Used Ats Tanner Bundling Machine Banding Machine for sale (65,888)

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min. Itodpfx Ajvcyw Aonwjh

Condition: as good as new (ex-display), ATS banding machine US-2000 AD Sheet size 360x260/30 mm - Simple, efficient and compact standard machine - Wide range of different sheet sizes - High machine safety and easy accessibility - Height adjustable and powerful Itodpfx Ashk I Nmonweh - With digital control DCP 2000 The US-2000 AD is a mobile, compact and automatic machine. The wide range of sheet sizes allows an optimal adjustment to your product. To increase efficiency, we offer our customers special sheet sizes on request, in addition to the numerous standard dimensions (see reverse). The switchable, adjustable fixed length or soft tension enable not only taut but also gentle banding for soft products. The height adjustability and legroom allow working also in a sitting position.

Condition: used, Year of construction: 2001, ATS-CE 340/30 bundling machine Banding machine with temperature welding Band width 30mm Paper and film can be used as banding material Isdpfxevthwfs Anwoth Cooling time setting Extras: Jumbo dispenser 2x available. Price plus VAT EXW. All information without guarantee. Subject to prior sale. Dealer business. The sale is made without any warranty.

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, Itsdpfx Aowrp Hksnwsh product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: used, US-2100 - 75 mm Isdjwrp Inepfx Anwsth Increasingly wider bands are being demanded for the logistical and sales-promoting bundling of units. The US-2100 with its unique ultra-sonic sealing processes paper and plastic bands with a width of 75 or 100 mm. The bands offer plenty of space for printing marketing-related information. The machine is easily accessible, usable in small spaces, and offers high safety.

Condition: as good as new (ex-display), Year of construction: 2020, ATS table-top banding machine MS-420S Itedpshk I Hrofx Anwjh - Handy, mobile, immediately ready for use - High operator and service friendliness - Various product sizes can be processed - Save costs - Marketing with banding

Condition: used, ATS Tanner ATS-CE 340/30 Banding Machine Product Width: 1”-13” Isdpfxswlgz Ss Anwoth Product Height: up to 6” Speed/Cycles: 22-26 cycles/min. Performance: Up to 26 bandings per minute Band width: 30mm Voltage 115 V/50 Hz, 115 V/60 Hz Electrical Power: ca. 0.2 kW Weight: 25 kg

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Itedpfex R D Adsx Anweh Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Serial number – 001.041.10. Itsdpfxeyzxgfe Anweh Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Storage location: Supplier. Ijdsy Tpz Depfx Anwjth

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: Isdpjzcpixefx Anwsth - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,150 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Brandt-Homag KDF 220 Highflex edge banding machine, year of manufacture 2012 from a small carpentry business Last inspection: March 20, 2026 Type: KDF 220 Machine number: 0-261-20-6136 Wiring diagram number: 0-261-20-6136 Year of manufacture: 2012 Supply voltage: 400Y/230 Units controlled via the display Gluing unit: 2 x 2.2 kW Trimming saw unit: 2 x 0.18 kW Itsdpjzdb Ivjfx Anwoh Flush trimming unit: 2 x 0.27 kW Profiling milling unit: 2 x 0.35 kW WD 40 -additional function: structural base Radius draw knife Straight draw knife Edge thickness: 0.4 - 6 mm Fsbq Uvmsyy S Ade Rnjph Workpiece thickness: 8-60 mm Feed rate: 11 m/min Total power: 16 kW Length: 4150 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS Ijdpezc E A Ijfx Anwjth PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, Year of construction: 2008, machine/vehicle number: T/41288, functionality: fully functional, power: 19.5 kW (26.51 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 14 m/min, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2008. Type: TORNADO-TOP Iodpezd Dvzsfx Anweth Machine No.: T/41288 Year of manufacture: 2008 Power type: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 19.5 kW Control voltage: 24 VDC Maximum fuse rating: 35 A – 5×6 mm² Weight: If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1998, Used machine Itjdpfxjw Tfw Hs Anweh Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape edger manufactured by Herbert Meyer GmbH. Working width: 1800 mm, capable of continuous operation. The edger is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Iodpfx Ajzfi Hbsnwsth Supply current: 47.5 A Air supply: 6 bar

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: Itedpsy A I Sgofx Anweh - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 2018, machine/vehicle number: 431-92, Offer 26142 Technical data: - Cutting range at 90°: round 350 mm - Cutting range at 90°: flat 320 x 460 mm - Miter angle adjustable from 90° to 30° - Cutting range at 45°: round 280 mm - Cutting range at 45°: flat 350 x 280 mm - Cutting range at 45°: round 180 mm - Material feed system - Material support height approx. 740 mm - Saw band dimensions 4350 x 34 x 1.1 mm - Cutting speed adjustable from 25 to 90 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure continuously adjustable - Material clamping device Iodszc Izaspfx Anwsth - 3 roller conveyors, total length 1400 mm - 1 roller stand - Total motor power 400 V / 4.8 kW - Space requirement approx. W 1400 x H 1400 x D 2200 mm - Weight approx. 1900 kg

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 Ijdpfxeyrpmcj Anweth - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg - Details: - └ Description: Shaft of the drive rollers is loose with the machine - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 Isdpfx Ajym Rt Hsnwsth - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N Itodpfszc Agkex Anwjh - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Iodpfex Enqujx Anwoth Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. Ijdpfx Aoycqhconwoth The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Itjdpfswka N Tox Anwoh Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Itedpfx Anew I U E Aewjh Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term