Used Ball Bearing Puller Set 69 - 1 Pc for sale (100,605)

Condition: used, Ball bearing puller set, 69 parts, clamping range 35-120 mm, KUKKO Kjdpfx Agjz Ux Uls Aedu · Operating principle: Access is gained through the bearing rings. To do this, the ball cage must be destroyed. Afterwards, the ball segments of the puller, corresponding to the balls of the bearing, are inserted between the inner and outer rings of the bearing and secured by rotating them by 90°. After screwing the puller's pull bolts into the puller segments, these are positioned in the crossbar of the puller. The bearing is then pulled off by tightening the pressure spindle of the puller against the shaft on which the bearing is mounted. · Other technical specifications: Weight: 1.64 kg · Packaging: L-Boxx mini

Condition: used, Ball bearing puller set, 69-piece, with tensioning device, 20-95 mm, KUKKO · Operating principle: Access is gained to the bearing rings. To do this, the ball cage must be destroyed. Subsequently, the ball segments of the puller, corresponding to the balls of the bearing, are inserted between the inner and outer rings of the bearing and secured by rotating them 90º. After screwing the puller bolts of the puller device into the puller segments, these are positioned in the crossbar of the puller device. The removal process then takes place by tightening the pressure spindle of the puller device against the shaft on which the bearing is mounted. · Other technical features: Weight: 1.09 kg Kdsdpsz Uz Eysfx Ag Aju · Packaging: L-Boxx mini

Condition: used, Ball bearing removal/extraction tool 24, clamping width 60-160mm, 24-B in 2x L-Boxx, KUKKO · Complete set · Includes internal extractors and counter supports, as well as two-arm universal extractors. Application: universally applicable, for removing ball bearings, bearings, gears, inner rings of shoulder bearings, deep groove ball bearings, etc. · Also suitable for removing tightly fitting ball bearings, outer rings of ball bearings, and bushings. * Each item consists of 2 cases. · Supplied in a robust "L-BOXX". Ksdpfez Ut Elsx Ag Ajdu · Other technical features: Contents: 8 internal extractors 12 - 70 mm, 2 counter supports 5 - 40 mm and 18 - 70 mm, 1 puller chuck, 1 battery terminal puller 55 mm, 2 two-arm pullers 80 and 160 mm. · Packaging: in 2 x L-Boxx.

Condition: new, Ball bearing removal/extraction tool 24, clamping width 60-90mm, 24-A in 2x L-Boxx, KUKKO · Complete set Ksdpfx Agjz Thtno Asdu · Includes internal extractors and counter supports, as well as two-arm universal extractors. Application: universally applicable, for removing ball bearings, bearings, gears, shoulder bearing inner rings, deep groove ball bearings, etc. · Also suitable for extracting tightly fitted ball bearings, ball bearing outer rings, and bushings. * The items each consist of 2 cases. · Supplied in a sturdy "L-BOXX". · Other technical features: Contents: 6 internal extractors 12 - 46 mm, 2 counter supports 5 - 40 mm and 18 - 70 mm, 1 puller chuck, 1 battery terminal puller 55 mm, 1 two-arm puller 80 mm · Packaging: in 2 x L-Boxx Contents: 6 internal extractors 12 - 46 mm, 2 counter supports 5 - 40 mm and 18 - 70 mm, 1 puller chuck, 1 battery terminal puller 55 mm, 1 two-arm puller 80 mm.

Condition: used, Internal puller set 25, 8-piece, 12-46mm, KUKKO · Complete sets · Includes internal pullers and counter supports. Application: for removing tightly fitted ball bearings, ball bearing outer rings, and bushings. · Supplied in a sturdy "L-BOXX" · Other technical features: Weight: 6.50 kg Kdsdpe Aahibefx Ag Aou · Packaging: L-Boxx

Condition: used, Internal puller set 25, 10-piece, 12-70mm, KUKKO Kodpfxjz Ud R So Ag Ajdu · Complete sets · Includes internal pullers and counter supports Application: for removing tightly fitted ball bearings, ball bearing outer rings, and bushings · Supplied in a sturdy "L-BOXX" · Other technical features: Weight: 9.94 kg · Packaging: L-Boxx

Condition: used, Puller set K-2030, 11-piece. Spreading width: 120 mm. Spreading distance: 100-350 mm. KUKKO · Two-/three-arm design · With extra-slim puller hooks · For tight spaces. Application: for removing gears, bearings, sprockets, and synchronizer sleeves. · Can be used as an external and internal puller by reversing the puller hooks. · Also suitable for removing asymmetrical workpieces. · Other technical specifications: Weight: 8.92 kg. Ksdpfx Aez Ud Tyeg Asdu

Condition: used, Puller set KS-2030, 8-piece Kdsdoz Udygjpfx Ag Aou Spreading width: 90 mm Spreading range: 100-200 mm KUKKO · Two-/three-arm design with quick adjustment and slim puller hooks · For use in tight spaces · Optimal adaptation of the spindle to the shaft through a two-sided spindle tip (ball and point)

Condition: used, Precision screwdriver set 269 T11 01, 11-piece, Slotted/PH/TX/6-point, WIHA · With combination interchangeable blades and telescopic handle · Blade length variably adjustable from 18 - 90 mm · Blades made of chrome-vanadium-molybdenum steel, Ø 4 mm · Matt chrome-plated Kdsdpsz Ub Ubefx Ag Aeu · ChromeTop® blade tips Contents: 1 SoftFinish® multi-component telescopic handle (110 mm) 1 blade each for slotted screws, sizes 1.5 - 3.0 / 2.0 - 3.5 / 2.5 - 4.0 mm 1 blade each for screws with cross-recessed (PH) heads, size 1 blade each for screws with internal TORX® profile, sizes T 6 - 8 / 7 - 9 1 blade each for screws with internal hexagonal profile, sizes 1.5 / 2.0 / 2.5 mm (1 side hexagonal / 1 side hexagonal with ball head) · Other technical features: Contents: 11-piece · Material: Chrome-vanadium-molybdenum steel

Condition: used, Separation tool set 17, opening A, 25-155 mm, clamping range 400 mm, KUKKO Kdjdpo Aaikyofx Ag Aeu · Complete with puller · Quick-acting clamping spindle · Special steel · User-friendly design, as the separating jaws are quickly and centrally clamped by a clamping spindle. Application: for removing ball bearings, roller bearings, inner rings and other flush-fitting parts, especially for automotive, agricultural and industrial mechanics. · Other technical features: Weight: 19 kg

Condition: used, Puller 30-1, clamping diameter 100 mm, clamping width 90 mm, 6 tons, KUKKO * Three-arm design * Made of special steel Kdsdpfx Ajz T H Evog Aju * Robust construction * Three-arm pullers guarantee a particularly secure grip on the parts to be removed thanks to the even load distribution, and ensure centric removal * The puller can also be used as an internal puller by repositioning the puller hooks. Application: for removing ball bearings, bearings, gears, etc. * Can be used as an internal and external puller by rotating the puller hooks * Also suitable for removing asymmetrical workpieces * Other technical specifications: Weight: 1.53 kg * Material: Special steel

Condition: used, Puller 30-2, clamping range 150 mm, clamping width 160 mm, 7 t, KUKKO · Three-arm design · Made of special steel · Robust construction · Three-arm pullers ensure a particularly secure grip on the parts to be removed due to the even distribution of the load and allow for centric removal. · The puller can also be used as an internal puller by repositioning the puller hooks. Application: for removing ball bearings, bearings, gears, etc. · Can be used as both an external and internal puller by rotating the puller hooks. · Also suitable for removing asymmetrical workpieces. Ksdpfjz Uh Uhex Ag Aodu · Other technical features: weight: 3.82 kg · Material: special steel

Condition: used, FS Paris door handle set FS-138/353KH, aluminum, F1 D/D, for cylinders 45-65 mm, PZ DIN L/R · HOPPE aluminum fire-resistant short escutcheon door handle set for interior doors · Tested according to DIN 18273 and DIN EN 1906: 47-D1150A and PIVCERTPlus (1,000,000 test cycles) · Commercial-grade door handle set · Mounting: door handles fixed/rotatable · Return springs · HOPPE plug-in handle connection with ball-locking Sertos® · Maintenance-free plain bearings · Connection: HOPPE solid pin 9 mm · Cylinder hole (PZ) · Distance 72 mm · Substructure: steel Kdsdpfx Aoz Tp R Ueg Aou · Support cams · Fastening: concealed, continuous, threaded screws M5 · Special feature: door handles with steel cores · For door thickness 45-65 mm · Handing: DIN left/right · Additional technical features: D/D · Standard: DIN 18273 · Mounting: fixed-rotatable · Square: 9mm

Condition: used, Puller 45-5, Spanning diameter 250 mm, Spanning width 300 mm, 9.5 t, KUKKO · Three-arm design · Equipped with gear-ratio-enhanced, self-centering puller hooks · Particularly suitable for removing tightly fitted gears, sprockets, ball bearings, pulleys, etc. Application: For removing particularly tightly fitted gears, sprockets, ball bearings, pulleys, etc. Ksdpfx Ao Aag D Dsg Aodu · Other technical specifications: Weight: 5.25 kg

Condition: used, Puller 45-2, clamping range 120 mm, clamping width 120 mm, 6 t, KUKKO · Three-arm design Kodpez U A Naofx Ag Asdu · Equipped with gear-ratio enhanced, self-centering puller hooks · Particularly suitable for removing stuck gears, sprockets, ball bearings, pulleys, etc. Application: for removing particularly stuck gears, sprockets, ball bearings, pulleys, etc. · Other technical features: Weight: 1.12 kg

Condition: used, Puller 30-10, clamping range 100 mm, clamping width 120 mm, 6 t, KUKKO · Three-arm design · Made of special steel · Robust construction · Three-arm pullers guarantee a particularly secure grip on the parts to be removed due to the even load distribution and ensure centric pulling. Kodpfx Aez T Hgtog Ajdu · The puller can also be used as an internal puller by repositioning the pulling hooks. Application: for removing ball bearings, bearings, gears, etc. · Can be used as both an external and internal puller by rotating the pulling hooks. · Also suitable for removing asymmetrical workpieces. · Other technical characteristics: Weight: 1.59 kg · Material: Special steel

Condition: used, Puller tool 204-2, clamping range 100 mm, clamping width 100 mm, lateral clamping jaw, KUKKO · with lateral clamping jaw · indispensable for removing flush-fitting ball bearings, gears, sprockets, steering levers and similar parts Kjdpoz T E Tfsfx Ag Aodu · the clamping jaw presses the puller hooks firmly against the part to be removed · Further technical specifications: weight: 2.04 kg · Design: lateral clamping jaw

Condition: used, Sliding hammer set KS-22-01, KUKKO plastic case · Features an ergonomically designed sliding hammer · For removing and extracting parts with internal threads Kodpez Twpxofx Ag Aedu · Compatible with all KUKKO internal pullers · Complete with adapter for threads M3 to M10 and a special holder for threaded pins for extracting tapered or dowel pins Application: for extracting tightly fitted ball bearings, ball bearing outer rings and bushings, for extracting parts with centric threaded holes, e.g. tapered pins, cylindrical pins, etc. · Supplied in a plastic case · Other technical features: packaging – in a plastic case

Condition: used, Puller 20-20, Spanning width 150 mm, Spanning length 200 mm, 6 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adjustment of the spindle to the shaft through a 2-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by inverting the puller hooks · Also suitable for removing asymmetrical workpieces Kodpfxjz Tt Dfo Ag Aedu · Other technical features: Weight: 3.22 kg · Material: Special steel

Condition: used, Puller 44-3, Spanning width 160 mm, Spanning length 160 mm, 6 t, KUKKO · Two-arm design · Equipped with gear-ratio-enhanced, self-centering puller hooks · Particularly suitable for removing stuck gears, sprockets, ball bearings, pulleys, etc. · Optimal adjustment of the spindle to the shaft through a two-sided spindle tip (ball and point) Kdjdpfxjz Tuu Ss Ag Asu Application: for removing stuck gears, sprockets, ball bearings, pulleys, etc. · Other technical specifications: Weight: 1.9 kg

Condition: used, 4307BTVH; 4307 Kdedpfx Agez T S Amo Aou

Condition: used, Puller 20-3+ with tensioning screw, T-slot 200 mm, width 250 mm, 8.5 t, KUKKO · Two-arm design · With quick adjustment · Made of high-quality tool steel · With knurled handwheel for quick loosening and repositioning of the puller hooks without a wrench · Optimal adjustment of the spindle to the shaft through a two-sided spindle tip (ball and point) Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical specifications: Weight: 7.05 kg Kedpe Aamlnjfx Ag Ajdu · Material: High-quality tool steel

Condition: used, Puller 12-2, Spanning diameter 125mm, Spanning width 150mm, 9 tons, KUKKO Kdsdpfx Agj Aagf Ij Asu · Three-arm design · With pre-adjustable spanning range · Robust puller with excellent clamping action for removing ball bearings, gears, pulleys, etc. · With slim puller hooks for hard-to-reach areas · The required width is adjusted using the key · Slipping of the hooks from the parts to be removed is impossible Application: for removing particularly tightly fitted ball bearings, gears, pulleys and similar parts · Other technical specifications: Weight: 1.72 kg

Condition: used, Screwdriver set KK 62, 33-piece, with handle holder, WERA · Includes interchangeable blades and a handle holder with a multi-component Kraftform handle and quick-change chuck (Rapidaptor technology) with anti-roll protection Ksdoz Tyzwepfx Ag Aodu · Interchangeable blades made of molybdenum-vanadium steel · Tough and durable · For manual and power tool use (conventional cordless screwdrivers) · Contents: 1 handle holder (119 mm), 1 interchangeable blade for slotted screws, size 6.5 mm, 1 interchangeable blade with a bore and Hex-Plus technology for screws with an internal hexagonal profile (also with a locking pin), size 2 / 2.5 / 3 / 4 / 5 / 6 mm, 1 interchangeable blade for screws with a Phillips (PH) head, size 1 / 2 / 3, 1 interchangeable blade for screws with a Pozidriv (PZD) head, size 1 / 2 / 3, 1 interchangeable blade for screws with a slotted head, size 4 / 6 / 8 / 10, 1 interchangeable blade for screws with an internal TORX® profile (also with a locking pin), size T8 / 10 / 15 / 20 / 25 / 27 / 30 / 40, 1 interchangeable blade for screws with a TORQ-SET® head, size 6 / 8 / 10, 1 interchangeable blade for screws with a TRI-WING® head, size 1 / 2 / 3 / 4 (all interchangeable blades are approximately 89 mm long) · Other technical features: Material: Molybdenum-vanadium steel.

Condition: used, Bearing installation tool set 71-L for bore diameters of 10-50mm, in L-Boxx, KUKKO · Lightweight design made of impact-resistant polyacetal with a unique locking mechanism · For use on construction sites and for on-site assembly Application areas: for the safe, fast and precise installation of bearings, bushings, sealing rings and pulleys · Particularly suitable for use on construction sites and for on-site assembly Product enhancement: The impact cap is made of impact-resistant aluminum · Other technical features: Bore diameter: 10 - 50, Impact ring: 18 - 32 - 52, Impact sleeve diameter Kodpfx Ae Aaa Uijg Asdu