used, mileage: 259,267 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * 1st hand * Maxi L4 * Tow bar * Air conditioning * Double cab * 7 seats Special equipment: Passenger airbag, exterior mirrors electrically adjustable and heated, both, driver assistance system: emergency brake assist, reinforced rear suspension, navigation system with color display, USB interface Pgedpoy Aclnjfx Ag Djk Other equipment: Driver airbag, on-board computer, overhead shelf / roof console at front, body/construction: standard double cab flatbed, padded headrests, fuel tank: 90 liters, engine 2.0 liter - 96 kW Blue-HDI FAP CAT, radio preparation, 4 speakers, wheelbase 4035 mm, spare wheel with road tires, low emissions according to Euro 6 standard, rear disc brakes, SCR system (AdBlue technology), side protection strips, seat cover/upholstery: fabric, seats in cab: double passenger seat (incl. automatic safety belt), driver's seat with armrest, height adjustable, driver's seat with lumbar support, gross vehicle weight 3.50 t

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Pedpjyng Agjfx Ag Degk Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, input voltage: 24 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 12 m/min, Equipment: CE marking, documentation/manual, Machine is running in production and is going to be available end of May. Fully functional in good condition. Psdpeyz Sbisfx Ag Dsgk

Condition: used, machine/vehicle number: 008417, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Psdpfx Aoy D Af Djg Djgk Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), functionality: fully functional, pre-milling unit glue station for granulate maximum working height 60 mm Pgsdpfsynizljx Ag Dsk guillotine for trimming edge band from roll precision end trimming unit milling unit for edge band excess from top and bottom of the panel profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2014 weight 1200 kg CE marking

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 Pgsdpjyyb Icsfx Ag Dsk PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,691 h, load capacity: 3,500 kg, lifting height: 3,500 mm, free lift: 150 mm, load center: 500 mm, fuel type: gas, mast type: duplex, construction height: 2,450 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), JUNGHEINRICH TFG 435 with 3,691 operating hours and fork positioner! Mast: standard Full cabin with heating 4 valves Psdpeyx U Ndsfx Ag Dsgk Fork positioner.