Used Assembly Station for sale (8,585)

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Dkodpfx Ajzbvmhskmsu Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: good (used), WSM Stationary Screw Unit, Assembly Station Assembly of components for car radios and navigation systems, as well as testing of these components. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with interlocking (locking). The doors are locked in automatic mode and can only be opened when the automatic mode is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic mode cannot be started when a door is open. Functional Sequence The station is loaded with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a process flow for a WT (test object). In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled unit in Station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector Djdpjibichefx Akmjku - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.3 - Lowering the light shield and making contact, moving the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD + CD slots and buttons - Functional test of the CD eject button - Lowering the WT onto the belt > continue If errors occur during the test, they are displayed on the display and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic mode, the WT is tested again in the station. If no repair is possible (e.g., screwing error), the WT is marked as NIO (Not In Order) in the control system and is no longer processed. Manual NIO marking and removal are also possible. More new and used assembly stations - find them in our shop! International shipping costs on request!

Year of construction: 2003, condition: good (used), Schatz Advanced Assembly System Schatz Assembly System Length: 5450 mm Height: 3000 mm Roll-off cradle Dksdoihiiispfx Akmou Length: 5020 mm 2 x Demag cranes 1 x Liftket electric chain hoist 1 x Schatz 907500 System without Advantech TPC-1260 TE touch panel PC More assembly systems in other sizes – new and used – can be found here.

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. This machine is characterized by an extremely robust mechanical basic structure and is ideal for production facilities, workshops, or as a perfect foundation for a modernization project. Technical data (according to the nameplate): Dsdpfx Akjzni Rxemeku Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: Electrical connection: 380 V (CEE plug available) Pneumatic connection: 6 bar "Everything from a single source: We will gladly offer you suitable financing for your project." You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), ZIM Hülsta Carcass Uprighting Device This device is used to upright and transport assembled carcasses. Carcass uprighting devices are typically used with carcass presses that have a continuous feed system. It simplifies handling when setting up large workpieces. Transport and assembly device within a carcass assembly line. Behind a continuous-feed carcass press, the pressed carcasses are placed on their backsides using this device. Assembly work on the underside can thus be performed. Manufacturer: ZIM Hülsta-Werke Type: Carcass Uprighting Device Dimensions: Roller conveyor L x W x H: 2800 x 900 x 800 mm Roller width: 800 mm Tilting area: L x W 1000 x 900 mm Dodpfx Akjvdb Ixjmeku Mains supply: 3x400 V AC Connected power: 2 kW More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Dedpfezcqxnjx Akmsku Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Condition: good (used), Assembly station, assembly device, vacuum assembly device Dkedpetrzplefx Akmeu -Manufacturer: reis, mounting station with suction cup holder -Control: Siemens simatic -Suction cups: 6x Ø 165 mm -Platform: stroke 300 mm -Previous use: Production of solar panels -Individual components: see photos -Number: 2x mounting device available -Price per piece -Dimensions: 2620/1860/H1210 mm -Weight: 2000 kg/pc.

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Djdpfxjytx Urj Akmjku Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: new, Just the right thing for flexible operations. Our small lifting table Pegasus is very maneuverable, versatile and thanks to thefoot pedal easily adjustable to their ideal working stable sheet metal plate allows you to easily deposit evenup to 300kg heavy workpieces. If they need another plate, they can also put on the very simple.4 stable polyamide castors, two of them with locking brake, provide ideal handling. A safety device against sagging of thetable gives them the necessary sense of ner bench made of solid beech with dovetail zinc coating represents the strongest connection that ensures maximum stability andlongevity of the planer bench. The front collet is 520 x 70 rear collet is equipped with a special spindle that guarantees the completely precise and stable guidance of the collet. On the rear tong there are 3 holes for bench hooks and another 13 holes are drilled in the planer bench plate. The 110 mm high front side is provided with 2 bench hook holes, which together with 2 holes in the rear tong can be used forvertical clamping of workpieces. Part of the planer bench is the drawer for storageof tools. Along the rear part of the planer bench is the hatchet tray, which can be used as a shelf, for the currently unusedtools and material remains or for quick hnical data:Lifting table:Load capacity: 300 kgUseful stroke: 610 mmOverall height: 400 mmFrame: 970 x 590 mmGes. Height: 1010 mmWeight: 85 kgWorkbench:Overall length: 1,700 mmWorktop length: 1,485 mmOverall width: 790 mmWorktop width: 620 mmWorktop thickness: 50 mmWeight: 90 kg Dedpfx Akjvwfi Temjku

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey Dkedpezhnafsfx Akmeu

Condition: new, Ruchser standard offering with layout for a wooden window manufacturing process, including profiled glazing bead and screw-connected corner joints. ----- Daily capacity: approximately 30 windows Manufacturing process consisting of: Item 1.0 - Article 107850000 ----- 1 piece RU-PWD-H1600/130/4 profile rack, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cut-to-size pieces. 12 support arm pairs per column, permanently welded to the column, 2 center columns adjustable, clear distance between support arms 130 mm, depth of support arms per side 400 mm, support arms with felt padding, with 4 swivel castors, diameter 150 mm, 2 of which with locking mechanism. Item 2.0 - Article 10776000 ----- 1 piece RU-MSTR assembly station for frame hardware 3000 mm long, 600 mm wide 1 piece shelf for hardware 1 piece support table with felt padding Work height adjustable between 900 - 1100 mm (Without screw units) Item 2.1 - Article 6747 Dkodeytx Ulopfx Akmju ----- 1 piece guide rail with carriage, 3000 mm long Item 2.2 - Article 6308 ----- 1 piece balancer for tools, 3 to 5.5 kg Item 2.3 - Article 10778000 ----- 1 piece RU-STS-A screw feeder with automatic screw feeding system POWASERT, consisting of screw feeder and feeder unit ADS-MF4, complete with hose connections, screw feeder ADS 2445 RD with torque cut-off. Set to the screw guide used by the customer. Suitable for the following screw dimensions: Shank diameter: 2.4 - 4.0 mm Shank length 10 - 35 mm Head diameter 5 - 8 mm When ordering, information about the screw must be sent to the manufacturer's factory. Item 3.0 - Article 10782000 ----- 1 piece RU-EW-2S storage rack, double-sided Storage capacity max. 36 pieces of frame profiles in L-shape, screwed together, length 1200 mm, depth 800 mm, height 2200 mm, support beams with felt padding, 4 swivel castors, 2 of which with stoppers Item 4.0 - Article 10766000 ----- 1 piece RU-DR-1 rotary table with travel mechanism for frame assembly. Table with parking brake. Support platform with crossbars and one pull-out section each to the left and right with felt padding. Basic dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, work height 900 - 1100 mm adjustable Item 4.1 - Article 5360, permanently mounted tool storage 1000 x 400 mm for RU-DR-1 Item 4.2 - Article 6354 ----- 1 piece 3-meter travel rail for travel mechanism, rail 10 mm high Item 4.3 - Article 6454 ----- 1 piece travel mechanism with flanged wheels and parking brake Item 4.4 - Article 6788 ----- 1 piece corner screwing device, 1 pair of pneumatically height-adjustable clamping units for fixing the profiles at a right angle. Item 5.0 - Article 10383000 ----- 1 piece RU-DK-T14/34 rotary tilting table with pneumatic tilting mechanism. Work platform with 4...

Year of construction: 2006, condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, Dkodpfjfw Rwmex Akmsu -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Condition: excellent (used), Assembly frame with rubber support Dedozcqqqepfx Akmoku Manufacturer: EDER + MÜLLER Height adjustable: 800 - 950 mm Work surface size: 1800 - 2800 mm diagonal Weight: 60 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Vacuum with pump and 3 suction platesused, good conditionmake Schmalztype PVT-3-SPL-300x100-VE SEG 4vacuum generator ejector SEGoperating pressure 5 barload capacity approx. 90 kgadjustablewith vacuum pump pneumaticsuction plates 3 piecessize 300 mm x 100 mmswivelingspace requirement approx. 1200 mm x 600 mm x 900 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Dedpevwf D Rsfx Akmoku

Condition: used, used, good conditionsupport surface 1350 mm x 1600 mmwidth max. 2900 mm extendable- hinged 90°tilting device pneumaticclamping cylinder for workpiece clamping 2 piecesmobilestorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as viewed,without guarantee and warranty Dkedovwfxnepfx Akmsu

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Dkedpfezwhaqjx Akmju Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. In the folded position, the open angle is approximately 32° vertically.

Condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks Dksdpfxscm I T Tj Akmou -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Dodpfx Aox H Al Askmeku Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens Dkedpfxsb Tmrvj Akmou 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform Djdpfsyzh Ulsx Akmjku - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones Dkodpfozc N Axsx Akmou 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Dksdpfezc N H Djx Akmou Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: good (used), Siegmund System Perforated Table including Silverline Profile Processing Station For sale is an extremely robust, combined industrial workstation for metalworking, jig and fixture construction, or precise profile manufacturing. The system consists of top-quality components: 1. Siegmund System Perforated Table (base) - High-precision, extremely warp-resistant, and solid welding and clamping table from the world market leader, Siegmund. - The perforated system (including perforation on the side panels) allows for flexible and repeatable positioning of stops, clamping bolts, and angles. 2. Silverline Clamping & Processing System (assembly) - Solid upper structure with precise linear guides for longitudinal movement. - Two parallel-arranged, yellow motor heads (milling/drilling units) for simultaneous or staggered processing steps. - Three heavy-duty, horizontal clamping bars securely fix workpieces from the rear against the stops, ensuring material protection. 3. Pneumatic Comfort Control Dodpfx Asztawgekmsku - Ergonomic control panel on the front with a 5-way numbered lever control. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge and safety emergency stop switch. - Powerful, central electric motor for the mechanics/hydraulics. Dimensions: Tabletop: 2000 x 1000 x 200 mm Table height: approx. 900 mm, height adjustable Overall dimensions: 2420 x 1400 x 1580 mm This offer is for one Siegmund System Perforated Table. "Everything from a single source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Max height workable: 250 mm Dodpou H R Hmjfx Akmoku

Condition: used, For sale is a professional, industrial-grade painting station built with components from the renowned brand GRACO. The core of the system features two Endura-Flo™ 4D350 high-pressure pneumatic diaphragm pumps. These pumps are characterised by a best-in-class pressure ratio and exceptionally low fluid pulsation. Additionally, the station is equipped with two advanced Graco DataTrak™ control and monitoring panels, which control pump operation in real time, count cycles, and protect the system from running dry. The entire assembly is mounted on a heavy-duty, factory steel frame (stand). Technical Specifications: • Manufacturer: GRACO (USA) • Pump Model: Endura-Flo 4D350 • Quantity: 2 pumps included in the set Djdsz Hw Aqopfx Akmsku • Pressure Ratio: 4:1 • Displacement Per Cycle: 350 cc (350 cm³) • Monitoring System: 2x Graco DataTrak (electronic control and runaway protection) • Compatible Fluids: Solvent-borne and waterborne paints, varnishes, lacquers, catalysts • Overall Dimensions of the Station: 152 x 237 x h=132 cm