Used Aumann Limbach Oberfrohna Gmbh 61457-00-00-00 for sale (87,966)

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Hnedpfxsxzug So Agyek Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: excellent (used), Year of construction: 2019, Laser source: Manufacturer: SYNRAD, a Novanta Company Model: FSV40SFD Hsdpjxzuimofx Agyjnk Type: V40 Series: firestar Year of manufacture: 2018

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Hnodpfx Agjxzuiaoyok

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Hsdpfx Aonxk Ixegyjnk

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 x Reich GmbH stainless-steel fixed table bandsaw for cutting typically used for cutting meat. Supplied with several spare parts and new blades. Model - Profi 400. Serial number - 400 1141. Date of manufacture - 2005. Size of blade - 3204mm x 16mm. Electrical requirements - 400 V / 50 hz / 3 phase. Hodpfx Aoyzxd Rjgyonk

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, The HT500Y-4 Mini Crawler Dumper is ideal for construction, landscaping, agriculture, and operations in confined spaces. Equipped with rubber tracks, a hydraulic tipper, and a powerful lifting function, this dumper offers excellent off-road capability, stability, and easy operation. The machine stands out for its compact design, high payload capacity, and reliable Briggs & Stratton petrol engine. ⚙️ Technical Specifications Engine & Drive: - Engine: Briggs & Stratton - Engine type: 1-cylinder, OHV, 4-stroke, air-cooled - Displacement: 203 cc - Power: 6.5 HP at 3600 rpm - Fuel: Petrol - Tank capacity: 3.6 liters Performance & Capacity: - Maximum payload: 500 kg - Unladen weight: 550 kg - Skip capacity: 200 dm³ - Tipping angle: 100° - Tipping system: Hydraulic Dimensions: - Machine dimensions (without pedal & skip): 1570 × 880 × 1450 mm - Machine dimensions (with foot pedal & skip): 2050 × 880 × 1450 mm - Skip dimensions: 1050 × 730 × 730 mm - Undercarriage width: 700 mm Lifting & Height: - Maximum lift height: 1020 mm - Maximum dumping height: 970 mm - Tipping clearance: 220 mm - Ground clearance: 110 mm Undercarriage: - Track width: 180 mm - Track ground contact length: 1000 mm - Track gauge: 520 mm - Turning radius: 1150 mm - Speed: 2.88 km/h - Gradeability: 20° - Rubber tracks for optimal ground traction ✅ Features & Benefits: ✔ Removable protective container ✔ Simple control via operating lever ✔ Folding stand-on platform for flexible use ✔ Very compact – ideal for tight job sites ✔ High stability thanks to tracked undercarriage ✔ Low-maintenance petrol engine Applications: - Construction & renovation - Landscaping - Agriculture - Stable & yard work - Material handling in challenging terrain Condition & Delivery: - New/unused, current production - Factory tested, ready for immediate use - Supplied with full standard equipment - Available from the second half of January - Europe-wide delivery by freight carrier available - Multiple units available upon request NET PRICE: €3,800 (RRP) Location: Rheda-Wiedenbrück Hnodpfsyqxw Ijx Agyok Viewing by appointment possible Save now – better price possible! Take advantage of our attractive offers. Enquiries welcome!

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive Hsdpfx Agsyzxfnjyonk - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Hnsdey Ah Rcspfx Agyjk Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: new, Year of construction: 2025, 2 tables are connected with tandem circuit for a common load of 5000Kg. Hnodpfok E Hmtsx Agyjk Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Lift table with a built-in chain conveyor. Load capacity 3 tons. Platform size approx. 3200 x1200mm. Technical description : Single scissor lift table type TT3000Bsp. - 3000Kg load - useful stroke 1600mm - Height 350mm - platform approx. 3200 x1200mm - Hydraulic unit drive with 2.2 KW motor - Switch up / down with manual switch Chain conveyor with 3 conveyor chains installed on the lifting table. - Length about 3200mm - Distance of the outer chains is 1100mm. - Drive gear motor SEW 1.1 KW - Drive is installed under the lifting platform. - Conveyor chains 3 x 1½ "roller chain German quality Hnjdpfxsfhbups Agyok - conveyor speed approx. 7m / min - Stable cover plates between the conveyor chains, accessible, closed form. - Electrical switching manually via manual button dead man's switch, with function forwards / backwards. - Construction height about 300mm. Base frame substructure with adjustable feet can therefore be driven under with forklift forks. Overall height: approx. 750 mm 1 pc = Lifting table + chain conveyor + floor frame.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,030 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Hnjdpfx Agogz Hx Doyok Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,950 mm, construction height: 300 mm, lifting height: 1,650 mm, load capacity: 1,500 kg, overall weight: 450 kg, total length: 2,500 mm, total width: 800 mm, table width: 800 mm, table height: 1,950 mm, table length: 2,500 mm, transport length: 2,500 mm, transport width: 1,200 mm, platform width: 1,200 mm, platform length: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 1,950 mm, space requirement width: 1,200 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, Technical description with the following main data: Load capacity 1500 kg static line load Hjdpfxouhphvj Agyonk effective stroke 1650 mm Overall height 300 mm Total height 1950 mm Platform length 2500 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 35 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Paintwork dust gray RAL 7037 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 450 kg

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards Hnodpfx Ajuvigpsgyjk 1 compartment for cleaning products 4 swivel castors with parking brake Load capacity: 400 kg Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Condition: good (used), functionality: fully functional, For sale the edge Polisher LÖFFLER GmbH Type: KSL-100 MG Good working condition Hnjdpfeyzkhzex Agyjk Grinding thickness: 10–200 mm Space required: approx. 13 x 2.5 m

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine can be inspected on site – please arrange an appointment in advance. Hedsy Atqnjpfx Agyenk

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Hnedpfeyz Sn Nex Agyek

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Hedpfx Agoy Aa Ugoyenk Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: excellent (used), Year of construction: 2001, overall weight: 16,000 kg, - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm - motor 180 KW - Weight 16 to Hjdpfx Aoyzn S Degyenk Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Year of construction: 2001, condition: excellent (used), - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm - Weight 16 to Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Hedpoyzn H Isfx Agyjnk Optional: drive motor, electrical control, infeed shaker.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for producing the following types of rolls: • Round stamped rolls Hnedpsy And Nofx Agyek • Elongated unstamped rolls • Sliced rolls • Twisted rolls • Kaiser rolls • Hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bun production line • Based on a rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual removal of products from the discharge conveyor • Stamping station with easily interchangeable tools; includes Kaiser and Corinthian stamping heads • Integrated elongation and flattening unit • Weight range: - For stamped rolls: dough piece weight from 25g to 75g – output: 1,800 pcs/h to 2,640 pcs/h - For unstamped rolls: dough piece weight from 80g to 125g – output: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 minutes at an output of 2,000 pcs/h • Dough types: wheat, graham, yeast, doughnuts • Single-person operation The machine is currently undergoing a general overhaul, which is expected to be completed by mid-June 2026. The photos show a similar bun line after a complete overhaul at Cream Serwis. If you are interested in pricing or would like to receive more photos, please contact us.

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. The system documentation is available in paper form and will be provided upon purchase. To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. What is the advantage of the SLC process compared to chrome plating: - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Hnodsyzdm Rspfx Agyjk Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware)

Condition: used, Year of construction: 2011, tank capacity: 956 l, GENERAL INFORMATION Design: vertical Year of manufacture: 2011 Notes: Technical documentation (including for the agitator) available for one of the two tanks Speed: 24 - 247 rpm Outer diameter: 1,050 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Max. permissible operating overpressure: 1.5 bar Top cover: removable / hinged top cover Agitator: Blade agitator Mounting type: mobile on castors Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, operating manual Cylinder temperature control: double jacket Nameplate: Vacuum: 0.5 bar Volume: 956 liters Double jacket volume: 83.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4401/04 (AISI316) Condition: unused Cylindrical height: 950 mm Last application: pharmaceutical Hedpox Dlqgjfx Agyenk TANK Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: 25 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Inotec GmbH TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator arrangement: centrally in top cover Agitator equipment: pneumatically driven motor

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, total length: 2,600 mm, total width: 600 mm, total height: 1,300 mm, motor manufacturer: Stöber Antriebstechnik, Equipment: type plate available, -KOM 3172- Offered here is a hinged belt conveyor from Frasch GmbH&Co. KG. The conveyor belt has breakout areas on the hinged belt, which can be seen in the photos. The functionality has been tested. This hinged belt conveyor was used for transporting plastic components. Type: FGA LU: 1900/LA: 1100xW:300 Power: 0.37 kW Hnodpfsx Ifqdex Agyjk Year of manufacture: 2016 Total length: approx. 2600 mm Total height: approx. 1300 mm Total depth: approx. 600 mm Usable belt width: approx. 265 mm Spacing between carriers: approx. 490 mm

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Hodpfoyx Exvox Agysnk

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) Hnodoyzhmbepfx Agyek For further information, feel free to contact by phone or message.