Used Avermann Stationary Waste Compactor No 04 for sale (11,323)

Condition: ready for operation (used), YEAR OF MANUFACTURE 1993 380V 35A incl. wiring diagram Kdsdpfxeu Hz Stj Aktol 3,300 x 2,200 x 2,600mm (LWH) Hopper 3,000 x 2,000 x 2,000mm (LWH)

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Ksdpfx Akeyti Ipjtedl

Condition: used, Waste compactor, baler, waste baler, chamber baler, Orwak Compactor 3110, used machine Manufacturer: ORWAK (Sävsjö, Sweden) Type: Compactor 3110 Kdedpfx Aoy S Ui Doktsl Serial No: 105441 Product No: 4903110-00 Overall dimension: 865 x 680 x 2050 mm -press force: 4t -production date: 2011-11 -voltage: 230 V -frequency: 50 Hz -power: 1.1 kW -current: 8.9 A -weight: 340 kg

Condition: good (used), functionality: fully functional, power: 187 kW (254.25 HP), fuel type: diesel, operation weight: 26,500 kg, Year of construction: 2012, The tractor is in working order. In good technical condition, without significant defects. More info on WhatsApp. Kdedpey Sgviofx Aktol

Condition: good (used), Used Thetford International T3 waste compactor. Ksdpfx Ajhvi Ahjktedl

Condition: used, Year of construction: 2014, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2014 Kdjdpfxjyibyms Aktjl Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Kdodpfxeyibv Io Aktsl Year of manufacture: 2015 Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Kedpfsyhbxcex Aktjdl Year of manufacture: 2015 Pressing force: 40 t

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container Kdodpfx Asb A Ii Sjktjl -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 70 t, For sale: a fully functional and well-maintained Husmann MP6070-TS waste compactor installation, currently still in daily operation. The installation is immediately ready for use and is particularly suitable for compacting and transferring various waste streams. Kodpfoxuhtrex Aktodl Features: - Fully operational and functional installation - In daily use and well maintained - Includes two swap bodies for moving containers - Equipped with hydraulic container couplings and a hydraulic container locking system - Features a large feed hopper - Can be easily filled with a wheel loader, excavator, or from a platform/ramp - Immediately available for use Containers are not included.

Condition: used, Electrical waste bins Dimensions: (W x D x H) 595 x 722 x 1500 mm Machine weight 112 kg Kdedpfju R Uiaex Aktol Power: 100-240 V. 50/60 Hz Compaction ratio up to 7:1

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WJME2NNJ60C307461, mileage: 153,443 km, power: 243 kW (330.39 HP), first registration: 07/2015, fuel type: diesel, empty load weight: 15,500 kg, maximum load weight: 10,500 kg, overall weight: 26,000 kg, tire size: 315/80 R 22.5, axle configuration: 6x2, wheelbase: 4,200 mm, next inspection (TÜV): 02/2026, fuel: diesel, energy efficiency: A+, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 26 m³, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, differential lock, electronic stability program (ESP), truck registration, BODY CONFIGURATION VAN EQUIPPED FOR WASTE TRANSPORT – REAR-LOAD COMPACTOR BRAND OMB – BIN LIFTER FOR 120/240/360 LITRE BINS – DIN-COMPATIBLE CONTAINER HOOKS – LOAD CAPACITY 25 CUBIC METRES Ksdpfx Ajxdr U Esktjdl ACCESSORIES ABS – ASR – AIR CONDITIONING – HYDRAULIC SYSTEM – REINFORCED ENGINE BRAKE – ITB RETARDER – DIFFERENTIAL LOCK – ELECTRIC WINDOWS – AIR SUSPENSION/COMFORT SEAT – CRUISE CONTROL – HEATED/ELECTRIC REAR-VIEW MIRRORS – MULTIFUNCTION STEERING WHEEL – REAR CAMERA – ONE OWNER ALL VEHICLES FOR SALE CAN BE INSPECTED AND TESTED, WITH CUSTOMERS FREE TO CHOOSE THEIR PREFERRED TYPE OF REFURBISHMENT. OUR SALES STAFF IS AVAILABLE MONDAY TO FRIDAY FROM 8:30 AM TO 6:30 PM, AND ON SATURDAY FROM 8:30 AM TO 12:00 PM. DIRECTIONS: BY CAR VIA THE A31 MOTORWAY EXIT THIENE, OR BY TRAIN TO THIENE RAILWAY STATION.

Condition: ready for operation (used), functionality: fully functional, mileage: 293,630 km, power: 213.29 kW (289.99 HP), first registration: 05/2009, fuel type: diesel, maximum load weight: 10,320 kg, overall weight: 26,000 kg, tire size: 315/80 R 22.5, axle configuration: 6x2, wheelbase: 4,000 mm, fuel: diesel, energy efficiency: A, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space volume: 23 m³, Year of construction: 2009, Equipment: ABS, truck registration, RIGHT-HAND DRIVE VEHICLE – TECNOINDUSTRIE MERLO ZENIT 23 WASTE COMPACTOR WITH REAR DISCHARGE – BIN LIFT FOR 120-240-360 L CONTAINERS. Kodpfx Akjxuplcstedl THIRD STEERING AXLE. ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED, WITH THE CUSTOMER FREE TO CHOOSE THE DESIRED TYPE OF REFURBISHMENT. OUR SALES STAFF ARE AVAILABLE MONDAY TO FRIDAY FROM 8:30 AM TO 6:30 PM AND SATURDAY FROM 8:30 AM TO 12:00 PM. YOU CAN REACH US BY CAR VIA THE A31 THIENE MOTORWAY EXIT OR BY TRAIN TO THIENE FS STATION.

Condition: used, mileage: 95,000 km, Year of construction: 2019, 3-axle truck, 26-ton gross vehicle weight, 4200 mm wheelbase, fitted with Mazzocchia MAC2NB compactor body (rear loader), payload 11,000 kg, ZF manual gearbox, Telma electromagnetic retarder, on-board weighing system, rear-view camera, Euro 6 standard. Kodjww Ipuspfx Aktodl Note: The vehicle description is intended as indicative and may contain errors or inaccuracies. Please contact us to verify the exact specifications.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned Kodpfx Akoy R Nnfetedl • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: Kdodpfx Aeq Nyuvsktjl - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, Pepperl + Fuchs K-System IVI-KHD2-4HRX, Part No. 040190, evaluation unit SN 9 799 552, unused, 100% functional, delivery as per photos. Kdedsy R Iv Uepfx Aktjl

Condition: new, Pepperl + Fuchs K-System IVI-KHD2-4HRX, part no. 040190, evaluation unit SN 9 799 563, unused, 100% functional, scope of delivery as per photos. Ksdpey R Iv Iofx Aktsdl

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C Serial number: 1995MG27553, used, in good condition, 100% fully functional, scope of delivery as per photos Kjdpfxsy Npzpj Aktodl

Condition: new, Mitsubishi HA300NCB-S SPEC NO. 84018 + Encoder OSA104 SN J4AP403481, unused with signs of storage, 100% functional, scope of delivery as per photos Kdodpjqx Dd Defx Aktsl

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C SN: BEDBB32950, used, as-new condition, 100% functional, scope of delivery as per photos. Kdjdpoy Npziofx Aktel

Condition: new, Brinkmann STC 260 / 460 MVX + 443 submersible pump 250 L / min No. 002, serial number as per photo, unused, 100% functional, scope of delivery as per photos Kodpfji D Hkijx Aktsdl

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C Serial number: BEGRS039604, used, in good condition, 100% fully functional, delivery as per photos Kjdpjy Npz Aefx Aktsdl

Condition: ready for operation (used), Baldor BSC1105-24 servo drive, INPUT 3AC230V, ID/No: 20405C, SN: 1995MG27554, used, in good condition, fully functional, scope of delivery as shown in photos. Kdsdpfx Aoy Npzvsktol

Condition: used, cone distance min./max. 0-108 mm Kodpeyh Rmmjfx Aktsdl Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation