Used Avk Generator for sale (9,712)

Year of construction: 2009, condition: used, AvK Generator for industrial land application Rated voltage: 10 kV at a speed of 1500 1/min frequency: 50 Hz Rated current: 49,1 A Losses: 37 kW Power factor: 0,80 Voltage adjustment range: +- 5% Maximum ambient temperature: 40 °C Maximum installation altitude: 1000 m Nsdpfxsgtt A Do Ag Dswf Protection class: IP23 Year of manufacture: 2009 Weight per generator: 5400 kg

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Nwsdpfx Asv Uag Ieg Dof

Condition: ready for operation (used), Year of construction: 1991, Flow rate: 1500 m³/h Drive motor: 380 V, 2850 rpm, 1.5 kW Extraction pipe diameter: 140 mm 3-meter sections with 3 joints, height-adjustable Intake funnel with throttle valve Space required: 1150 x 600 x approx. 2300 mm Nwedpfewx H Dyox Ag Dof

Condition: used, functionality: unexamined, nominal power (apparent): 210 kVA, For more precise data, see the nameplate Nwsdpfx Aexn S Exsg Djf

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Nedjyl Nntspfx Ag Dowf

Condition: used, Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker Nodpfx Aefngxhjg Dswf -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Nodpfx Aex U Tgmjg Djwf The unit looks as good as new. The system was only in operation for a short period.

Condition: excellent (used), Year of construction: 2002, Application: mechanical conversion of different frequencies Generator from AVK Type: DSG62L-4 Year of manufacture: 2002 Type of current: AC Voltage: 1000/577 V Current: 577/1000 A Power: 1000 kVA Motor from Siemens Voltage: 500 V Nedpfx Aoikzv Sog Djwf amperage: 430 A Frequency: 50 Hz Speed: 1488 rpm

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Nedpfsxfrv Ejx Ag Dewf Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Nwedpsw U N Daefx Ag Djf

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Nwjdpfxey Emwyj Ag Djf Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Njdsruakgspfx Ag Dewf Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: new, functionality: fully functional, machine/vehicle number: SH 200, Heat Recovery Co-Generation System, featuring: Integrated by: Wartsila Heat Recovery Steam Generator System; Alfa Laval Steam Header SH 200, Alfa Laval Vertical Exhaust, Gas Boilers, Model AV-6N, Alfa Laval Steam Drum HK-10-2, Alfa Laval Feed Water Control Unit, Alfa Laval Condensate Transfer Pump RDD 901, NCE Boiler Washing Water Tank, Alfa Laval Blow Down Cooling Module, Alfa Laval Aalborg Oy WES Technik T-Piece Damper, Wartsila Logics Controls, Alfa Laval R1 Heat Recovery, Universal Vent Silencer, SWAS pH Water System (containerized). Sistema de cogeneración con recuperación de calor, que incluye: integrado por generador de vapor de recuperación de calor Wartsila; cabezal de vapor Alfa Laval SH 200; escape vertical Alfa Laval; calderas de gas Alfa Laval, modelo AV-6N; tambor de vapor Alfa Laval HK-10-2; unidad de control de agua de alimentación Alfa Laval; bomba de transferencia de condensados Alfa Laval RDD 901; tanque de agua de lavado de calderas NCE; módulo de enfriamiento de purga Alfa Laval; compuerta tipo “T-Piece Damper” Aalborg Oy WES Technik de Alfa Laval; sistema de control lógico Wartsila; recuperación de calor Alfa Laval R1; silenciador universal de ventilación; sistema de agua SWAS para control de pH (contenedorizado). Nwedpjyf N Umefx Ag Def

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Njdpfx Agexaqa So Djwf Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Nwjdpfx Ajxdfazsg Djf Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Njdpfx Agsxdfa Us Dowf Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Njdpfertrykex Ag Dswf Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: excellent (used), Year of construction: 2011, operating hours: 103 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: grey, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 4 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Njdpfex R Szujx Ag Dswf Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 4 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Condition: used, Year of construction: 2012, Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium Nwjdewuyzwopfx Ag Djf ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: new, Year of construction: 2007, color: yellow, power: 1,000 kW (1,359.62 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 1,850 mm, Empty weight: 5.840 kg Nsdpfeyxmwyex Ag Dswf Power: 750 Current frequency: 50 Hz Voltage: 400

Condition: new, Year of construction: 2025, machine/vehicle number: XPD00285, fuel type: diesel, power: 248 kW (337.19 HP), motor manufacturer: Cat C9.3B, General information Field of application: Construction Weights Empty weight: 4.784 kg Functional Generator capacity: 310 kVA CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 67.2 dB at 7m and 100% Load Nsdot D Uhzspfx Ag Dswf - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final

Condition: new, Year of construction: 2025, machine/vehicle number: XPJ00261, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 4.487 kg Nwsdpfx Agjt D Uhuj Def Functional Generator capacity: 200 kVA CE mark: yes Other information Fuel consumption: 43.4 Liter / hour at 100% load Generator: Cat LC5100 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 822 l Transport dimensions (LxWxH): 4,085x1,42x2,35 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 64.6 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: CATXQP20KXPZ00144, fuel type: diesel, power: 16 kW (21.75 HP), motor manufacturer: Cat C2.2, General information Field of application: Construction Weights Nwsdot D Uhnjpfx Ag Def Empty weight: 815 kg Functional Generator capacity: 20 kVA CE mark: yes Other information Fuel consumption: 5.5 Liter / hour at 100% Load Generator: Cat LC1100 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 56 l Transport dimensions (LxWxH): 1,718x1,001x1,3 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: XPV00245, fuel type: diesel, power: 92 kW (125.09 HP), motor manufacturer: Cat 4.4, General information Field of application: Construction Weights Empty weight: 2.527 kg Functional Generator capacity: 115 kVA CE mark: yes Other information Fuel consumption: 27.3 Liter/hour at 100% Load Generator: Cat LC3100 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 518 l Transport dimensions (LxWxH): 2,97x1,15x2,076 Production country: CN Additional information Nwodpet D Uhhjfx Ag Def Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 65.9 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: WR300208, fuel type: diesel, power: 1,000 kW (1,359.62 HP), motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 6.985 kg Functional Generator capacity: 1.250 kVA CE mark: yes Njdpfexq Up Eox Ag Dewf Other information Fuel consumption: 185.5 Liter per Hour at 75% Load Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 4,64x1,68x2,16 Production country: US Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel