Used Asea Generator for sale (9,596)

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Dodpfxjxfrv Es Ad Nokl Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units - 2 vertical units - 4 front-mounted units (two on each side) Dkedpfx Asxrmptsd Njl

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Dkodpfx Aoy Av Rdsd Nel Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Dkedpov Uag Isfx Ad Njl

Condition: good (used), geared motor, electric motor -Speed: 68 rpm -Power: 0.18 kW -Design: B3 Dksdpfx Adjdaa Hlj Njl -Shaft diameter: Ø 24 mm Protection rating: Quantity: 1 piece available -Dimensions: 350/175/H190 mm -Weight: 14 kg

Condition: good (used), Electric motor, three-phase motor -Power: 15 kW -Speed: 2925 rpm -Shaft: Ø 42 mm Dkodpfx Aocm Slmed Nsl -Construction. B35 -Protection class: IP 54 -Dimensions: 595/350/H375 mm -Weight: 89 kg

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Dedjyl Nntjpfx Ad Nskl

Condition: used, Electric motor Manufacturer: Asea Type: MBRF 25 Power kW: 75 RPM: 1470 Dkjdjyi T Thopfx Ad Nol

Condition: used, machine/vehicle number: 6502989, overall weight: 2,800 kg, output current: 288 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 160 kW (217.54 HP), nominal power (apparent): 160 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, ASEA generator from a Swedish manufacturer, in excellent condition. Djdpfxsvwi Ugo Ad Nekl

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: ABB ASEA, double hydraulic unit -Hydraulic pump 1: Motor ABB 3 kW 150 bar Dkodpfx Adowxr N Ij Njl -Flow rate: 15 l/min, with pressure switch, pressure accumulator and filter -Hydraulic pump 2: ASEA motor 0.37 kw / 100 bar / 0.8 l/min -Hydraulic tank: with temperature/level indicator -Individual components: see photos -Dimensions: 785/570/H785 mm -Weight: 203 kg

Condition: good (used), Electric motor, three-phase motor -Power: 15 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 580/350/H395 mm -Weight: 95 kg Dksdpjcvnagofx Ad Nsl

Condition: good (used), Electric motor, three-phase motor Dedpfx Aewz D Hwsd Nekl -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 -Number: 2x electric motor available -Price: per piece -1x: Fan cover defective -Dimensions: 420/247/H300 mm -Weight: 40 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -110 V 60 Hz -SK: 4120116 Dodpfx Aeb A Nzted Nekl -Quantity: 14 pieces available -Price: per piece -Weight: 0.5 kg

Condition: used, Electric motor, three-phase motor with 2 speeds -Power: 1.6/2.2/6.6 kW -Speeds: 730/980/1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP 54 -pole changing -Dimensions: 595/385/H310 mm Dkedpfx Adod I Amce Nel -Weight: 105 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 61.3 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 28 mm -Protection class: IP 54 -Dimensions: 200/200/H425 mm Dodpoc Np Awsfx Ad Nekl -Weight: 26 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 28 mm -Protection class: IP 54 -Dimensions: 425/160/H220 mm -Weight: 21 kg Dksdpfjcwuvrjx Ad Nol

Condition: used, Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.7-5.5 kW -Speed: 190-1500 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 22 -external fan Dsdpfxsd Nfdtj Ad Nekl -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Condition: used, Gear motor, electric motor -Speed: 30 rpm -Power: 0.45 kW -Construction: hollow shaft angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 Dedpfx Adsct Tyqe Nekl -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 375/160/H275 mm -Weight: 12.5 kg

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Dkedpox U Tgmsfx Ad Nsl The unit looks as good as new. The system was only in operation for a short period.

Condition: used, Hydraulic station Djdjwmqc Nspfx Ad Nekl Manufacturer: ASEA Made in: Sweden

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Dkjdpfxew U N Daj Ad Njl

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Djderuakgopfx Ad Nekl Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Dksdsxaqa Sopfx Ad Nsl Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Dkodpfoxdfazex Ad Njl Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Dodpfx Adsxdfa Ue Nekl Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs