Used Atf 35/25 for sale (25,476)

Year of construction: 2012, condition: used, A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible. Nedjzwpglopfx Ah Dewk

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Nwedpfx Ahsy Rnqfo Dek Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Year of construction: 2017, operating hours: 800 h, condition: like new (used), functionality: fully functional, working width: 250 mm, For sale is a very compact and flexible dual-wave soldering system, type ATF 13/25, from the German quality manufacturer ATF. Without solder pot filling. Automation Technology GmbH (Collenberg). Nwsdpfx Ajzku Rcoh Dok Very compact soldering system, can be operated in an office environment. The system does not require a compressed air connection or explosion protection. Ideal for small series production. Footprint without infeed and outfeed: 1600x850 mm Year of manufacture: 2017 Connection value: 400V/25A 14 kW Weight: 190 kg (without solder) Process width: 250 mm, maximum PCB size: 470 x 250 mm. With extended infeed and outfeed (770 mm each) Accessories: 4 pcs soldering frames, extended with center supports 1 set of various hand tools (hydrometer, spoon, spatula, etc.) The system was only operated sporadically, approximately 6 times per year for half a day. Therefore, it is in like-new condition. Since the system was used with only one soldering wave, the second solder pump is still unused and included in its original delivery condition. Self-dismantling and pickup only! No shipping possible. Price negotiable.

Condition: used, machine/vehicle number: 10976, 3-blade rotor 2 rows of stator blades Nwedpfx Aheyr Tizo Dok Rotor diameter: 350 mm Rotor width: 250 mm Inlet cross-section for profiles: approx. 250 x 100 mm Machine in noise-protection enclosure

Condition: as good as new (ex-display), Sodium Chloride 35 Pack each one is 25 Kg Nsdjqyynyepfx Ah Dewk

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Nodpfx Aheznv A Ue Dowk Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: used, Technical specifications: Planer: Max. planing width: 350 mm Cutterhead diameter: 110 mm Number of knives: 3 Table length: 1760 mm Motor power: 2.2 kW Voltage: 380 V Thicknesser: Max. planing width: 350 mm Max. planing height: 230 mm Nedpfjziaytsx Ah Djwk Saw: Max. saw blade diameter: 250 mm Work table with carriage Motor power: 2.2 kW Voltage: 380 V Overhead router: Spindle diameter: 40 mm Manual spindle height adjustment Spindle height: 120 mm Motor power: 2.2 kW Voltage: 380 V Overall dimensions: Length: 2000 mm Width: 1300 mm Height: 1250 mm

Condition: used, empty load weight: 4,580 kg, maximum load weight: 30,420 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2006, loading space volume: 25 m³, suspension: air, tire size: 385/65R22,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, MB axles disk braked, air-suspended, 1st and 2nd axle liftable, lifting+lowering, ABS (anti-lock braking system), EBS Body: aluminum transport tank approx. 25cbm. 3x 9t axles, axle 1 and 2 liftable. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nodpfx Ahovhk Agj Dewk - .

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 Njdpfx Ahsmqk Sve Djwk General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), We are offering a used shelf connector for sale. Nodpfx Asd Tyhvjh Dewk The scope of delivery includes: 01x Used shelf connector Material color: Sendzimir galvanized Shelf spacing: approx. 150 mm Profile: approx. 35 x 25 mm Weight/piece: approx. 0.214 kg/piece 02x Hex head screws, M10 x 35 02x Hex nuts, M10 02x Washers, M10

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: Nodpfomqldkjx Ah Dewk 01x shelf connector, used for shelf distance: 360 mm total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional Nodpfx Aowxvadsh Dswk You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW Nwjdpfs Dqaqox Ah Dok weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: used, functionality: fully functional, Year of construction: 1992, load capacity: 8,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, fork length: 2,500 mm, drive type: Diesel, Sideloader Mast type: Standard Technical condition: good Nwsdpfx Aou Aczuoh Dek

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Nwedpovr U Syefx Ah Dek The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Year of construction: 2019, condition: ready for operation (used), Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible. Nedpfxozcyrde Ah Dewk

Condition: ready for operation (used), Brinkmann TC 25 / 810+100 submersible pump, serial number: 0313002815-19535001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nwedji D Hmhspfx Ah Dok

Condition: used, Surface grinder MÄGERLE MFP-125-35 Nwjdpfxoy Tzcmo Ah Dok

Condition: ready for operation (used), Year of construction: 2001, Press brake manufactured in 2001. This IMAL SMALL 835/25 features a press force of 25 tonnes and a bending length of 835 mm. It is equipped with Delem DM51 CNC control for enhanced precision. If you are looking to get high-quality bending capabilities, consider the IMAL SMALL 835/25 machine we have for sale. Contact us for further details. • Pressing force: 25 tonnes • Bending length: 835 mm Nwedpfx Ahezrw Dzo Dsk • Alternative working-length indication: 830 mm

Condition: used, mileage: 6,380 km, power: 185 kW (251.53 HP), first registration: 09/2024, fuel type: gas, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, loading space volume: 28 m³, loading space length: 5,360 mm, loading space width: 2,470 mm, loading space height: 2,100 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * EuroCargo 120 ELG 25 P beverage transport vehicle with BÄR 2,000 kg tail lift * BÖSE side curtain with 4-point load securing system VDI 2700 * NEW vehicle with day registration * ORIGINAL approx. 6,380 km * Permissible total weight 11,990 kg = payload approx. 5,260 kg * NG natural gas tank 480 liters * 72 kg at 200 bar filling pressure * Range approx. 400 - 550 km depending on driving conditions * Vehicle number for customer inquiries: 4782 * Differential lock, rear axle * Xenon headlights * Lane keeping assist * Navigation system * Air conditioning * Parking assist camera * Bi-xenon headlights * Automatic transmission * Environmental badge (green) * Air suspension * Tail lift * Electronic Stability Program (ESP) * EBS * Trailer coupling * External sun visor, transparent * Multifunction steering wheel * Hill start assist * Cruise control * Particulate filter * Emergency brake assist * Multifunction steering wheel * Electric windows * On-board computer * Anti-lock braking system (ABS) * Two-seater * Power steering * Electric side mirrors * Bluetooth * Well-maintained according to service schedule * LED daytime running lights * 2/3-door No liability for printing and typographical errors Sale only to commercial customers Errors and prior sale reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase law. The description in the purchase contract shall prevail. * TOP SERVICE + QUALITY * We can gladly provide you with a LEASING/FINANCING/RENT-TO-OWN offer Warranty insurance possible upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our partners on site * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. Nwedpozp Sp Hsfx Ah Dok * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 34,100 km, power: 92 kW (125.09 HP), first registration: 10/1957, fuel type: diesel, empty load weight: 5,670 kg, maximum load weight: 1,820 kg, overall weight: 7,490 kg, tire size: 8.25-20 EHD, axle configuration: 4x4, energy efficiency: F, CO₂ emissions: 601 g/km, color: red, driver cabin: other, gearing type: mechanical, number of seats: 6, total length: 6,450 mm, total width: 2,350 mm, total height: 2,800 mm, front tire size: 8.25-20 EHD, rear tire size: 8.25-20 EHD, Equipment: all wheel drive, Vehicle location: Bovenden, Klöckner H-Deutz TLF 16/53, TLF 16/25 A3500/6 Year of construction:1957 The sale to tradesmen or export is subject to 19% VAT. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwodpfxevhlhdj Ah Dsk - .

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Nedpfxoxk T Efs Ah Djwk Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - Motor: 15 kW - 400 V - 3,000 rpm Nedpfszk N Upsx Ah Dswk - Extraction nozzle diameter: 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, pressing force: 250 t, overall weight: 27,000 kg, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Press force: 250 tons Bending length: 3,550 mm Frame width: 3,050 mm MACHINE DETAILS Dimensions & Weight Footprint: approx. 4,500 x 2,000 x 3,400 mm Njdpfxezk Ez Es Ah Dewk Machine weight: approx. 27,000 kg

Condition: good (used), Year of construction: 2017, operating hours: 3,584 h, mast type: telescopic, color: green, General information Mileage: 39.208 km Drivetrain Make of engine: Nissan Weights Empty weight: 3.375 kg Functional Working height: 2.500 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 65 Rear tyres remaining : 65 Delivery terms: CIP, EXW Max. horizontal reach: 1900 m Latest inspection: 2026-05-01 Production country: DE Additional information Please contact Michael Overmeer for more information Klaas Theo 25 aerial work platform mounted on a Nissan Cabstar construction year 2017 with 3.584 hours and only 39.208 mileage. Last inspection at Klaas 05-2026. Machine is equipped with automatic leveling of the support legs and has a unique sideways range of 19 meters and a height range of 25 meters. Changes and typographical errors reserved. Nwodpfjzh H Hqsx Ah Dek