Used Bühler Sangati Sgs T-30 for sale (83,645)

Condition: used, Year of construction: 2007, Used Golfetto Sangatie Stone Catcher Multiple units available Kedpfx Akoxft Ddowenb Drive 2x 3kW Used for destoning wheat Measurements in attached file Gravity Selector Dryostoner

Condition: used, Year of construction: 2006, functionality: fully functional, The PowerShot allows for large quantities of chocolate to be deposited, with or without pre-mixed ingredients. In addition to its top quality, the PowerShot impresses with its performance in dot, band, or one-shot depositing. The working width is 1300 mm. Key data: • Type: Bühler depositor PowerShot, one-shot/drop depositor • Working width: 1,300 mm • Year of manufacture: 2006 • Bühler commercial number: 064200.010 • Design: complete V4A stainless steel, weight approx. 1,000–1,500 kg • Condition: mechanically complete; currently not connected, without software/control (display missing). With connection and programming, it is likely to be functional according to our assessment. • Control cabinet/machine: untouched – nothing has been removed or modified. We have deliberately removed the covers so that no pests can nest and we can regularly inspect everything. Knodpfsxdt Dhsx Akwjb • Location: Upper Austria (AT), loading on site possible. No modifications have been made to the control cabinet or the machine; the covers have been removed to prevent pests from entering and to allow us to regularly inspect everything.

Condition: excellent (used), Year of construction: 2011, Winmax control Knedpfxezwhk Ne Akweb Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Kedpjzu Szysfx Akwonb

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 495 441, Vertical grinders for producing pearl barley, spelt, and emmer wheat, as well as for grinding lentils. Kjdpfxjznuias Akwjnb

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Demonstration model, still in the box, Kjdpfx Ajz Az D Iokwjnb

Condition: excellent (used), Year of construction: 2019, operating hours: 15,708 h, machine/vehicle number: 700167604, type of input current: three-phase, We offer this Bühler SORTEX A MultiVision I grain sorting machine in very good condition, manufactured in 2019. Manufacturer: Bühler Model: SORTEX A MultiVision I Knedpfx Akozbh Hmsweb Year of manufacture: 2019 The Multi Vision high-resolution inspection system focuses on the slightest color variations as well as light and dark color defects. The patented PROsize technology sorts products and foreign materials that have the same color as the quality product, using size characteristics. The machine is equipped with near-infrared spectroscopy (NIR) technology for visual color analysis. This allows the sorter to detect defective pieces or foreign objects of any color, even black. It also enables the detection of color defects. The machine is equipped with a new optical sorter, which achieves up to 50% higher rejection rates. SpectraVision was designed to provide maximum yield. Newly designed internal full-color cameras provide the best color resolution even for the smallest color defects, while new InGaAs cameras take the detection of foreign material (FM) to a new level. Innovative ejection algorithms significantly minimize false rejects, and new calibration and tracking algorithms improve machine consistency and reduce the number of false rejects. Default modes and programs for each product are pre-set and tested by SORTEX experts for optimal machine settings right out of the box. A simple user interface design and individual sensitivity control for each defect make it easy for the operator to maintain optimal machine performance. The machine's performance can be monitored from anywhere in the world, in accordance with Industry 4.0 standards. Machine setting changes are recorded and stored in the Bühler Insights system, and the SORTEX monitoring system enables real-time monitoring of sorting performance and emergency alerts.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10380840, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, Horizontal die casting machine Make: Bühler, Model: Evolution B42D, Year: 2004, Serial number: 10380940 Mould height: 300 - 700 mm Mould opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping plate dimensions: 500 x 500 mm Clear tie bar spacing: 640 x 640 mm Tie bar diameter: 125 mm Knsdsyngv Tspfx Akwsb Ejector stroke: 145 mm Ejector force: 150 kN Max. closing force: 4200 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Incl. die spraying system Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB 4600 M2004

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, operating hours: 5,216 h, load capacity: 3,000 kg, lifting height: 3,270 mm, fuel type: gas, mast type: telescopic, construction height: 2,160 mm, motor manufacturer: Nissan, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 23x9-15, rear tire type: superelastic tires (black), rear tire size: 6.50 - 10, overall weight: 4,220 kg, total height: 2,160 mm, total length: 2,800 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: sideshift, KOMATSU FG 30 T -11E – LPG forklifts Ksdpfez Aqqcjx Akwjnb TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 3.270 mm Closed height: 2.160 mm Mast: Standard (2W327) Fork length: 1.200 mm Fork carriage: 3 A Drive: 4-Zyl. Treibgas Engine: Nissan Tyres: Superelastik SE 23x9-15 (40%) / 6.50 - 10 (30%) Service weight: 4.220 kg Length: 2.800 mm Width: 1.250 mm Year of manufacture: 1992 Operating hours: 5.216 h Condition: ready to drive EQUIPMENT 3rd valve, Front work lights, Overhead guard cover, Front windscreen, Load backrest ATTACHMENTS Load backrest, Sideshift Internal no.: 1202056 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Round sieve Knodpfx Aevv Eb Hokwjb - weight: 780 kg - manufacture: Bühler - model: DFDT-31 - year of production: 2005 - capacity: 8-10 t/hour

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 2-90-30 Application PVC PIPE The extruder is in very good condition and ready for operation. Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Kjdpfoxcp T Nox Akwenb The extruder is my property

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 Knsdpfx Asv D U Apekweb milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale are three optical sorters from Bühler. They are currently still integrated into our production and can be inspected on site. The relocation is scheduled for around the end of August 2026. Knsdpfx Aksyrndaewsb All technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us.

Year of construction: 2023, condition: new, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm Knedpsp Uduhofx Akwsb table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm Knodpfxjz Aaw Se Akwob - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: new, Year of construction: 2022, functionality: fully functional, Extruder for protein, TVP, and high-moisture analogues. 110 kW. This equipment has never been used and is complete. Knedpfx Aezh I Dqskweb Pre-conditioner Extruder Polycool 500 and one Polycool 1000 6 cooling and heating regulators, Thermoplas. Dosing system, Bühler (loose weight) for protein Stainless steel control panel Venting system for the extruder Dosing system for liquids (Netsch)

Condition: good (used), Year of construction: 2012, ITW BÜHLER WILSON HARDNESS TESTER SuperRockwell Hardness Testing Device BRIRO RK-Automatic Year of manufacture: 2012 Knodjxnpvzopfx Akwob Test height: 0-235 mm Throat depth: 145 mm with HM-Control evaluation system with RS-232 data interface for data transfer with settings for HR15N; HR30N; HR45N; HR15T; HR30T; HR45T used Weight: 150 kg

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion forklift Load center: 500 Knjdpfeztg Ilex Akwob ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options, and we will gladly provide you with a quote for delivery under favorable conditions. We also offer trade-in options for Linde equipment, even if you do not purchase a unit from us. The operating hours stated were recorded on the date of listing. Subject to prior sale, changes and errors. Clamp fork, side shifter, pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, full free lift, safety light, seat heating.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Kedpjy R Rn Hefx Akwenb Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,366 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: telescopic, construction height: 3,150 mm, motor manufacturer: VW, fork length: 1,196 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 225/75 - 10, overall weight: 4,575 kg, total height: 3,150 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: liquid petroleum gas (LPG), LINDE H 30 T - 02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.900 mm Knodsz Aqryspfx Akwob Closed height: 3.150 mm Mast: Standard (2W490) Fork length: 1.196 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (80%) / 225/75 - 10 (25%) Service weight: 4.575 kg Length: 2.700 mm Width: 1.300 mm Year of manufacture: 2013 Operating hours: 3.366 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover Internal no.: 1202060 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Kodozxzagjpfx Akwenb Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,043 h, load capacity: 3,000 kg, lifting height: 6,450 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,955 kg, total height: 2,600 mm, total length: 2,850 mm, total width: 1,250 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, LINDE H 30 T -02 – LPG forklifts Kodpfxsz Ap Nws Akwsnb TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 6.450 mm Closed height: 2.600 mm Free lift: 1.800 mm Mast: Triplex (3F645) Fork length: 1.200 mm Fork carriage: FEM 3 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (20%) / 23 x 9 - 10 (60%) Service weight: 4.955 kg Length: 2.850 mm Width: 1.250 mm Year of manufacture: 2015 Operating hours: 11.043 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Double clamp, Sideshift, Double pallet clamp Internal no.: 1202070 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm Kjdpfx Aksvfhpxowenb total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm Knodovfhqvepfx Akweb stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min Knedpfx Aevfhq Askwsb ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm