Used Automatic Basket Washer 2-In-1 for sale (113,775)

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: Crjdpsxm Ullsfx Adroh - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, WeldingDroid X2 Portable Model - For pipes and tank welding Ø 60 mm to 1.000 mm - Roller distance: 5 m (pipes could be longer) - Round welding - GTAW/ GMAW - AVC - Oscillation - Gaswalves: Purge & Trail - Coldwire+Hotwire - WLL max 2t - Remote Controller for programing - Control all parameters - Joystick for controlling (during weld) - Easy to program - Price contains one PurgeMaster - Welding machine (Kemppi MasterTig & Kemppi MasterM) optional, not included Credpfjwku Tyox Adroh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Cjdpsulpu Sjfx Adrerh Manufacturer - Canellitech Srl Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC850™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 85 cm and a 250-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC850™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC850™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 85 cm - Heated tank with a capacity of 250 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 180 kg - External dimensions - Open chamber (W x D x H): 135 x 110 x 195 cm - External dimensions - Closed chamber (W x D x H): 135 x 110 x 140 cm - Rotating basket diameter: 85 cm Crsdpeu Srrhsfx Adreh - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 250 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Csdpsw Hrrrjfx Adrerh Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min Crsdpfx Adeu R Urhsroh - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. STANDARD EQUIPMENT OF THE WASHER: * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system * Coarse mesh filter for insoluble contaminants (1mm mesh) Csdpoxnlpdjfx Adrjrh * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven Crjdpfow Rn Euox Adrsh ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 Csdpfx Aoulpmzedrerh 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Crodpfxjr I Ddks Adroh Manufacturer - Vigo Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotor line Loop1 & Loop 2, location: Trnava, Slovakia. We will gladly provide further technical documentation or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible, subject to payment of costs. Subject to prior sale, errors and omissions excepted. Crjdpjzy E I Defx Adrsh

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Csdpfx Aoy Hlkbodrsrh Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Csdoz Dta Tspfx Adrjrh Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational. Cjdpfx Aoy Hlvwodrsrh

Year of construction: 2026, condition: new, functionality: fully functional, Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. Advantage The soiled parts are radiated intensively with the hot lye from all sides in the rotating basket, driven by geared motor. After completing the cleaning process, the device switches off automatically. 1 pump arranged horizontally Specific output: 120 L/min 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design Crodpfxehct Eaj Adreh additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, driven by geared motor steam extraction screen plate with filter inlets made of stainless steel above the wash tank water indicator longer nozzle tube above and below 9 nozzles more than Mini 60 Technical data Tank capacity 80 l Basket diameter 600 mm Capacity 100 kg Temperature min. - max. 0-60 °C Dimensions (W x D x H) 945 x 830 x 1025 / 1640 mm Weight 60 kg Spray rate 7200 l/h Material Stainless steel Power supply 3,9 kW / 400 V / 50 HZ Nutzhöhe 380 mm Pumpendruck 2,4 bar

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Credpfx Aeth Taaedreh Inspection is very welcome.

Condition: used, Year of construction: 2004, functionality: fully functional, HOLZ-HER Sprint 1321-2 STUF Edge Banding Machine For sale: a high-quality HOLZ-HER Sprint 1321-2 STUF edge banding machine, which is part of a production facility for manufacturing panel furniture. The machine is located in Labin (Istria, Croatia). Price: €5,500.00 If you are interested in purchasing the entire production facility, please contact us – we will be happy to discuss a serious offer. In addition to the edge banding machine, the facility also includes: HOLZ-HER Eco Master 7120 CNC machining center HOLZ-HER 6110 CUT 70 panel saw Lazzari UNO 3000i circular saw Polymac profile edge banding machine Cedpfx Adszp Uzrsrerh Polymac ABS edge strip processing machine Busellato shaper Table-mounted router for grooving Overhead router

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Crjdpfxev Sv Enj Adreh Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Crsdpfx Adjyz Dhzjroh Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Cjdpfjvtp Rmex Adrerh Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: used, mileage: 109,275 km, power: 368 kW (500.34 HP), first registration: 05/2017, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 5,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 10,380 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Air suspension - Hub reduction - PTO - Radio - Rearview camera - Disc brakes - Sun visor - Auxiliary heater - Toolbox = Notes = Crane: Fassi Type: F2150 RAL.2.28 Jib: L816L JDP Winch: max. 6420 kg Work basket Rear and front outriggers 4.75 m - 28,700 kg 7.10 m - 18,520 kg 12.10 m - 9,910 kg 14.65 m - 7,840 kg 17.20 m - 6,360 kg 19.70 m - 5,310 kg 22.10 m - 4,630 kg 24.50 m - 4,100 kg Jib: 27.10 m: 2,350 kg 28.45 m - 1,700 kg 30.75 m - 1,500 kg 32.95 m - 1,320 kg 35.10 m - 1,200 kg 37.15 m - 1,100 kg 39.05 m - 1,030 kg 41.00 m - 970 kg = Further Information = Technical Information Number of cylinders: 5 Axle Configuration Brakes: Disc brakes Front Axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 90%; Tire tread right: 90%; Suspension: Leaf spring suspension Front Axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 90%; Tire tread right: 90%; Suspension: Leaf spring suspension Codpozqyt Aofx Adrjrh Rear Axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread left (inner): 75%; Tire tread left (outer): 75%; Tire tread right (inner): 75%; Tire tread right (outer): 75%; Suspension: Air suspension Rear Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread left (inner): 75%; Tire tread left (outer): 75%; Tire tread right (inner): 75%; Tire tread right (outer): 75%; Suspension: Air suspension Weights Unladen weight: 39,535 kg Payload: 465 kg GVW: 40,000 kg Functional Crane: Fassi Financial Information Price: Upon request Identification Model number: FH 500 8x4 / FASSI F2150 / WINCH = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, ENGEL V 330H/80V/130 Combi Cleanroom – 2-component injection molding machine, manufactured in 2006. The machine comes from pharmaceutical production and is designed for cleanroom applications. Crsdpfjt A Ui Aex Adroh Technical data: • 33,107 operating hours • Screw diameter 25/22 mm • Machine weight 10,600 kg Available additional equipment: • GEKU SR 500 ST robot • Safety cage • Rotary table • Conveyor belt Location: Schwaigern, Germany. Further technical documentation and an inspection can be arranged.

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1907, type of input current: three-phase, total width: 2,050 mm, total length: 22,100 mm, total height: 1,350 mm, input voltage: 380 V, power of the servo motor: 10,000 W, overall weight: 6,500 kg, cutting length (max.): 2,300 mm, For sale: high-performance, fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME. Built in 2019, this machine is designed for fast, automated production of large-format packaging. Due to its automated feeding and folding system, it is ideal for demanding industrial operations. Key Technical Specifications: Manufacturer: HEBEI Soome Packaging machinery co., ltd. Machine Type: Folder Gluer (Automatic Type) 1400x2800 SMZX-QZD-2800 Model: 1400 x 2800 Year of Manufacture: 2019 Csdpfxezimggs Adrerh Effective Width: 2,800 mm Voltage: 380 V Condition: Operational, robust industrial design, ready for sale. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME. 2024 and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are available for sale.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 Credpfx Adozuygqersh • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 26/2632, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1. Pelletizing press, brand: Paladin 1600-210 Internal diameter of the die: 850 mm Die surface: 210 mm The press is equipped with 2 motors, each with 90 kW and a speed of 1500 rpm. The press door is made of stainless steel and has an overload valve. 2. Roll press with 2 rolls on the press, refurbished with a drilled or ribbed design. Crsdpfxjq U R N Ts Adreh The press is complete with a die lifting device and tools. New rear plate for the 2 rolls. The press has been completely refurbished and fitted with new bearings and wear parts, such as front and rear sliders, die adjustment ring, etc. Also includes new V-belts and toothed belt. All safety features will be taken into account, and appropriate switches will be installed. Friction protection, door switch, and inspection hatches will be mounted. Refurbished pump unit for friction and V-belt tension. Note: Conditioner on the press is an optional extra.