Used Ayel-Tech Cd 6241 X 1500 for sale (67,588)

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 570 mm turning speeds 45 - 1800 U/min centre height 210 mm spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 3,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake Tedpfx Ajy Ehxxehmjc removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool

Condition: new, Year of construction: 2025, turning diameter: 410 mm, – Centre distance: 1500 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm Todpfx Ahoytadnomoc – Spindle bore: 52 mm – 45–1800 rpm – Longitudinal and cross feed – Digital readout – Brake – Coolant system – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Multifix toolpost with 4 holders – Emergency stop – Documentation – 400V

Condition: new, – Distance between centers: 1000 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm Tsdsw S Ikmjpfx Ahmec – Spindle bore: 52 mm – 45/1800 rpm – Longitudinal and transverse feed – Digital readout – Brake – Coolant system – Multifix with 4 tool holders – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, MEKITurn KT660 x 1500 - conventional lathe with FAGOR iT30 measuring system. Precise conventional turning and solid machine construction. Demonstration machine, year of manufacture 2024, approximately 50 operating hours, and immediately available. TECHNICAL DATA Swing over bed: 660 mm Swing over cross slide: approx. 430 to 440 mm Tedoz E H Nqopfx Ahmoc Swing over compound slide: approx. 820 to 845 mm Distance between centers: 1540 mm Center height: 330 mm Bed width: 400 mm Spindle bore: 105 mm Spindle nose: D1-11 Spindle speed: 15 to 1200 rpm Number of speed steps: 12 Main motor: 11 kW Tailstock quill: diameter 75 mm Quill travel: 160 mm Tailstock arbor: MK5 Machine weight: approx. 2580 kg EQUIPMENT FAGOR iT30 measuring system Cooling system Tailstock Steady rest 315 mm scroll chuck Safety devices German CE declaration of conformity, issued by the German importer PRICE AND LOCATION Special price on request, ex works 66706 Perl-Besch, Germany. Seller: 3M-Consulting SARL. Delivery, installation and commissioning at the customer's site possible for an additional charge. WARRANTY For Germany and Luxembourg: 6 months warranty from handover, including materials and labor. Travel costs are not included. Outside Germany and Luxembourg: 6 months warranty on materials from delivery. Labor and travel costs are not included. Technical specifications according to the present and confirmed data sheet.

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min Tsdpfx Aeu Ix Nrehmsc tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Condition: new, overall weight: 1,775 kg, total height: 1,320 mm, total width: 850 mm, total length: 2,450 mm, Spitzenweite 1500 mm max. Schwenkbereich über Bett 410 mm Tsdjzdr E Dopfx Ahmoc max. Schwenkbereich über Schlitten 255 mm max. Schwenkabstand 580 mm Spindelbohrung 52 mm Spindelkonus Camlock D1-6 Spindeldrehzahl 1: 30 - 550 1/min Spindeldrehzahl 2: 550 - 3000 1/min Verfahrweg Querschlitten 225 mm Verfahrweg Oberschlitten 100 mm Bei jeglichen Fragen zur Maschine, sowie einer Terminierung zur Besichtigung, bitten wir Sie uns einfach telefonisch oder per Mail zu kontaktieren. Schauen Sie sich gerne unsere anderen Anzeigen an, um einen vollständigen Überblick über unseren Lagerbestand zu erhalten.

Condition: new, overall weight: 1,150 kg, total height: 1,320 mm, total width: 850 mm, total length: 1,940 mm, Distance between centers 1000 mm Max. swing over bed 410 mm Max. swing over carriage 255 mm Max. swing in gap 580 mm spindle bore 52 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 -550 1/min Spindle speed 2: 550 - 3000 1/min Travel cross slide 225 mm Travel top slide 100 mm Tsdpezdr Ewefx Ahmjc If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Tedpfozlb D Sex Ahmec Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,345 kg, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 660 mm, total length: 2,710 mm, total width: 1,230 mm, total height: 1,600 mm, turning diameter: 660 mm, spindle motor power: 7,500 W, spindle bore: 105 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over bed slide: 440 mm, turning length: 1,500 mm, type of input current: three-phase, Equipment: documentation/manual, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH ## MTP C6266 Universal Lathe 660 × 1500 | Ø105 mm Spindle Bore | 7.5 kW | 400 V | 3-Axis DRO Brand new (2026) heavy-duty universal lathe for precision machining of large and long metal components. Ideal for production plants, machine shops, tool rooms and maintenance departments. The lathe performs external and internal turning, facing, drilling, boring and thread cutting. With a 660 mm swing over bed and 1500 mm between centres, it handles heavy and long workpieces with ease. The Ø105 mm spindle bore accepts shafts, tubes and long stock, and the D1-8 spindle nose ensures secure chuck mounting. The gap bed allows turning up to Ø900 mm over a length of 250 mm, while the wide 400 mm bed provides excellent rigidity. Metric, imperial, module and DP threads can be cut, and automatic longitudinal and cross feeds deliver repeatable surface quality. TECHNICAL DATA • Swing over bed: 660 mm Tedpfx Ajz Hww Uohmsc • Swing over cross slide: 440 mm • Swing in gap: 900 mm (gap length 250 mm) • Distance between centres: 1500 mm • Bed width: 400 mm • Spindle bore: 105 mm • Spindle nose: D1-8 • Spindle speed range: 25–1600 rpm • Longitudinal feed: 0.044–1.48 mm/rev • Cross feed: 0.022–0.74 mm/rev • Metric threads: 0.45–120 mm • Imperial threads: 7/16–80 TPI • DP threads: 7/8–160 DP • Module threads: 0.25–60 MP • Maximum tool size: 25 × 25 mm • Tailstock quill taper: MT5 • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 2710 × 1230 × 1600 mm • Weight: 3,345 kg STANDARD EQUIPMENT • 3-jaw and 4-jaw chucks • Faceplate • Dead centre • Fixed and travelling steady rests • Change gears • Tool post • 3-axis digital readout (DRO) • Halogen work light • Full-length bed guard, leadscrew guard, chuck guard and tool post guard DELIVERY THROUGHOUT EUROPE We arrange transport to any destination in Poland and across Europe. Delivery costs are calculated individually; please send us your postcode and city for a transport quotation. Contact us for details and availability. We also invite you to explore the other machines in the Metal Technics Polska range.

Condition: new, Year of construction: 2026, – Maximum turning diameter: 900 mm – Turning diameter over the bed: 300 mm – Turning diameter in the gap: 430 mm – Turning diameter over the carriage: 180 mm – Spindle bore: 38 mm – 65–1810 rpm – Longitudinal and transverse feed – Sino digital display on two axes – Brake – Coolant system – Lighting – Protective guard – Fixed steady rest – Traveling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V Todpfjzwqygex Ahmsc

Condition: like new (used), Year of construction: 2019, Technical Data: Todpfx Ahjzzrutjmoc Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: new, Year of construction: 2026, spindle bore: 51 mm, – Maximum turning diameter: 1000 mm – Turning diameter over bed: 360 mm – Turning diameter over cross slide: 230 mm – Spindle bore: 51 mm – Infinitely adjustable spindle speed – Longitudinal and transverse feed – Sino digital display for 2 axes – Cooling system – Lighting – Safety guard – Fixed steady rest – Follower rest – Three-jaw chuck Tedpfx Ahjz Altromjc – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: new, rotational speed (max.): 1,600 rpm, rotational speed (min.): 75 rpm, – MK4 – 75/1600 rpm – Right- and left-hand rotation – Thread cutting function – Height-adjustable drilling unit – Swiveling drilling unit – Gear drive – Safety cover – Emergency stop – Documentation – 400V Tedpjy Rx Dijfx Ahmec

Condition: new, spindle bore: 51 mm, turning diameter: 360 mm, turning length: 1,000 mm, – Centre distance 1000 mm – Swing diameter over bed 360 mm – Swing diameter over cross slide 230 mm – Spindle bore 51 mm – Longitudinal and cross feed – SINO digital readout on two axes – Brake Todoyqx A Djpfx Ahmoc – Coolant system – Lighting – Protective cover – Fixed steady rest – Follow rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: new, roller diameter: 140 mm, - Capacity 1050 x 6 mm - Electrically adjustable rear roller - Conical roller - Swiveling top roller - Brake motor - Emergency stop - Documentation - 400V Tsdpopwgdyefx Ahmec

Condition: new, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, roller diameter: 190 mm, - Capacity 2070 x 7 mm - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamp) - Digital display for rear roller movement - Digital display for lower roller movement (material clamp) - Hardened rollers Tedpfx Ajn Ryfwehmec - Tapered rollers - Swing-down upper roller - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2010, functionality: fully functional, space requirement width: 2,700 mm, space requirement length: 3,500 mm, space requirement height: 2,600 mm, overall weight: 5,200 kg, pressure: -1 bar, operating pressure: 6 bar, temperature: 200 °C, filter area: 2.5 m², operating temperature: 200 °C, Reference: C13598 316 stainless steel ATEX nozzle filter drier, 3V Tech 250 FPP/SD FM, with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industries. Material 316/316L stainless steel Technical specifications Model 250 FPP/SD FM Year of manufacture 2010 Body working pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Case/jacket working pressure -1/+10 bar Case/jacket working temperature -25/+200 ºC Case/jacket volume 80 + 20 L Equipment configuration ATEX Electrical panels Bag filter Hydraulic unit Centrifugal pump Transport information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 kg Documentation CE certificate Certificate ATEX Maintenance Manual Operating Manual Drawings Electrical Diagrams Filtration Area Filtration Area Tedewpf Sqspfx Ahmsc 2.5 m² Condition Unused Manufactured by 3V TECH

Condition: new, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2050 x 4 mm - Electrically adjustable rear roll Tjdpfx Ahopwgcusmoc - Conical rolling - Swiveling top roll - Braking motor - Emergency stop - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Tjdpfxjr D Nfkj Ahmsc Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: good (used), Year of construction: 2004, functionality: fully functional, Heavy-duty, fully hydraulic CNC bandsaw machine for automatic and economical cutting of solid and profile materials. Key features: - Cutting range: round 410 mm or flat 410 x 410 mm Tsdpfxezl Ulps Ahmec - Modern 2-axis CNC control - Bandsaw blade monitoring with automatic feed rate adjustment - Inching function for the first cut, 15 mm min. remaining piece length - Stepless, frequency-controlled saw drive - Clamping pressure adjustment for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided bandsaw blade lifting device - Hydraulic bandsaw blade tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: plating gray RAL 7036 and turquoise RAL 5018 Includes 1 bi-metal bandsaw blade 6150 x 41 x 1.3 mm

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 Acu Rite digital readout Tsdpfx Ajvq Ibxjhmoc Machine lamp Coolant tank Longitudinal stop Rear chip guard Chuck guard

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 10010, NEXTAMALLI Corn Nixtamalization System, Model ALI TECH RC1500, Serial 10010, Year 2020, 1,500 kg capacity, approx. 3.42 x 2.96 x 7.27 m; includes bucket elevator approx. 0.20 x 0.23 x 6.20 m, hopper approx. 2.41 x 1.54 x 1.81 m with coil and scale, stairs with mezzanine and control panel. Tjdjzyv S Tjpfx Ahmoc - Nixtamalizadora para Maíz Marca NEXTAMALLI, Modelo ALI TECH RC1500,Serie 10010,Año 2020 Capacidad 1500kgrs con medidas aprox 3.42 x 2.96 x 7.27 mts; Incluye Elevador de Cangilones de medidas aprox 0.20 x 0.23 x 6.20 mts, Tolva de medidas aprox 2.41 x 1.54 x 1.81 mts con serpentín y Bascula , Escalera con mezanine y Tablero de control.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest Tsdox Rt Euspfx Ahmec - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: used, Year of construction: 1977, functionality: fully functional, Headstock and faceplate lathe with sliding bed This machine can be used for normal turning operations, as well as with the bed shifted by approximately 500 mm, for large diameters up to 2000 mm. This makes the machine very space-saving. It is a special lathe for both normal and large workpiece diameters due to this sliding bed feature. Todpozxgr Ujfx Ahmsc Manufacturer: Ravensburg Model: 1500 x 2000 mm Year of manufacture: 1977 Faceplate diameter: 1500 mm Center height in the saddle: 1000 mm with the bed shifted Workpiece diameter in the saddle: 2000 mm Turning length: 2000 mm Simple tool holder: 90 mm high Top slide with automatic feed: 500 mm Top slide, transverse: 400 mm Cross slide: 700 mm 3-way bed, width: 240; 150, 150 mm L x W x H: 5400 x 2300 x 2300 mm Weight: approx. 14 tons

Condition: new, - Capacity 250 x 8 mm - Hydraulic - Foot control - Central lubrication system - Emergency stop Tedpfx Ahenwlptemjc - Documentation - 400V