Used Ati Ati Portsens111 Gas Leak Detector for sale (7,100)

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Pjdpfjxhfqbjx Afljgp Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished) Psdpfx Afjxv Dh Isljgp

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. Pgodpezixy Esfx Aflsp The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Leak test device/pressure test device for ventilation ducts Manufacturer: Airflow UK Type: LM 1 Serial number: 125674 4 meters of hose Pgodpfxscxb Hae Aflop 230 Volts Documentation available

Condition: excellent (used), Beko Leak Detector measuring device in very good condition. Pedpovdx Snofx Aflsgp

Condition: used, Helium Leak Detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Connection: 230V Delivery time: in stock (subject to prior sale) Pgsdpfx Afec S D A Telep

Condition: ready for operation (used), GASTEC Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At GASTEC, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications. Podpjy D D Tcefx Aflogp

Condition: used, This listing is for a Drager Accuro Gas Detector Pump. The unit is in full working condition and is ready for immediate release. The Drager Accuro Gas Detector Pump is a robust and versatile manually operated bellows pump, tailored for effective gas detection in challenging environments. Key Features: Manual Operation: Designed for manual use, this pump requires no external power supply, making it ideal for potentially explosive atmospheres where electrical equipment may pose a risk. One-Handed Operation: Its ergonomic design allows users to operate the pump with one hand, facilitating gas detection in confined or hard-to-reach spaces, such as narrow pipelines or cramped industrial areas. Calibrated 100 mL Sample: The pump accurately draws a 100 mL sample through the gas detection tube, ensuring precise measurements for a wide range of gases. Pressure-Controlled End of Stroke Indication: This feature provides a clear signal when the sample has been drawn, enhancing user confidence that the measurement is complete and accurate. Compatibility: The pump is compatible with over 500 different short-term gas detection tubes, offering extensive versatility across various applications. Benefits: Fast Measurement: Users can perform gas measurements quickly, which is critical in time-sensitive situations such as emergency response or environmental monitoring. Reliable Measurements: The design ensures dependable operation, even in difficult-to-access locations, making it suitable for a range of industries, including manufacturing, construction, and environmental science. Cost-Effective: The manual operation and compatibility with numerous gas detection tubes provide a budget-friendly solution for regular gas monitoring without needing elaborate electronic equipment. Easy to Use: Psdjxxy Txspfx Aflsgp Minimal training is required to operate the pump, making it accessible to a broader range of users and reducing downtime. Applications: Industrial Safety: Ideal for monitoring gas levels in manufacturing plants, warehouses, and construction sites. Environmental Monitoring: Useful for assessing air quality in potentially hazardous or remote locations. Emergency Response: Essential for first responders evaluating hazardous gas situations in emergencies.

Condition: used, This listing is for the ATi f12/D Gas transmitter The units are in full working condition and ready for immediate use ATi F12/D Gas Transmitter Overview The Series F12D Gas Transmitter is designed for detection of a variety of toxic gases in hazardous area applications. In addition, it is also well suited for general-purpose environments where toxic gas measurement is required. The F12D is highly customizable, making it adaptable to nearly every fixed-mount toxic gas monitoring application. Podpfx Afoxv Dnzoljgp Key Features Extensive Gas Detection Supports over 60 interchangeable electrochemical sensors for detecting gases such as chlorine, ammonia, hydrogen sulfide, formaldehyde, nitric oxide, phosgene, and more. Auto-Test Function An integrated Auto-Test system uses a real gas sample to verify sensor function—eliminating the need for manual bump tests and ensuring operational integrity. Smart Sensor Technology H10 Smart Sensors store their own calibration data and can be swapped out in the field without recalibration, reducing maintenance time and cost. Rugged, Durable Design The F12D features a polycarbonate enclosure with stainless steel hardware, IP65 ingress protection, and is corrosion-resistant for harsh environments. Flexible Power Supply Options Operates on 12–24 VDC, 115 VAC, or 230 VAC to suit various site requirements. Communication Capabilities Offers RS-232/485 output and optional HART® or Modbus RTU for seamless integration into digital control systems. Highly Customizable for Diverse Applications The F12D offers broad configuration options, making it suitable for: Hazardous Areas (e.g., chemical plants, refineries) General Industrial Use (e.g., wastewater treatment, food & beverage, laboratories) Customization Options Include: Sensor Holder Styles Integral mount Remote mount (6 ft cable) Duct mount Auto-Test Gas Generators Available for chlorine, ammonia, hydrogen sulfide, sulfur dioxide, and others. Digital Interface Upgrades Optional HART and Modbus interfaces for advanced integration and data transmission

Condition: used, Year of construction: 2018, functionality: fully functional, Helium leak detection device. Pgedpfx Aoyt Sm Ueflsp

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake Pgsdpfxjxwvrue Aflep - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards. Pjdpfx Afsyq Rkyeljgp

Condition: used, functionality: fully functional, fuel type: gas, color: blue, axle configuration: 4x4, fuel: liquid petroleum gas (LPG), Year of construction: 2000, operating hours: 2,156 h, Equipment: all wheel drive, Iceresurfacer: + Dupon Podpjy Rqbgjfx Aflsgp + OK Matic + 4-cylinder VW gas engine + All-wheel drive + Hydrostatic drive + Snow tank + Water tank + Side broom + Augers / blades + Year of manufacture: 2000 + 2,156 operating hours Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 5,000 l, This offer consists of a new tank with the capacity of 5000 litre and a pump with a flow rate of 75 litre per minute. It is designed to store diesel or heating oil. We can also offer transport separately to a specified location. Pgjdpfx Aji A Hlfefljp Please contact us for more details.

Condition: new, Year of construction: 2026, power: 80 kW (108.77 HP), temperature: 230 °C, inner dimension length: 3,200 mm, inner dimension width: 1,400 mm, inner dimension height: 2,370 mm, total length: 3,960 mm, total width: 1,880 mm, total height: 3,370 mm, control type: PLC-controlled, Equipment: CE marking, Powder coating Oven (Oil/Gas) Internal dimensions LxWxH: 3200 x 1400 x 2370 mm External dimensions LxWxH: 3960 x 1880 x 3370 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 80 kW (1 burner) Maximum working temperature: 230C; Heat resistant recirculating fans: 1 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on one side Ready for 4 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features Pgedpsy Uxrnofx Aflop HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality Delivery in 2 weeks after payment WARRANTY: 12 month We can organise delivery accross the EU for speacial price. PRICES are EXCLUDING VAT. WE ARE LOOKING FOR SALES PARTNERS

Condition: new, Year of construction: 2026, temperature: 230 °C, inner dimension length: 3,800 mm, inner dimension width: 1,600 mm, inner dimension height: 2,270 mm, total length: 4,560 mm, total width: 2,080 mm, total height: 3,270 mm, control type: PLC-controlled, Equipment: CE marking, Internal dimensions LxWxH: 3800 x 1600 x 2270 mm External dimensions LxWxH: 4560 x 2080 x 3270 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 160 kW (2 burners in total) Maximum working temperature: 230 o C; Heat resistant recirculating fans: 2 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on both sided (tunnel) Pgjdey Ud H Ropfx Aflop Ready for 5 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners POWDER COATING OVEN FLOWSYNC Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality WE ARE LOOKING FOR SALES PARTNERS

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Pgedpfx Afjyuu Scjlep Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: used, Cylinders, bottles used for gas transport 20/40/50 L, 200/300 bar T50 steel gas cylinder, bottle 50 L 200 bar 288 pieces T40 steel gas cylinder, bottle 40 L 200 bar 288 pieces T23 steel gas cylinder, bottle 20 L 300 bar 288 pieces Pedeyfpg Nepfx Aflsgp All bottles are complete, empty and ready for export.

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen Pjdpfx Afstulh Iolsgp We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), Year of construction: 1986, Cryolor gas tank semi trailer for oxygen, nitrogen, argon cryogenic, carbon dioxide, LIN, LOX, LAR,CO2 Manufacturer: Cryolor, France Year of Manufacture: 1986 Type: EFM 17000 Pgedpfjwmmakox Aflop Total Capacity: 17,410 liters Tare Weight: 10,050 kg Gross Weight: 22,000 kg Working Pressure: 20 bar Test Pressure: 27.32 bar Tank Code: R 27.3BN Insulation: Vacuum insulated The tank is for the transport and storage of deep-cooled liquid gases such as nitrogen, oxygen, argon, or CO₂. Contact us for more information or to arrange a viewing.

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Working pressure: 3 bar Pump: yes Flowmeter: yes Pedpfxoittfne Aflegp We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Volume: 12000 L Pgsdperk Na Asfx Aflsp We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. We will be glad to answer your questions via phone and e-mail

Condition: new, - Dimensions: 910 x 860 x 550 mm - Internal dimensions: 610 x 610 x 170 mm - Weight: 51 kg - Power: 8 kW - Power supply: Natural gas + 230V~ electrical connection - Capacity: 4 pizzas with a 30 cm diameter - Professional oven, ideal for pizzerias with high demand - Designed to offer efficiency, safety, and stability - Fast heat-up thanks to its specially designed chamber Pgsdpfx Aey S R Ipsflsp - Stable temperature even with heavy use (frequent opening and closing) - High-precision safety thermostat for reliable adjustment - Bakery-style door for easy loading and unloading - Natural gas consumption: 0.844 m³/h - Thermal power: 6880 kcal/h

Condition: used, Year of construction: 2010, machine/vehicle number: 00100060311, Item No. 26090 Technical data: - Design: vertical - Max. operating pressure: 10 bar - Pressure vessel capacity: 270 l - Suction volume: 585 l/min - Delivery rate: 440 l/min Pgjdpfx Aozd T S Eofljp - Compressor speed: 1200 rpm - Drive: 400 V / 4.0 kW - Boiler diameter, approx.: 600 mm - Space requirement, approx.: W 800 x H 1850 x D 900 mm - Weight, approx.: 150 kg

Condition: excellent (used), Year of construction: 1993, Gas tank used for CO₂ (carbon dioxide). Working pressure: 20 bar. Podpfx Afsy R Uq Sjlegp Year of manufacture: 1993. We also have in stock other tanks and trailers for different gases: oxygen, nitrogen, argon, hydrogen, helium, methane, ethylene, N2O, LNG, CNG