Used Baka Fgy 3000 for sale (6,163)

Condition: new, Year of construction: 1999, total length: 1,760 mm, lifting height: 2,500 mm, load capacity: 3,000 kg, Warehouse technology Baka FGY 3000 Drive Electric Nsdpfx Ajxd Hv Rei Town Year built 1999 Lifting height (mm) 2,500 Lifting weight (kg) 3,000

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Nodpezyc Risfx Ai Tewn The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 We can organise shipping / delivery for you. Nodpfx Aioy Rvfqj Tewn

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Nwsdjz Hvl Repfx Ai Ten Two sets of the same size are available.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Nwodez Smqkepfx Ai Ten Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed continuously adjustable, 80 to 1600 mm/min. Diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W: 370 x H: 450 Nwedpfx Aogu Edyei Ton Model or color variations possible.

Condition: good (used), functionality: fully functional, Universal lathe SU63A/3000, accessories. Nedpfx As Af Ah Nei Tjwn

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Nsdpfj Aaxt Rox Ai Tjwn Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Nsdoz R Dz Ajpfx Ai Tjwn Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: Njdpez Iww Rsfx Ai Town 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Year of construction: 2021, condition: excellent (used), functionality: fully functional, For sale the STONE SAW WITH FIXED BRIDGE FOR STONE, QUARTZ AND CERAMIC SLABS, the producer ACHILLI S.r.l Njdpfx Aioz Szhie Town Type: TFM 3000 Year: 2021 in very good working condition, as NEW ! The cutting length is 3.4 m , 45° cutting max disc diameter 500 mm ,laser collimator marking cut,

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure Nwsdpfxsz Rl Hye Ai Tsn - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Main Spindle: Technology:Belt-driven spindle Speed (max.):3,000 rpm Power (max.):26 kW Bar capacity:91 mm Workpiece clamping:3-jaw chuck, SAMCHULLY HS-12 Tool holder: Technology:12-station turret Tool holder:BMT65 Tool drive:5,000 rpm Travel in X/Y/Z:215/-/560 Nwsdpfe Aau T Hsx Ai Ton Main Spindle: Technology:Trailed tailstock Stroke:100 mm Quill diameter:110 mm Taper:MT5 Main Spindle: Chip Management:Chip Conveyor Coolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 bar Tool Measurement:Automatic Measuring Arm Automation:Prepared Finished Part Removal:Part Catcher with Collection Box Setup Mode:Electronic Handwheel

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Nsdpfxjz Ixzks Ai Tswn

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. The decanter is used and has minor signs of wear. Currently, the decanter is still connected to the power supply and can be inspected by appointment. If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Nwedpfxoz I S R Se Ai Ton Dismantling, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Nwodpfxjzn N Ikj Ai Tjn

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 100 t, clearance between the columns: 2,600 mm, Make: Gasparini Model: PSG 100 Year of manufacture: 1994 Type: Press brakes Control: CNC Nwodpe Aa Dc Dofx Ai Ton Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Distance between columns (mm): 2600 mm Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: used, Year of construction: 1987, Parallel lathe PBR, type TM-30 Distance between centers: 3000 mm Max. diameter over bed: 620 mm Max. diameter over cross slide: 400 mm Max. diameter in bed gap: 860 mm Spindle diameter: Ø 105 mm Spindle speed: 15 – 1500 rpm 3-jaw chuck, Ø 315 mm Year of manufacture: 1987 Nwedpfx Aio Acd N Ns Ton Motor: 15 hp Threading: Metric + Whitworth Tailstock: MK5 Equipment: 1 x 3-point fixed steady rest Rapid traverse Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4.5 t

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking Nedpfx Aisz S Afps Tjwn -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2014, Marel TBL 3000 Target Batcher Marel’s TargetBatcher has long been recognized for its accuracy and its ability to weigh products for fixed-weight packaging. Equipped with 7 high-precision static scales and 14 buffer containers, the TargetBatcher selects the optimal product combination in a fraction of a second, making it significantly easier for processors to handle multiple small product batches where a quick changeover from one product to another is essential. The TargetBatcher is used in processing plants worldwide and is suitable for a wide range of products, including mackerel, haddock fillets, tuna steaks, tiger prawns in shell, hake slices, squid, cuttlefish, and other products. This compact weighing system is available in two variants: one for fresh and frozen products, and another for specially glazed products. The TargetBatcher offers a simple way to reduce raw material loss, primarily by combining the pre-determination of the number of frozen or fresh products that should be included in a package of a specific weight. Optionally, you can use Marela software to track machine operation in real time. The data collected from the TargetBatcher provides a complete overview of the activities involved in the weighing process. The TargetBatcher is accurate and effectively minimizes raw material losses. It is a reliable device that requires minimal maintenance and is also user-friendly. Model: Marel TBL-3000 Year: 2014 Nwsdpoz Tp Srsfx Ai Ten Machine dimensions (LxWxH): 3,130 x 790 x 1,610 mm Machine weight: 330 kg Power: 230/400V / 1kW / 50/60Hz Max. product dimensions (LxWxH): 280 x 170 x 120 mm Max. product weight: 3,000 g Capacity: 12-24 portions/min. Accuracy: 1 g / 0.035 ounces

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,379 h, For sale: professional CNC punching machine TRUMPF TruPunch 3000, manufactured in 2014. The machine is in very good technical and visual condition. The total operating time is only about 25,379 operating hours, which is a low number of operating hours for industrial TRUMPF machines of this age. Nwedpszxxhnsfx Ai Ton The machine is sold together with punching tools. Currently, the unit is fully connected to the power supply, so before purchasing, you can inspect the machine in operation, check its functionality, and perform a test punching operation. Key information: Manufacturer: TRUMPF Model: TruPunch 3000 Year of manufacture: 2014 Type: Electric CNC punching machine Working table: 3000 x 1500 mm Capacity: 18T Operating time: ~25,379 operating hours Comes with punching tools If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2016, machine/vehicle number: ET251, Used OMB labelling machine 4 heads 3000 BPHTechnical Specifications & Performance DataThe OMB ET 3000 R is a compact rotary labeling machine engineered for precise self-adhesive label application in beverage production and industrial packaging environments. Manufactured in 2016, this second hand unit combines an electronic cam architecture with motorized head height control to deliver consistent, repeatable labeling performance. It is supplied with one complete format set for 0.75L Bordeaux glass bottles and reaches speeds up to 3,000 bottles per hour, making it a strong fit for quality-focused wineries and specialty beverage producers seeking dependable throughput in a used bottling line.Manufacturer: OMBModel: ET 3000 RYear: 2016Production speed: up to 3,000 bphConfiguration: 4-position rotary carousel with electronic camLabeling technology: 2 self-adhesive (PSL) stationsIncluded format: 0.75L Bordeaux bottle formatContainer type: Glass bottles (cylindrical)Electrical supply: 400 VCompliance: CE markedAdvanced Automation & Control SystemsThe ET 3000 R integrates an electronic cam motion system that ensures smooth, synchronized bottle handling and precise label placement. Motorized head height adjustment allows rapid, repeatable changeovers within the supported format range, minimizing downtime and operator intervention. The dual self-adhesive stations are designed for stable web handling and accurate dispensing, supporting consistent label application across production runs.Electronic cam motion for coordinated rotary positioningMotorized head height adjustment for fast, precise setupSelf-adhesive application with stable web controlOperator-friendly controls for routine adjustmentsCE-compliant electrical and safety architecture400 V industrial power connectionProduction Line Integration CapabilitiesThis labeling machine can operate as a standalone workstation or be integrated inline with upstream filling and downstream inspection or packing equipment as part of a complete used bottling line. Its rotary design supports smooth bottle transfer with standard conveyors, and its engineering is suited to beverage production requirements where clean, accurate label placement is essential.Inline or standalone operationCompatible with standard conveyor systems and guidesOptimized for cylindrical glass bottlesFormat supplied for 0.75L; architecture supports additional format kits if requiredMachine Condition & Maintenance HistoryThis is a second hand labeling machine from 2016 in working condition and ready for operation. It has been configured with one format set for Bordeaux 0.75L bottles. No operating hour counter is provided, and routine maintenance records are not included in this summary.Operational Performance & VersatilityWith two self-adhesive labeling stations and a 4-position rotary carousel, the ET 3000 R pr... Nwjdpfs Adyy Tjx Ai Ten

Condition: used, Pile Turner DOX 3000 M Stapelwender / Pile Turner DOX 3000 M Year 1988 - Serial-No. 7356 Format / Size max. 720 x 1020mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Njdpfxs Af Aluo Ai Tewn On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Bindemaschine - Binding machine Esselte 3000 Nsdpfo Af Aiyex Ai Tewn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information Nedpfxj Afvfhs Ai Town - Distance between table and press beam: 1,800 mm