Used Athader Slitting Line for sale (10,087)

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Fjdpfx Ajtiy Nteagjph Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Fsdpfern Sqhsx Aagjph Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Fpodeihf Ufepfx Aagsh Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Fpjdolwtzyepfx Aageh Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS Fsdpfethg Diox Aageph STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Fsdpfx Aeihf Twoagoph Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: excellent (used), Year of construction: 2020, operating hours: 97 h, functionality: fully functional, machine/vehicle number: 098 / SCS, # KRASSER Centurio 1250 – Year of Manufacture 2020 – Slitting Line with 5 Automatic Knife Pairs, Leveling Unit, and Guillotine Shear Fjdpfx Aaezcunaegoph For sale is a very well-maintained KRASSER Centurio 1250 from the year 2020. The machine was taken from an operational business and is in very good, immediately operational condition. It is ideally suited for sheet metal workshops, roofing companies, facade builders, and sheet metal processing companies for the economical processing of coil material. A special advantage: the machine recently underwent a comprehensive service by the manufacturer, Krasser, as part of the take-back process. ## Technical Data * Manufacturer: KRASSER GmbH, Austria * Type: Centurio 1250 * Year of Manufacture: 2020 * Machine Number: 098 / SCS * Power: 32 kW * Connection: 3 x 400–488 V AC, N + PE, 50–60 Hz * Weight: approx. 3,600 kg ## Equipment * 5 automatic knife pairs * Integrated guillotine shear * Leveling unit * Robust industrial design * High production output * Precise slitting results The KRASSER Centurio 1250 impresses with its high manufacturing quality, reliability, and economy. The extensive equipment enables efficient and precise processing of coil material while simultaneously reducing setup times. The machine is immediately available and ready for sale. Inspection is possible by appointment.

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Fpedpfx Aajtn Diogeh 20 - 300 x 0,4 - 3,5 mm

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Fjdpfx Ajgnygljagjph

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm Fodpfogrug Rex Aagjph edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm coil weight: 6 t mandrel Ø: 508 mm Fpjdpfxjnfu Icj Aagoh No. of slits: max. 9

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm Fsdpfx Aaslilgcogoph coil weight: max. 1 t

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t Fjdpfolilfbox Aagsph

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm Fpedsgnc H Depfx Aagsh strip thickness: 0,4 - 2 mm coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Fodpfoyi U Ugex Aagjph Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: used, 1520mm x 6.5mm x 25 TON PEKRUN MASCHINENFABRIK LOOPING PIT SLITTING LINE Manufacturer: Pekrun Maschinenfabrik Coil entry width: 360 - 1520mm Coil ID: 500 - 750mm Coil OD: 1990mm Material thickness: 1 - 6.5mm Maximum coil weight: 25ton Slitting shaft OD: 260mm Line speed: 110m/min Includes: Siemens S7 PLC system Kurschat laser thickness measurement system Tilgert Edge guides Scrap choppers with automated adjustment Fpjdpfjzafccox Aageh BKM crop shear Snubber rolls Seperation roll arm Pit Coil cars 2 - Arm Turnstyle Large amount of tools

Condition: used, 420 X 4MM BKM SINGLE-PIT HIGH CARBON STEEL SLITTING LINE Manufacturer: BKM (Germany) Line Direction: Right to left Fsdpfozad Tyjx Aagjph Line Speed Range: 0 - 200mpm (656fpm) - continuously adjustable Strip width Range: 15 - 420mm (0.595 - 16.5") Thickness Range: 0.3 - 4mm (0.01181 - 16.5") Material Specifications: Cold Rolled Steel Yield Strength: >750 N/mm² Complete Line with the Following Components: Entry Pit Type Coil Car 6 Ton Max Coil Weight Mandrel Uncoiler 40KW DC drive Coil ID: 500mm (20") Coil OD: 1950mm (77") 6 Ton Max Coil Weight Hydraulic Expansion Hydraulic Pinch Roll Arm Peeler Table NEW 2024 (MGK-Maschinenbau, Germany) Entry Felt Brake, Hydraulic Entry Double Sided Edge Guides, manually adjustable Slitting Head 58KW DC Drive Hydraulic Opening/Closing system Height Adjustment via Electric Spindle Drive 100mm (3.937") Shaft OD Tooling OD Range: 262.00mm - 223.00mm (10.315" - 8.778") Scrap Guiding Rolls at Slitting Head Exit Scrap Winder 1 Set of Deburring Rolls - Driven/Non-Driven Pit after Deburring Rolls - 3m deep Tension Stand with Entry Roller Table, Driven Deflector Roll, Pneumatic Felt Brake and Hydraulic Crop Shear Recoiler 75KW DC Drive 5.5 Ton Max Coil Weight 400 + 500mm Mandrels (15.748" - 19.685") Max. Coil OD: 1550mm (61.023") Over Arm Separator Full Hydraulic Drum Push Off Plate Exit 2-Arm Turnstyle Type Coil Car 5.5 Ton Max Coil Weight Machine Installed and under power!!! Complete Line with Hydraulics, Electrics , Controls, Drawings, Tools

Year of construction: 1987, condition: good (used), Manufacturer - Cams Shefield Year - 1987 Speed - up to 80 m/min. Width of sheet - 1250 mm Thicknes - up to 6 mm Coiler capacity - 12 tons Fpodsgk Nu Hspfx Aagoh

Condition: good (used), Year of construction: 2017, Modular line for unwinding, slitting, and cutting to length. Industrial processing of electrical steel sheets into small laminations for transformer manufacturing. Fpjdpfx Asy Tcw Eeagsh Function: unwinding, slitting, and cutting to length.

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm Fpsdpfsy Nypksx Aagsh mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: used, Year of construction: 2002, For sale: a professional combined coil metal processing line by Finnish manufacturer Macring / Sintech, manufactured in 2002. This line is designed for uncoiling, leveling, longitudinal slitting, sheet cutting, and recoiling of coiled metal into smaller coils. The equipment is suitable for precision cutting of metal up to 1500 mm in width. The machine is currently dismantled; however, all connection elements are labeled, which makes recommissioning and assembly easier. The line is operated via a hydraulic system. Line configuration: - Uncoiler – 8 T - Metal leveling segment - Longitudinal slitting unit - Spare slitting knives - Sheet cutting guillotine - Braking and separating segment - Turnstile with separator - Recoiler – 8 T - Control panel - Electrical cabinet - Lifting/lowering table - Safety fences Technical specifications: - Maximum metal width: 1500 mm - Maximum coil weight: 8 T Fpjdpoy N Sqgsfx Aagjh This equipment is suitable for sheet metal processing as well as the production of ventilation, roofing, façade, and other metalworking products. If you have any additional questions, we will be happy to answer them.

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Fedpfx Aajyzbzregoph Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; Fpsdpfxswd E N Ej Aageh 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Fpjdpfx Asxlcp Neagsh Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, Year of construction: 2022, functionality: fully functional, nuSLIT STRAIGHT PROCUT PRINT Year of manufacture: 2022 – factory reconditioned Manufacturer: Forstner Features: - Control system: Siemens SPS-F3 - Speed: 45 m/min - Standard entry shaft Fpjdpfx Ajwbh S Reagsh - Standard entry table Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitter knife pairs: 5 pairs - Slitter knife type: Stainless steel Cross cutting: - Sectional shear (PROCUT) – waste optimization through step cuts - Shear knife type: Stainless steel - Motorized sheet shear discharge Incl. film unwinding device with fully rubber-coated feed rollers Labeling machine: - Automatic labeler Software: nuIT Connection