Used Bareiss Digitest Ii for sale (1,994)

Condition: used, Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Lrjdpezn Na Tsfx Am Uop Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: used, Year of construction: 2021, operating hours: 25 h, functionality: fully functional, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 Lsdpfx Aszn I Ucsm Ujrp • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: used, Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable test geometries. Standards: • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 Lredpfxozn I Tfo Am Usp • Measurement methods: • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. This modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with only a few steps. Due to the wide range of positioning and measuring devices offered, the digi test II is the right choice for the laboratory, production, quality assurance, and development when testing a broad product portfolio. Many shapes – one solution The modular expandability of the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not just measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually adjustable positioning device, available as an accessory for measuring individual test specimens for the digi test II as well as the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of all kinds to be clamped and fixed for measurement.

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Ljdpfxjzn I N Ho Am Usrp Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Ledpfx Amsyfmm Tj Ujrp Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Shelf 1

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Ljdpfx Ajh S Uhfjm Uerp Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). Lodpfxjziuazo Am Uorp The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Lsdszi Tmaepfx Am Usrp Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, TECHNICAL DETAILS Lrodpeuhb I Ijfx Am Uep - Durometer for production line control of soft rubber and elastomers and all natural rubber products.

Year of construction: 2001, condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Year of production 2001 Lsdpfx Amjgyz Rks Uerp Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted – used sander, in very good condition Lodpfszfpm Usx Am Uorp Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Lsdexxrhnopfx Am Uorp Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WE OFFER NICE CONDITION AMADA PRESS BRAKE CNC MACHINE WE CAN ALSO DELIVER TO THE CUSTOMER WORKSHOP-FACTORY TECHNICAL DATA Lrodpsvnzvdofx Am Ujp pressure 100 t chamfer lenght 3000 mm distance between columns 2700 mm Control AMADA AMNC II-PC throat 415 mm stroke 200 mm dayligth 500 mm adjustment of the rear stops 600 mm table width 60 mm number of controlled axis 7 ajustment speed 200 mm/sec bending speed 20 mm/sec POWER 5,3 kW WEIGHT 6,7 t DIMANSIONS:

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Ledpfexbd U Ejx Am Uorp

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Ljdpfxev Uvdpo Am Uorp Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Lrodpfoy E Snqex Am Uop Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: good (used), functionality: fully functional, In this offer you are purchasing a ‘Canon RCT 2 / II’ finishing option as good as new Object of sale: 1 x Canon RCT II suitable for various Canon models Counter readings: Total: Approx. 555 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Lredpfou Rbb Nex Am Uep For further information you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,960 h, functionality: fully functional, machine/vehicle number: 238911, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,325 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Lrjdezi Ai Rspfx Am Usp Travel range, X-axis: 1,400 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,325 mm Table area (L x W): 800 x 800 mm Spindle speed: 8,000 rpm Spindle torque: 1,218 Nm Tool changer positions: 80 MACHINE DETAILS Number of pallets: 2 Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 3,000 x 3,500 mm Weight: approx. 30,800 kg Operating Hours (according to image) Operating hours: 54,415 h Power-on hours: 30,498 h Cutting hours: 25,960 h EQUIPMENT Tool magazine for 80 tools, SK 50 DIN69871 Air blow-off device on the workpiece Interface for high-pressure cooling system 70 bar, Knoll Chip conveyor Preparation for Mazak Monitoring System B, optical probe type OMP60 Synchronized tapping Rapid traverse with constant pitch during angular movements 2-pallet changer Spindle with increased torque NC rotary table with 360,000 positions MAZAK Monitoring System B, optical probe type OMP60 Automatic tool length measurement

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! Lrodpezln D Eofx Am Usp TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Lrodpfeyh N Aaox Am Ujp Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Condition: used, Year of construction: 2008, functionality: unexamined, Star SR-20R II sliding head CNC lathe Year (2008) with Fanuc Series 18i-TB control Parts conveyor LNS Turbo HB swarf conveyor FMB Mini Mag 20 / 3200 barfeed Lrsdpfxjzmalkj Am Ujp 2 available

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Lsdpfxszb Eg Rj Am Uerp Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: excellent (used), Year of construction: 2011, Model Amada HFE M2 103t x 3110 3m, 4 axis Press Brake Year 2011 Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Ljdpfxjyym Hws Am Usrp guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: excellent (used), functionality: fully functional, EKOCHEM Underwater Granulation Head RW-440-II - Water Ring Granulation - WRG The EKOCHEM RW-440-II is a high-performance underwater granulation head for processing a wide variety of polymer materials. Its robust construction, pneumatic knife pressure system, and closed water circuit ensure reliable and economical operation, even with high throughput rates. A suitable centrifuge for drying the granules is already installed together with the granulation unit. Technical Data * Model: RW-440-II * Throughput: 600–1,500 kg/h * Number of granulation knives: 4 * Cutting knife speed: 2,910 rpm * Cutting knife drive power: 3.0 kW * Heating zone power: 3.8 kW * Max. operating temperature: 280 °C * Max. permissible melt pressure: 120 bar Features / Advantages Lrodoznu S Ujpfx Am Usp * Compact and robust design * Pneumatic knife pressure system * Precise knife centering thanks to linearly guided knife holder * Fast and easy knife change * Free access to the interior for maintenance work * Short setup and maintenance times * Suitable for a wide range of polymer materials * Granule size can be individually adjusted The system is in very good condition, fully functional, and immediately available from stock. An inspection can be arranged at any time.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, table length: 900 mm, table width: 300 mm, Travel distances: Travel – X: 500 mm Travel – Y: 350 mm Travel – Z: 400 mm Grinding wheel: 400 x 50 x 127 Table size: 900 x 300 mm Installation dimensions: approx. Width: 2500 Depth: 2000 Height: 2100 Lrsdeznly Nspfx Am Uep